Attachments: I will code your EAs and Indicators for no charge

I will code your EAs and Indicators for no charge

#12,721
Apr 7, 2016 9:03am Apr 7, 2016 9:03am

Getmoney
| Joined Feb 2015 | Status: Trader | 15 Posts

Can any help and add shift to this bb stop indicator

Attached File(s)

BBands_Stop_v1.mq4 5 KB | 482 downloads

#12,722
Apr 7, 2016 9:06am Apr 7, 2016 9:06am

Don96
Joined Dec 2015 | Status: Trader | 7,803 Posts

Quoting cyber1

Disliked

{quote} Don- There are some good indicators that already do that nicely. Seems redundant to add to this indi.

Ignored

it was just so it was all included in one indicator

#12,723
Edited 10:00am Apr 7, 2016 9:28am | Edited 10:00am

ionone
| Commercial User | Joined Oct 2014 | 447 Posts

i made an EA that is quite profitable but only works in "control Point" mode. It is very simple algorithm based on Ichimoku

is there a way to "make it work" in tick mode?

look a the equity curve (and stoploss only 0.01% of Close[])

Attached Image (click to enlarge)

Click to Enlarge

Name: Sans titre-1.jpg
Size: 52 KB

Attached File(s)

Ichimoku03.mq4 4 KB | 720 downloads

EDIT: use 1H TF and EURUSD, didn't test in other pairs

#12,724
Apr 7, 2016 9:56am Apr 7, 2016 9:56am

ionone
| Commercial User | Joined Oct 2014 | 447 Posts

oh you will need that as well

Attached File(s)

Ichimoku.mq4 7 KB | 602 downloads

#12,725
Apr 7, 2016 10:30am Apr 7, 2016 10:30am

vidarsha
| Joined Jan 2016 | Status: Trader | 3 Posts

Quoting wolfsch

Disliked

{quote} Vidarsha this trading system is heavyly repainting!!!!and dont use it in an EA!

Ignored

thanks for your reply...!

#12,726
Apr 7, 2016 12:10pm Apr 7, 2016 12:10pm

Idris.Brazil
Joined Mar 2015 | Status: Trader | 253 Posts

Quoting cyber1

Disliked

{quote} Idris- I've been watching it all week and it seems to work properly. I have made minor changes to it so try this version. {file}

Ignored

Hello CYBER1,

OK - many thanks.

I will test again / double check and let you know the results asap.

Best regards,

#12,727
Apr 7, 2016 1:45pm Apr 7, 2016 1:45pm

angelfx922
| Joined Mar 2010 | Status: Trader | 28 Posts

Hi,

Can anyone help me with this:

-The Dynamic Fib grid levels is based of all timeframes under one chart (single lanes) 1M, 5M, 15M, 30M and 1H.
I would like to add to the different lanes this other indicator attached (Fractals).

Attached File(s)

Fibo Grid Levels.mq4 9 KB | 578 downloads

Attached File(s)

RimiFX El Farol.ex4 18 KB | 498 downloads

#12,728
Apr 7, 2016 2:17pm Apr 7, 2016 2:17pm

afsarfx
| Joined Apr 2015 | Status: Trader | 63 Posts

hello coders please can u combine 4 indiators
1 macd zero line trnd
2 ema cross over
3 parabolic sar
4 stochastic crossover oversold overbought
all matching 4 in buy direction add aleart
all matching 4 in sell direction add aleart

display only all 4 match arrow

Attached Image

#12,729
Apr 7, 2016 2:31pm Apr 7, 2016 2:31pm

angelfx922
| Joined Mar 2010 | Status: Trader | 28 Posts

Here is the chart for the FIb lanes...and the fractals are the ones numbered on the other chart

Attached Image (click to enlarge)

$Click to Enlarge Name: GBPUSDM15 fractals.png Size: 61 KB$

Attached Image

Quoting angelfx922

Disliked

Hi, Can anyone help me with this: -The Dynamic Fib grid levels is based of all timeframes under one chart (single lanes) 1M, 5M, 15M, 30M and 1H. I would like to add to the different lanes this other indicator attached (Fractals). {file} {file}

Ignored

In order to see it work as a whole here are all the indicators:

Attached File(s)

FxPM indicator grid.zip 99 KB | 631 downloads

#12,730
Apr 7, 2016 9:56pm Apr 7, 2016 9:56pm

lukeb
Joined Dec 2009 | Status: Trader | 250 Posts

Quoting billsmith

Disliked

{quote} can anyone help me

Ignored

Got this - will have a toy for you before Monday.

#12,731
Apr 7, 2016 11:36pm Apr 7, 2016 11:36pm

praful_patat
| Joined Oct 2009 | Status: Trader | 121 Posts

Hi
Can you please code for attaching file for EA its very nice indicator.

Attached File(s)

TMT Scalper Word.docx 214 KB | 675 downloads

TMT Scalper.zip 91 KB | 705 downloads

#12,732
Apr 8, 2016 3:45am Apr 8, 2016 3:45am

Binary3000
| Joined Aug 2014 | Status: Trader | 10 Posts

Hi Everyone

I'm not looking for someone to code my EA, because I already wrote it myself. I am, however, new to programming and I've been stuck now for weeks, and hope someone can help me with this last hurdle. At the moment everything seems to work, except for one thing. The EA will open two pending orders (buystop and sellstop), when there are no open orders(OrdersTotal==0). When the one pending order is triggered the other one is deleted. The open order will then either hit a trailingstop when the trade goes my way, or open a hedge(martingale) trade when the trade goes against me. I only want this last trade to execute once. In other words I need to limit the trade to the one original trade and only one hedge trade. If this hedge trade also go against me, it must hit the stoploss and not open another hedge, even if the first original trade is still in a loss. I have tried everything, but I am unable to limit this, without also limiting something else.
Here are some attempts:

Inserted Code

if(OrderOpenPrice()>Bid+Hedge*point && buy_ticket==1 && sell_ticket<=1)
            {
              sell_ticket=OrderSend(Symbol(),OP_SELL,HedgeLots,Bid,3,Bid+StopLossHedge*point,0,"Hedge",magic,0,Red);
            }  
        }
//Same for Sell

and

Inserted Code

else if(total<=2 && OrderOpenPrice()>Bid+Hedge*point)
        {
         sell_ticket=OrderSend(Symbol(),OP_SELL,HedgeLots,Bid,3,Bid+StopLossHedge*point,0,"Hedge",magic,0,Red);
        }

This is the type of results I get:
576 2015.01.15 11:39 buy stop 29 0.48 1.16786 1.16616 0.00000 0.00 4834.24
577 2015.01.15 11:39 sell stop 30 0.48 1.16642 1.16812 0.00000 0.00 4834.24
578 2015.01.15 11:39 sell 30 0.48 1.16642 1.16812 0.00000 0.00 4834.24
579 2015.01.15 11:39 delete 29 0.48 1.16786 1.16616 0.00000 0.00 4834.24
580 2015.01.15 11:42 buy 31 1.44 1.16743 1.16653 0.00000 0.00 4834.24
581 2015.01.15 11:42 s/l 31 1.44 1.16653 1.16653 0.00000 -129.60 4704.64
582 2015.01.15 11:44 buy 32 1.44 1.16742 1.16652 0.00000 0.00 4704.64
583 2015.01.15 11:44 s/l 30 0.48 1.16812 1.16812 0.00000 -81.60 4623.04
584 2015.01.15 11:48 modify 32 1.44 1.16742 1.16893 0.00000 0.00 4623.04

The buystop and sellstop orders (29 and 30) are opened as they should. The price then drops and the sell order (30) gets filled while the buystop (29) gets deleted. The price then goes up again and the hedge(martingale) order (31) gets triggered (3*lotsize). The price then drops again and the hedge (31) gets stopped out, but because 30 is still open it triggers another hedge (32), etc. How can I prevent order 32 from getting triggered? Thank you very much

#12,733
Apr 8, 2016 4:16am Apr 8, 2016 4:16am

Retlaw
| Commercial User | Joined Dec 2014 | 143 Posts

Quoting Binary3000

Disliked

........The buystop and sellstop orders (29 and 30) are opened as they should. The price then drops and the sell order (30) gets filled while the buystop (29) gets deleted. The price then goes up again and the hedge(martingale) order (31) gets triggered (3*lotsize). The price then drops again and the hedge (31) gets stopped out, but because 30 is still open it triggers another hedge (32), etc. How can I prevent order 32 from getting triggered? Thank you very much

Ignored

You could work with a flag for the hedge order, something like HedgeOrderOpen = true. Now as soon as there are no more open orders you then set that flag back to false.

#12,734
Apr 8, 2016 4:35am Apr 8, 2016 4:35am

lghr
Joined Feb 2013 | Status: Trader | 676 Posts

Quoting ionone

Disliked

i made an EA that is quite profitable but only works in "control Point" mode. It is very simple algorithm based on Ichimoku is there a way to "make it work" in tick mode? look a the equity curve (and stoploss only 0.01% of Close[]) {image} {file} EDIT: use 1H TF and EURUSD, didn't test in other pairs

Ignored

Your ea is not full, can't modify.

#12,735
Apr 8, 2016 5:58am Apr 8, 2016 5:58am

arfhnf
| Joined Jan 2016 | Status: Trader | 1 Post

Hi,
Can someone add push notification to this indicator.
Thanks for your help.
Regards

Attached File(s)

BUY-SELL.SIGNAL.mq4 3 KB | 550 downloads

#12,736
Apr 8, 2016 9:01am Apr 8, 2016 9:01am

Kunay9
| Joined Feb 2016 | Status: Trader | 90 Posts

if someone got spare time i got this idea to code

http://www.forexfactory.com/showthre...38#post8862438

Attached Image

#12,737
Apr 8, 2016 9:38am Apr 8, 2016 9:38am

vidarsha
| Joined Jan 2016 | Status: Trader | 3 Posts

hi,
please can anyone can help to create ea like this?

Attached Image (click to enlarge)

Click to Enlarge

Name: EURUSDM1v.png
Size: 27 KB

Attached File(s)

Non Repainting SuperTrend.zip 6 KB | 664 downloads

#12,738
Apr 8, 2016 9:41am Apr 8, 2016 9:41am

ionone
| Commercial User | Joined Oct 2014 | 447 Posts

Quoting lghr

Disliked

{quote} Your ea is not full, can't modify.

Ignored

are you talking about Ichimoku.mq4 ? i posted another post with the indicator earlier

here it is again

Attached File(s)

Ichimoku.mq4 7 KB | 533 downloads

i agree that i didn't put SL and TP in "extern" but it's just a draft.

could you make it work in tick mode? it would be an amazing EA!

thanks a lot!

Jeff

#12,739
Apr 8, 2016 12:36pm Apr 8, 2016 12:36pm