I will code your EAs and Indicators for no charge

Quoting classy

Disliked

my humble request to all master coders specially cja, TT and br , if possible please create one multi pair dash board based on attached indicator and show red and green % pairs high to low and must group pair option for example all eur ,all gbp ,all yen etc along with at least 4h candle pips change number and % i think it will be grate tool to monitor .thanks in advance. {file} {image} {image}

Ignored

Quoting dantpm

Disliked

I am looking for an EA for trade management. Key features to include, Open trade at market, stop and limit prices. Close trade, close all profitable trades, close all losing trades, close all trades. When opening a trade set and monitor a ghost TP at a fixed level or points from entry price. When entering a trade set and monitor a ghost SL and Trailing Stop at a fixed level or number of points from the entry price. Allow for managing ghost TP, SL, and TS levels. Allow or automatically splitting orders ie instead of entering 10 lots in one order,...

Ignored

Quoting jeanlouie

Disliked

{quote} I had it running for a while with some ma's on it, no issue came up (though there is an issue with the ma values in mtf being live and not staircase). Unless I can recreate the issue there is nothing to go on.

Ignored

Quoting Badguy

Disliked

Maybe https://www.forexfactory.com/thread/...anager-mt4-mt5 {quote}

Ignored

Quoting Samalin

Disliked

Good Day Coders please i will appreciate if you will help make this a 2bar fractal and help to make the lines adjust once, i had to change it 2times and yet it will not stay i say 2bar because i have never experience seeing the fractal print, i have only experience when price break fractal points, i use as a support system {file} {image}

Ignored

Quoting classy

Disliked

{quote} please if possible than create one multipair dashboard with attached indicator .thanks

Ignored

Quoting BlueRain

Disliked

{quote} I don't do much coding any more but this may work for you. it is daily move % by default but you can change time frame. {file} {image}

Ignored

Quoting jeanlouie

Disliked

{quote} You would not notice any difference in either 4/5 when using predefined arrays inside oncalc, or timeseries functions for the current sym/tf. The 2 indicators also work differently, the mt4 indicator only uses the chart candle times and decides on new day/week/month on those times, the mt5 indicator gets higher tf times for use, which is where the timeseries functions come in, and decides on new day/week/month times that way. The mt5 indicator could use time[]/open[]/etc arrays inside oncalc.

Ignored

//+------------------------------------------------------------------+
//|                                                 HiLoChannel.mq5  |
//|                                                                  |
//+------------------------------------------------------------------+
#property copyright "Testing"
#property link      "https://www.google.com/"
#property description "PrevHiLoChannel"
#property indicator_chart_window
#property indicator_buffers 3
#property indicator_plots   3
//---- drawing the levels as lines
#property indicator_type1   DRAW_LINE
#property indicator_type2   DRAW_LINE
#property indicator_type3   DRAW_LINE
//---- selection of levels colors
#property indicator_color1  clrBlue
#property indicator_color2  clrDarkOrange
#property indicator_color3  clrNONE
//---- selection of line style
#property indicator_style1 STYLE_SOLID
#property indicator_style2 STYLE_SOLID
#property indicator_style3 STYLE_DOT
//---- levels width is equal to 1
#property indicator_width1  1
#property indicator_width2  1
#property indicator_width3  1
//---- display levels labels
#property indicator_label1  "Channels Upper"
#property indicator_label2  "Channels Lower"
#property indicator_label3  "Channels Mid"
int min_rates_total;
input ENUM_TIMEFRAMES TimeFrame=PERIOD_W1;
double PrevWeekHiBuffer[];
double PrevWeekLoBuffer[];
double PrevWeekMidBuffer[];
int fontsize=10;
double x;
double PrevWeekHi, PrevWeekLo, LastWeekHi, LastWeekLo, PrevWeekMid;
string Space;
//+------------------------------------------------------------------+
//| Custor indicator deinitialization function                       |
//+------------------------------------------------------------------+
void OnDeinit(const int reason)
{
   Comment("");
}
//+------------------------------------------------------------------+
//| Custom indicator initialization function                         |
//+------------------------------------------------------------------+
int OnInit()
{
   //---- Initialization of variables of the start of data calculation
   min_rates_total=50;
//---- setting dynamic arrays as indicator buffers
   SetIndexBuffer(0,PrevWeekHiBuffer,INDICATOR_DATA);
   SetIndexBuffer(1,PrevWeekLoBuffer,INDICATOR_DATA);
   SetIndexBuffer(2,PrevWeekMidBuffer,INDICATOR_DATA);
//---- set the position, from which the levels drawing starts
   PlotIndexSetInteger(0,PLOT_DRAW_BEGIN,min_rates_total);
   PlotIndexSetInteger(1,PLOT_DRAW_BEGIN,min_rates_total);
   PlotIndexSetInteger(2,PLOT_DRAW_BEGIN,min_rates_total);
//---- restriction to draw empty values for the indicator
   PlotIndexSetDouble(0,PLOT_EMPTY_VALUE,EMPTY_VALUE);
   PlotIndexSetDouble(1,PLOT_EMPTY_VALUE,EMPTY_VALUE);
   PlotIndexSetDouble(2,PLOT_EMPTY_VALUE,EMPTY_VALUE);
//---- indexing buffer elements as time series  
   ArraySetAsSeries(PrevWeekHiBuffer,true);
   ArraySetAsSeries(PrevWeekLoBuffer,true);
   ArraySetAsSeries(PrevWeekMidBuffer,true);
//--- creation of the name to be displayed in a separate sub-window and in a pop up help
   IndicatorSetString(INDICATOR_SHORTNAME,"PrevHiLo_Channel");
//--- determining the accuracy of displaying the indicator values
   IndicatorSetInteger(INDICATOR_DIGITS,_Digits);
   return(INIT_SUCCEEDED);
}
//+------------------------------------------------------------------+
//| Custom indicator iteration function                              |
//+------------------------------------------------------------------+
int OnCalculate(const int rates_total,
                const int prev_calculated,
                const datetime &time[],
                const double &open[],
                const double &high[],
                const double &low[],
                const double &close[],
                const long &tick_volume[],
                const long &volume[],
                const int &spread[])
{
   int limit, i;
   
   limit=(rates_total-prev_calculated)-1;
   for(i=limit; i>=0;i--)
   {
      if (high[i+1]>LastWeekHi) LastWeekHi=high[i+1];
      if (low[i+1]<LastWeekLo) LastWeekLo=low[i+1];
      if(iTime(NULL,TimeFrame,1) != iTime(NULL,TimeFrame,0))
        {
         PrevWeekHi = LastWeekHi;
         PrevWeekLo = LastWeekLo;
         LastWeekHi = open[i];
         LastWeekLo = open[i];
         PrevWeekMid= (PrevWeekHi + PrevWeekLo)/2;
        }
      PrevWeekHiBuffer[i]=PrevWeekHi;
      PrevWeekLoBuffer[i]=PrevWeekLo;
      PrevWeekMidBuffer[i]=PrevWeekMid;
   }
   return(rates_total);
}

Quoting BlueRain

Disliked

{quote} Ya no codifico mucho, pero esto puede funcionar para ti. De forma predeterminada, el porcentaje de movimiento diario es pero puedes cambiar el período de tiempo. {archivo} {imagen}

Ignored

Quoting jeanlouie

Disliked

{quote} SR_Equal_HL - v1.1 - finds equal high and lows within a point margin - full alerts {file} {image}

Ignored

Quoting GenericPanda

Disliked

{quote} Thanks again for the answer. I am sorry if I am still confused, I think I do understand that both shouldn't have any significant difference in performance. However, somehow my MT5 indicator sometimes doesn't load whenever I tried to change symbol. It takes a while for it to show the channels. In comparison MT4 seamlessly load, so I am trying to use the predefined array inside of oncalc instead of timeseries functions. I don't really understand much on how timeseries function operates, but I tried to translate the MT4 indicator logic to MT5,...

Ignored

Quoting Fiox89

Disliked

{quote} Thanks, much appreciated. The notifications work, but for some reason at the close of the candle new notifications are sent and new lines are drawn in the price history, even if the current price has not generated any new signals

Ignored

Quoting jeanlouie

Disliked

{quote} - you're still using itime() with a different tf to the chart tf, only if the tf is the same as the chart or the data has already been collected, will there be no delay - the itime() functions are not looping with the loop, the shift values are always 1 and 0 - the itime() check inside the if() will always return true, time0 will always not equal time1, or time(i) and time(i+1) - to check a new period using higher tfs, (new hour, day, month etc) you would need to compare the current candle time, and the candle time before it, and see if...

Ignored