I will code your EAs and Indicators for no charge

except lots, you should say direction clearly.
test.

http://www.forexfactory.com/showthre...36#post9489436 ............... please any one make this to refresh ... i need to change the time frame and back to watch time frame if any low or high made... if it gets automatic refresh then it will be great..

Hello good fellows

I need EA that can place 10 buy stop(pending orders) and 10 sell stop(pending orders) with the following rules:
BUY ORDERS:
Order 1 Entry: Entry price(my specified price)
Set take profit 20 pips and no stop loss

Order 2 Entry: Entry price (20 pips below from price as order 1 entry price)
Set take profit Average entry price of order 1& order 2 and no stop loss (when activate pending order no. 2, all active buy orders TP will be changed at average price)

Order 3 Entry: Entry price (20 pips below from price as order 2 entry price)
Set take profit Average entry price of order 1, order 2 & order 3 and no stop loss (when activate pending order no. 3, all active buy orders TP will be changed at average price)

Order 4 Entry: Entry price (20 pips below from price as order 3 entry price)
Set take profit Average entry price of order 1, order 2 , order 3 & order 4 and no stop loss (when activate pending order no. 4, all active buy orders TP will be changed at average price)

Order 5 Entry: Entry price (20 pips below from price as order 4 entry price)
Set take profit Average entry price of order 1, order 2 , order 3, order 4, order 5 and no stop loss (when activate pending order no. 5, all active buy orders TP will be changed at average price)

Order 6 Entry: Entry price (20 pips below from price as order 5 entry price)
Set take profit Average entry price of order 1, order 2 , order 3, order 4, order 5, order 6 and no stop loss (when activate pending order no. 6, all active buy orders TP will be changed at average price)

Order 7 Entry: Entry price (20 pips below from price as order 6 entry price)
Set take profit Average entry price of order 1, order 2 , order 3, order 4, order 5, order 6, order 7 and no stop loss (when activate pending order no. 7, all active buy orders TP will be changed at average price)

Order 8 Entry: Entry price (20 pips below from price as order 7 entry price)
Set take profit Average entry price of order 1, order 2 , order 3, order 4, order 5, order 6, order 7, order 8 and no stop loss (when activate pending order no. 8, all active buy orders TP will be changed at average price)

Order 9 Entry: Entry price (20 pips below from price as order 8 entry price)
Set take profit Average entry price of order 1, order 2 , order 3, order 4, order 5, order 6, order 7, order 8, order 9 and no stop loss (when activate pending order no. 9, all active buy orders TP will be changed at average price)

Order 10 Entry: Entry price (20 pips below from price as order 9 entry price)
Set take profit Average entry price of order 1, order 2 , order 3, order 4, order 5, order 6, order 7, order 8, order 9, order 10 and no stop loss (when activate pending order no. 10, all active buy orders TP will be changed at average price)


and

SELL ORDERS:

Order 1 Entry: Entry price(my specified price)
Set take profit 20 pips and no stop loss

Order 2 Entry: Entry price (20 pips Above from price as order 1 entry price)
Set take profit Average entry price of order 1& order 2 and no stop loss (when activate pending order no. 2, all active SELL orders TP will be changed at average price)

Order 3 Entry: Entry price (20 pips Above from price as order 2 entry price)
Set take profit Average entry price of order 1, order 2 & order 3 and no stop loss (when activate pending order no. 3, all active SELL orders TP will be changed at average price)

Order 4 Entry: Entry price (20 pips Above from price as order 3 entry price)
Set take profit Average entry price of order 1, order 2 , order 3 & order 4 and no stop loss (when activate pending order no. 4, all active SELL orders TP will be changed at average price)

Order 5 Entry: Entry price (20 pips Above from price as order 4 entry price)
Set take profit Average entry price of order 1, order 2 , order 3, order 4, order 5 and no stop loss (when activate pending order no. 5, all active SELL orders TP will be changed at average price)

Order 6 Entry: Entry price (20 pips Above from price as order 5 entry price)
Set take profit Average entry price of order 1, order 2 , order 3, order 4, order 5, order 6 and no stop loss (when activate pending order no. 6, all active SELL orders TP will be changed at average price)

Order 7 Entry: Entry price (20 pips Above from price as order 6 entry price)
Set take profit Average entry price of order 1, order 2 , order 3, order 4, order 5, order 6, order 7 and no stop loss (when activate pending order no. 7, all active SELL orders TP will be changed at average price)

Order 8 Entry: Entry price (20 pips Above from price as order 7 entry price)
Set take profit Average entry price of order 1, order 2 , order 3, order 4, order 5, order 6, order 7, order 8 and no stop loss (when activate pending order no. 8, all active SELL orders TP will be changed at average price)

Order 9 Entry: Entry price (20 pips Above from price as order 8 entry price)
Set take profit Average entry price of order 1, order 2 , order 3, order 4, order 5, order 6, order 7, order 8, order 9 and no stop loss (when activate pending order no. 9, all active SELL orders TP will be changed at average price)

Order 10 Entry: Entry price (20 pips Above from price as order 9 entry price)
Set take profit Average entry price of order 1, order 2 , order 3, order 4, order 5, order 6, order 7, order 8, order 9, order 10 and no stop loss (when activate pending order no. 10, all active SELL orders TP will be changed at average price)

Thank you.

Hllo!I am looking for a Hedge EA v 1.7 or 1.9 or similar Ea"s,which coorrect my lossing position into winning.
Thanks for answer.
Alex

p.s.i mean Hedge EA Advanced v 1.7 or v 1.9

Hi Experts,

Can some please provide me below condition mt4 indicator :-

If period separator candle that is the Opening candle if Open=high then sell arrow and Open=Low then buy arrow....timeframe 5 mins/ Or a multi timeframe will also do...

Thanks in advance

Nishant P.

modifed.

Good Morning dear coder friends,

May I request you smart coders to modify this simple oscillator indicator.
There are three lines (blue, orange and red) in this indicator. If the blue line crosses over the orange line in the overbrought (above 70) or oversold areas (below 30) and move out of these overbrought and oversold areas, can you please add an alert.

Also if possible, could you create an EA which places a buy order once the blue and orange lines move out of the oversold area after crossing in the oversold area with a stop loss of 100 pips and target of 100 pips and places a sell order if the blue and orange lines move out of the overbrought area after crossing in the overbrought area with a stop loss of 100 pips and target of 100 pips.
Once in a profit of 25 pips, we move the stop to 5 pips.

Please find attached a screenshot of the expected results.
The red arrows show when to place the sell signal (we do so since the lines crossed over in the overbrought area) and the green arrows show when to place a buy order (we do so since the lines crossed over in the oversold area).

Appreciate your help my coder friends.

Thanks
NK7

fix a mistake.

i dont understand ...

can u please fix this indi that i can put it on the charts besides the pair GBPJYP? and when you can that i can change the tp and sl size? that would be very nice

it puts a line at the high and close of the first h4 candle of the week with a buffer of 20 points, if i can change this to an other value would be cool.


thanks


its from the h4 breakout thread

is tihs indicator repaints or not please any one great coding professionals please

Load on one minute chart and track draw lines and in an hour you will know your self

Thanks

http://www.forexfactory.com/showthre...76#post9439776

IS THIS REASON TO NOT GET LINE WIDTH TO 2 SIZE FOR THOSE THICK LINES...

ok i will check tomorrow
thank you

Hi Traders , Please try explain to me how to use stop/loss , If it was EURUSD , using 200 pips stop/loss ???/
How to calculete , Please ,

Any one is come either adr reached or not reached... But here it is both coming... Any error means please correct this

OK, I've been working on this and starting "simple" (for other people, not me) by just creating a second buffer with a second indicator displaying candle high/low. It's debugged but the second indicator line is not showing Can you take a look and see where I've gone wrong?

Here are the two codes, the original and the second one that I am attempting to modify:


ORIGINAL:

//+------------------------------------------------------------------+
//| Candle_Range_OpenClose_Absolute.mq4 |
//| Rex Tradewell |
//|
//+------------------------------------------------------------------+
#property copyright "Rex Tradewell"
#property link ""
#property indicator_separate_window
#property indicator_buffers 1
#property indicator_color1 SkyBlue
#property indicator_width1 3
double Range_Buffer[];
int PipFactor = 1;
//+------------------------------------------------------------------+
//| Custom indicator initialization function |
//+------------------------------------------------------------------+
int init()
{
//---- indicators
//---- drawing settings
SetIndexStyle(0,DRAW_LINE);
SetIndexBuffer(0,Range_Buffer);
SetIndexLabel(0,"Range");

//---- name for DataWindow and indicator subwindow label
IndicatorShortName("Candle Range");
IndicatorDigits(1);
// Cater for fractional pips
if (Digits == 3 || Digits == 5)
{
PipFactor = 1;
}
//---- initialization done
return(0);
}
//+------------------------------------------------------------------+
//| Custom indicator deinitialization function |
//+------------------------------------------------------------------+
int deinit()
{
//----

//----
return(0);
}
//+------------------------------------------------------------------+
//| Custom indicator iteration function |
//+------------------------------------------------------------------+
int start()
{
int limit;
int counted_bars=IndicatorCounted();
//---- last counted bar will be recounted
if(counted_bars>0) counted_bars--;
limit=Bars-counted_bars;
for(int i=0; i<limit;i++)
Range_Buffer[i]=MathAbs((Open[i]-Close[i])/Point)/PipFactor;
//---- done
return(0);
}
//+------------------------------------------------------------------+


MODIFIED:
//+------------------------------------------------------------------+
//| Candle_Range_separate_BullBear.mq4 |
//| Rex Tradewell |
//|
//+------------------------------------------------------------------+
#property copyright "Rex Tradewell"
#property link ""
#property indicator_separate_window
#property indicator_buffers 2
#property indicator_color1 SkyBlue
#property indicator_width1 3
#property indicator_color2 Red
#property indicator_width2 3
double Range_Buffer[];
int PipFactor = 1;
//+------------------------------------------------------------------+
//| Custom indicator initialization function |
//+------------------------------------------------------------------+
int init()
{
//---- indicators
//---- drawing settings
SetIndexStyle(0,DRAW_LINE);
SetIndexStyle(1,DRAW_LINE);
SetIndexBuffer(0,Range_Buffer);
SetIndexBuffer(1,Range_Buffer);
SetIndexLabel(0,"Range");
SetIndexLabel(1,"Range");

//---- name for DataWindow and indicator subwindow label
IndicatorShortName("Candle Range BullBear");
SetIndexLabel(0,"Bull");
SetIndexLabel(1,"Bear");
IndicatorDigits(2);
// Cater for fractional pips
if (Digits == 3 || Digits == 5)
{
PipFactor = 1;
}
//---- initialization done
return(0);
}
//+------------------------------------------------------------------+
//| Custom indicator deinitialization function |
//+------------------------------------------------------------------+
int deinit()
{
//----

//----
return(0);
}
//+------------------------------------------------------------------+
//| Custom indicator iteration function |
//+------------------------------------------------------------------+
int start()
{
int limit;
int counted_bars=IndicatorCounted();
//---- last counted bar will be recounted
if(counted_bars>0) counted_bars--;
limit=Bars-counted_bars;
//--- Bull counted in the 1-st buffer
for(int i=0; i<limit;i++)
Range_Buffer[i]=MathAbs((Open[i]-Close[i])/Point)/PipFactor;
//--- Bear counted in the 2-nd buffer
Range_Buffer[i]=MathAbs((High[i]-Low[i])/Point)/PipFactor;
//---- done
return(0);
}
//+------------------------------------------------------------------+

Hello ,it is a loss recovery ea.

i need this heiken ashi dashboard indicator if someone have please post.