I will code your EAs and Indicators for no charge | Page 855 | Crypto Craft

Options

Go to
Permalinks
Print Thread

Similar Threads

I will code your pivot EAs for no charge 28 replies

I will code your scalping EAs for no charge 163 replies

Oanda MT4 - Indicators and EAs not showing 2 replies

EAs and indicators relating to moutaki... 22 replies

InterbankFX has loaded its MT4 platform with custom EAs, indicators and scripts 1 reply

Attachments: I will code your EAs and Indicators for no charge
Exit Attachments

I will code your EAs and Indicators for no charge

  • #17,081
  • Jan 1, 2017 12:41pm Jan 1, 2017 12:41pm
Hi great coders I have been looking for an EA or script that can open positions for different symbols of my choosing all at once at the same time.For instance I want to open buy EUR/USD , sell GBP/JPY , buy USD/CHF , sell GBP/USD , sell USD/JPY all at once at the same time.I will be glad if someone can send me a link to download the EA or script but I cant find any script or EA like that because i cant find any on the internet.Thank you.
Goal of a successful trader is to make the best trades. Money is secondary
  • #17,082
  • Jan 1, 2017 12:56pm Jan 1, 2017 12:56pm
Dear Coder,

please help me, just little modification on this EA,

need just get alert one time, ( here get continue alert... )

i need just one time alert, if get buy arrow then one time get alert BUY, and change arrow then alert SELL

thanks in advance,

please please help me, little modification

Attached Image (click to enlarge)
Click to Enlarge Name: Untitled.png Size: 18 KB
Attached File(s)
File Type: mq4 The Jesing Magic V6 - MultiTrend .mq4   29 KB | 574 downloads
Always Feel Good...
  • #17,083
  • Jan 1, 2017 1:33pm Jan 1, 2017 1:33pm
Hello. I'm wondering whether anyone out there would kindly help to add an email and push notification alert to the indicator attached?

I would like an alert each time a new box is created, and each time a candle "touches" the box (so not only when the candle closes).

Any help would be greatly appreciated!

Attached File(s)
File Type: mq4 SupDem3.mq4   28 KB | 529 downloads
  • #17,084
  • Jan 1, 2017 4:52pm Jan 1, 2017 4:52pm
Quoting JellyBaby
Hello. I'm wondering whether anyone out there would kindly help to add an email and push notification alert to the indicator attached? I would like an alert each time a new box is created, and each time a candle "touches" the box (so not only when the candle closes). Any help would be greatly appreciated! {file}
Hello,

Could you explain more how you use this indicator?
Pair?
TimeFrame?
  • #17,085
  • Jan 1, 2017 6:18pm Jan 1, 2017 6:18pm
Quoting jesing
Dear Coder, please help me, just little modification on this EA, need just get alert one time, ( here get continue alert... ) i need just one time alert, if get buy arrow then one time get alert BUY, and change arrow then alert SELL thanks in advance, please please help me, little modification {image} {file}
a little modification????? The code has 97 warnings?? also you cannot simply have code that says if(up>down)Alert("up"); or it will continually alert on every tick, have you tried looking at other alert code in any indicators or ea's?? The other thing you have not allowed for is the No Signal arrow/symbol so the way you currently have it the display and Alerts appear to be out of sync because you can get a SELL Arrow when the Alert is signalling BUY when in fact it should be signalling NO SIGNAL and the BUY Alert is actually the last valid signal. Put in a piece of M15 code like this" Comment("M15 up "+SumUpsM15+" M15 down "+SumDownsM15);" and see what the numbers are doing and that will tell you exactly why you need the NO SIGNAL code included into the Arrows and Alerts.
Trade what you see not what you hope
  • #17,086
  • Jan 1, 2017 10:52pm Jan 1, 2017 10:52pm
Quoting DaPerk
I need some good coder for long term cooperation. Contact me please

I can code.But not for free. I will charge you.
  • #17,087
  • Jan 2, 2017 1:53am Jan 2, 2017 1:53am
Quoting cja
{quote} This is a basic way of coding the lines, I hope this helps. {file} {image}
CJA
Thanks again for the indicator.
Did a few change to the code
Changed
"TMS1"
"TMS2"
To
string TMS1 = "TMS1";
string TMS2 = "TMS2";

Changed
// Calc TDI data
for(i=iNewBars-1; i>=0; i--)
{
RSIline[i] = iRSI(NULL,0,RSI_Period,RSI_Price,i);
}
for(i=iNewBars-1; i>=0; i--)
{
Greenline[i]=iMAOnArray(RSIline,0,Green_Period,0,Green_Mode,i);
Redline[i]=iMAOnArray(RSIline,0,Red_Period,0,Red_Mode,i);
}
To
// Calc TDI data
for(i=iNewBars-1; i>=0; i--)
{
RSIline[i] = iRSI(NULL,0,RSI_Period,RSI_Price,i);
Greenline[i]=iMAOnArray(RSIline,0,Green_Period,0,Green_Mode,i);
Redline[i]=iMAOnArray(RSIline,0,Red_Period,0,Red_Mode,i);
}

Removed
else{ ObjectMove("TMS1"+i, 0,Time[i],Time[i]);
so that it does not shift to right.

After the condition check code:
Any "do this" code can be placed.
Trying only to have one v-line on chart. Have tried various methods

Removed the +i from TMS1 / TMS2

Substituted the following code:
ObjectDelete(0,TMS2 );
int time = 0;
if(!time)time=TimeCurrent();
ObjectCreate(0,TMS1 ,OBJ_VLINE,0,time,0);
ObjectSetInteger( 0, TMS1 ,OBJPROP_WIDTH,1);
ObjectSetInteger( 0, TMS1 ,OBJPROP_COLOR,Red);
ObjectSetInteger( 0, TMS1 ,OBJPROP_STYLE,2);
ObjectSetInteger( 0, TMS1 ,OBJPROP_BACK,true);

Either the indicator draws only one v-line or nothing at all or draw a v-line at every bar. +i counting is only applied to the TDI data. Removing +i variable and rename the relevant variable must surely make the indy delete the current v-line and draw a new one when the conditions are met in
if(Greenline[i]>Redline[i] && Greenline[i+1]<Redline[i+1])
or
if(Greenline[i]<Redline[i] && Greenline[i+1]>Redline[i+1])

Attached File(s)
File Type: mq4 TMS RSI Lines.mq4   4 KB | 437 downloads

Attached File(s)
File Type: mq4 TMS RSI Lines mod.mq4   4 KB | 424 downloads
  • #17,088
  • Jan 2, 2017 3:01am Jan 2, 2017 3:01am
HELLO LGHR, CJA and other coders. Please I need little help to achieve what I want to test. I have been trying for many days.
Your help will be appreciated. Attached is the code of an EA of my idea. EA has 3 Configurations, Configuration1, Configuration2, Configuration3. I have problem in Configuration2, details are as follows:

1. I open manual order BUY OE SELL depends on me.
2. THE EA afterwards takes over completely.
3. Place series of Buy stops and sell stops if Buy opened a sell stop if sell opened a buy stop with inputs for spacing, accomodation for spread, tp vaue sl value and lots, like this upto 40 input.
4. When any new pending order becomes live its tp value must be converted to all the tp values for all the before live orders and
5. ALL orders must close very fast at that tp to avoid price moving away from the target while closing. THIS IS A PROBLEM because if many orders are live example 20 it doesnt close all at the same price when tp is hit especially the reverse orders.
6. SO maybe set a SL value such that when that SL hits TP also hits and all close at the same time.
7.ONCE all orders close in TP check the last order close in tp is SELL/BUY.
8.IF BUY OPEN SELL again now the first lot by the EA not manual so an input for this separate as EALOT1 E TP1 EA SL1.[The manual was only the first time]
9. ALSO option for if BUY OPEN BUY again.
10. OPTION to close the loop: true/false if set to true after any live orders now opened close in tp shut down the EA. DONT open any more.
11. START AGAIN WHEN MANUAL ENTRY BY ME and I will set close loop to false.
THE EA is already there but some modifications are needed.
I want to back test this too in the tester so to test it option on tester screen to place buy or sell any time and run tester in the period.

AND if its not too much work for the coders can further help me to add just one indicator to the EA with the following rules please. and option to use the indicator or no as true/false.

OK use MA line 14 as indicator.
Above close BUY.
If it falls below the line and closes [and profit is not greater then 3 pips] don’t close the position wait for those [original EA] pending orders to get triggered and follow that if it got triggered, until it closed in profit.
If it falls below the line [closes] later after some bars and no pending order is hit in reverse direction upto now, check if profit is greater then 3 pips, if so close the position. OPEN reverse.
If it falls below the line [closes] later after some bars and no pending order is hit in reverse direction and if profit not greater then 3 pips let the position run until it falls below the line and closes with profit => 3 pips and if no pending order in reverse direction is hit.
If pending order in reverse direction is hit then, follow that method [original EA method] till TP is hit and close and start again when the bar closes above/below the MA.
Opton to close loop true shut down after current positions close.

THANK YOU VERY MUCH if you can assist please, awaiting your reply.

I WILL POST THE EA once anybody gets ready to do this, attached is the screenshot for the reference how it looks like.

Thank you very much, thank you once again.
  • #17,089
  • Jan 2, 2017 3:07am Jan 2, 2017 3:07am
Attached Image (click to enlarge)
Click to Enlarge Name: SCREENSHOT 1111.png Size: 91 KB
Attached Image (click to enlarge)
Click to Enlarge Name: SCREENSHOT 4.png Size: 102 KB
  • #17,090
  • Jan 2, 2017 3:22am Jan 2, 2017 3:22am
Quoting cja
{quote} Code updated to the latest MT4 builds. You can drag the Alert level to any position on the indicator window. Tested as best I could with the Markets closed. {file} {image}
Many thanks! I've added this to my charts and checked it out, works well, better than I expected with the alert level able to be dragged into position, saves me a lot of typing numbers. It's greatly appreciated, thank you.
  • #17,091
  • Jan 2, 2017 5:48am Jan 2, 2017 5:48am
Quoting Sssno1
HELLO LGHR, CJA and other coders. Please I need little help to achieve what I want to test. I have been trying for many days. Your help will be appreciated. Attached is the code of an EA of my idea. EA has 3 Configurations, Configuration1, Configuration2, Configuration3. I have problem in Configuration2, details are as follows: 1. I open manual order BUY OE SELL depends on me. 2. THE EA afterwards takes over completely. 3. Place series of Buy stops and sell stops if Buy opened a sell stop if sell opened a buy stop with inputs for spacing, accomodation...
Sorry! my English is poor, and your description is a little longer, my understanding for that is not enough.
  • #17,092
  • Jan 2, 2017 6:09am Jan 2, 2017 6:09am
Quoting LuizSchiavi
{quote} Hello, Could you explain more how you use this indicator? Pair? TimeFrame?
I use it on any pair and any timeframe at the moment.

I need the alert notification to check the indicator further. Can you help?
  • #17,093
  • Jan 2, 2017 7:13am Jan 2, 2017 7:13am
Hello coders,

im looking for someone who can help me with an extra function in two indicators I use for scalping. Im using a pinbar detector and a engulfing bar alert, those indicators are not mine.. I did download them somewhere on this forum I guess. Both indicators send an alert if there is a pinbar/engulfing bar and then I decide if there is a reason to sell/buy. For this decision im looking to the MA-indicator(period 200, shift; 0, simple, close) and trendlines that I draw by myself.

What im asking for is an extra filter for the pinbar/engulfing bar alert. This are the conditions im always looking for: (1)I only want bullish pinbar/engulfing signals if the MA(200) is below the current price, (2)I only want bearish pinbar/engulfing signals if the MA(200) is above the current price. Is it possible to add the MA(200)in the settings so I only get the right alerts?

I really hope someone could help me with this. I will attach the indicators and my settings for the pinbar indicator in this message, for the engulfing bar im using the standard settings. I also attach two screenshots to show which alerts im interested in and which alerts im not interested in.

Settings pinbar indicator:
Count bars; 0
use alert; true
use emailalerts; false
use custom settings; true
custommaxnosebody.. ; 0.8
customnosebody..; 0.4
custom left eye opposit; true
custom nose samedirection; true
custom nose body inside.. ; false
custom left eye min body size; 0.6
custom nose protuding; 0.5
customnosebody to left eye body; 1.0
custom nose length to left eye; 0.0
custom left eye depth; 0.1

Thank you in advance, let me know if you can help me
Attached Image(s) (click to enlarge)
Click to Enlarge Name: bear market.jpg Size: 304 KB
Click to Enlarge Name: bull market.jpg Size: 306 KB
Attached File(s)
File Type: mq4 PinbarDetector.mq4   10 KB | 473 downloads
File Type: mq4 Engulfing Bar Alert 2.mq4   8 KB | 513 downloads
  • #17,094
  • Jan 2, 2017 7:53am Jan 2, 2017 7:53am
Quoting trend23
Hello coders, im looking for someone who can help me with an extra function in two indicators I use for scalping. Im using a pinbar detector and a engulfing bar alert, those indicators are not mine.. I did download them somewhere on this forum I guess. Both indicators send an alert if there is a pinbar/engulfing bar and then I decide if there is a reason to sell/buy. For this decision im looking to the MA-indicator(period 200, shift; 0, simple, close) and trendlines that I draw by myself. What im asking for is an extra filter for the pinbar/engulfing...
test it. first disable it's alert of PinbarDetector.mq4 and Engulfing Bar Alert 2.mq4 .
Attached File(s)
File Type: ex4 ! Alert.ex4   7 KB | 373 downloads
  • #17,095
  • Jan 2, 2017 8:29am Jan 2, 2017 8:29am
Quoting maximumguita
maybe someone is willing to do me a favor. I like to test a Strategy and need an Indicator or EA for this. The Idea is as follows: 1. we have an Engulfing Bar 2. the next bar has to be an Inside Bar. I would like to have an Alert and an Arrow shown in the chart by the breakout of the Inside Bar. If someone have fun to code an EA for Backtestings would it be great if the SL is the high/low of the Engulfing bar and the TP the end of the Breakout Bar regarding to the TF where the Signal accures. So at its best the Indy/EA is mtf and for example if...
maybe someone is willing to help me? Thank you in advance :-)
(.)(.) think first ...
  • #17,096
  • Jan 2, 2017 8:40am Jan 2, 2017 8:40am
Quoting lghr
{quote} test it. first disable it's alert of PinbarDetector.mq4 and Engulfing Bar Alert 2.mq4 . {file}
Thank you. Will test it tomorrow
  • #17,097
  • Jan 2, 2017 2:09pm Jan 2, 2017 2:09pm
Quoting lghr
{quote} Sorry! my English is poor, and your description is a little longer, my understanding for that is not enough.
LGHR, so how can I make you understand can you tell me please? ITS simple maths in the EA its not very hard description is long because the EA is long.

Awaiting your reply.

Please any other coder if you understand can you help me.

Thank you
  • #17,098
  • Jan 2, 2017 2:50pm Jan 2, 2017 2:50pm
Hey guys, is it possible to make an indicator which calculates the distance between close[i] and max movement in opposite direction of set_level(//this is price level above or below the close[i]) before reaching set_level.
I wonder how hard is it to do this because ,in my opinion, there must be temporary holding place for each candles distance ,while it doesn't have value.
if that's the case then it's much easier to calculate the data for older candle if it matches the criteria. //Just my thoughts .
What's your opinion ?
Know thyself
  • #17,099
  • Jan 2, 2017 6:44pm Jan 2, 2017 6:44pm
Quoting fxanalysis
Hey guys, is it possible to make an indicator which calculates the distance between close[i] and max movement in opposite direction of set_level(//this is price level above or below the close[i]) before reaching set_level. I wonder how hard is it to do this because ,in my opinion, there must be temporary holding place for each candles distance ,while it doesn't have value. if that's the case then it's much easier to calculate the data for older candle if it matches the criteria. //Just my thoughts . What's your opinion ?
Sounds a bit like indicators that use the open price of a candle as a starting point and the move either produces a positive or negative value depending where the current candle close is.
Trade what you see not what you hope
  • #17,100
  • Jan 2, 2017 6:54pm Jan 2, 2017 6:54pm
Quoting Ezios
{quote} the ea that you purchase is an .ex4 file because the prorammer does not want to let you see how he programmed it. the .ex4 file is not editable and you can not modify nothing in it because it is an executable file for the platform only. if your programmer gives to you the .mq4 file that is the uncompiled file then you can modify it and recompile it. when you compile it the result is the .ex4 file. you understood?

ok thank you sir..
195 traders viewing now