I will code your EAs and Indicators for no charge

Hello coder's, please i don't know if this is possible, this indicator already has alerts but i need it to alert anytime the arrows show up either on current candle or on closed candle. I don't want the alert to be limited to closed candle as it is now .

Thanks in advance.

Hi, can anyone tell me how to code a PAUSE for a number of seconds so that the sound alert does not alert on every tick

235 if (trend[whichBar] == -1) PlaySound("alert2.wav"); - is there a delay command that can be coded into this line? Something like 'delayfor 20sec' or something to that effect ?

Thank you.

Hi
To all great coder please... is it possible to add 78% level to this pivot point indicator please ?

Hi Gents

Could someone tell me if this is good tick data?

If find it odd that I have these large time "holes" (see 2nd to 3rd line for example), but maybe it is because it is in the morning? This is supposedly UTC.

2003.05.07 00:00:05.213,1.14218,1.14234,41.50,11.70
2003.05.07 00:00:05.555,1.14224,1.1424,10.70,4.00
2003.05.07 00:00:13.762,1.14216,1.14236,33.90,44.70
2003.05.07 00:00:14.097,1.14222,1.14232,25.30,54.30
2003.05.07 00:00:14.104,1.14225,1.14245,48.70,29.50
2003.05.07 00:00:14.439,1.14231,1.14241,36.70,18.80
2003.05.07 00:00:29.213,1.14219,1.14234,6.30,54.30
2003.05.07 00:00:29.555,1.14229,1.14244,34.30,10.40
2003.05.07 00:00:31.364,1.14219,1.14239,44.00,16.00
2003.05.07 00:00:31.706,1.14228,1.14248,9.80,28.70
2003.05.07 00:00:46.284,1.14223,1.14238,12.40,25.50
2003.05.07 00:00:46.626,1.14232,1.14247,15.20,24.00
2003.05.07 00:00:49.557,1.14225,1.1424,33.90,71.90
2003.05.07 00:00:49.899,1.14233,1.14248,36.70,22.00
2003.05.07 00:00:54.866,1.14232,1.14238,39.60,94.80
2003.05.07 00:00:55.208,1.14237,1.14243,5.00,24.00
2003.05.07 00:01:01.910,1.14227,1.14243,28.70,7.60
2003.05.07 00:01:01.954,1.14235,1.14251,1.60,5.60
2003.05.07 00:01:07.607,1.14234,1.14239,36.70,11.70
2003.05.07 00:01:07.651,1.14242,1.14247,28.70,21.30
2003.05.07 00:01:07.706,1.14228,1.14248,15.20,41.50
2003.05.07 00:01:07.750,1.14236,1.14256,0.80,63.10
2003.05.07 00:01:09.046,1.14235,1.14245,20.10,31.50
2003.05.07 00:01:09.090,1.14242,1.14252,39.70,23.60
2003.05.07 00:01:09.862,1.14236,1.14246,85.20,54.30
2003.05.07 00:01:09.906,1.14243,1.14253,18.90,28.70
2003.05.07 00:01:16.246,1.14232,1.14252,13.10,0.90


Later on it looks pretty clean though:

2003.05.07 01:55:37.605,1.14179,1.14184,0.80,2.40
2003.05.07 01:55:38.393,1.14167,1.14172,6.40,4.00
2003.05.07 01:55:50.874,1.14176,1.1419,17.10,34.30
2003.05.07 01:55:51.662,1.14165,1.14179,32.70,40.70
2003.05.07 01:56:00.724,1.14183,1.14187,25.50,10.40
2003.05.07 01:56:01.405,1.14178,1.14182,21.20,4.00
2003.05.07 01:56:02.786,1.14176,1.14196,43.50,0.50
2003.05.07 01:56:03.467,1.14167,1.14187,13.90,50.00
2003.05.07 01:56:16.918,1.14172,1.14202,4.80,66.10
2003.05.07 01:56:17.599,1.14163,1.14193,118.80,4.00
2003.05.07 01:56:19.035,1.14183,1.14193,28.70,29.80
2003.05.07 01:56:19.716,1.14178,1.14188,8.00,47.90
2003.05.07 01:56:23.542,1.14179,1.14199,21.50,24.80
2003.05.07 01:56:24.178,1.14183,1.14198,34.70,4.00
2003.05.07 01:56:24.223,1.14174,1.14194,16.00,41.50
2003.05.07 01:56:24.859,1.14177,1.14192,5.60,15.90
2003.05.07 01:56:28.051,1.14187,1.14191,24.10,38.30
2003.05.07 01:56:28.732,1.14182,1.14186,19.90,27.20
2003.05.07 01:56:50.771,1.14173,1.14193,0.80,47.90
2003.05.07 01:56:57.052,1.14188,1.14193,31.10,12.80
2003.05.07 01:56:57.733,1.14181,1.14185,8.00,0.70
2003.05.07 01:56:59.513,1.14182,1.14202,28.80,25.50
2003.05.07 01:57:00.639,1.1418,1.1419,45.60,38.70



Any opinions?

THAAAANK YOU!!!

Best
bg_sunny

Try the Sleep function.

I will not do it because this code is decompiled!

this is waste indicator... it will plot arrow at 5 th candle late to current candle ...

Hey I'm basically trying to figure out how to create a simple strategy that uses Renko Bars and an EMA. How would I code that so that lets say after x bars after the Renko Bars pass the EMA it closes position and opens the opposite way. I'm new to mql4 but I know some C#. All the help I could get would be great!

Hey everyone!

I really need some help with this, backtested this manually on a software which plays historical charts but I want to turn it into an EA for trading purposes as well as testing with different parameters and variables, it is basically the Turtle Trend Following Method using Donchian Channel Breakouts. I follow the original rules almos tto the T, only with the addition of the 200ema as a directional filter.

It consists of 2 subsystems:

This system is formed by two sub-systems. System 1 uses a shorter time-frame based on 20-bar breakouts, while System 2 uses a longer time-frame based on 55-bar breakouts.


Entries

Open a long or short position if the price exceeds the high or the low price respectively of the past 20 periods (Donchian Channel 20).

If the previous 20-bar breakout resulted in a profitable trade this new breakout would be ignored. The previous breakout for this rule is considered the previous breakout shown in the chart, irrespective of its direction (long or short), or whether or not that trade was actually opened, or skipped because of this rule.

If a 20-bar breakout is ignored, you are at the risk of missing a big trend, if the price continues to move in the direction of the breakout, so this is where System 2 is useful. If the price exceeds the 55-bar high/low you open a long/short position respectively, in case you didn't open a trade at the 20-bar breakout. All 55-bar breakouts are taken, whether or not the previous one was a winner.

Exits

The system uses manual trailing stops, so a System 1 trade would be closed if the price moved against the position and exceeded the 10-bar low/high.
System 2 trades would be closed if the price went against the position and exceeded the 20-bar low/high.

Initial stop-loss

These exits can be very far away from the entry price, so the initial stop-loss is placed at 2 x ATR 20 for both systems. Example, if the ATR is 50 pips, then the initial stop-loss would be placed 100 pips from the entry price, and then manually updated once the 10 or 20-bar low/high is lower/higher than the initial stop.

Position sizing and money management
2% Risk based on account balance and stop loss

I have attached the indicator needed below, I really hope someone will help out with this!

Thanks a bunch guys.

Sorry Im a junior memeber and I cannot start a thread with this.

Do you know why this is happening in mql?

I normalize all this double to doubles to only 1 decimal and some numbers appear with more decimals why?

I use Normalizedoble(value,1)

http://screencast.com/t/IVUWE3n2

Its very intriging

Humm....

If i'm reading correctly, you're looking for an expert in order to trade the turtle style...
Look for turtle traders, chances are, the indic you're asking for already exists here on ff forum

Have a good day,

Dear Coders,

If anyone make an EA for the following condition .... Please help me ....

If my open trades closed (1 or more), pending orders (buy/sell stop) also need to be closed immediately.

If anybody help me it will grateful to me ....

Thank you guys ....

HI CJA

please add alarm on this indicator

regard

please can some one kindly help modify this Givonly_SnR_SnD_r2.mq4 ( 8 Kb) to calculate on every new candle not on every tick. so that it stop freezing my terminal
please i will of the be of the very greatfull if any one can help or direct me to where i can get already modify version that will not freez my terminal.
thanks
my mail
{ email address deleted by staff }

Does anyone know if there is a MACD crossover EA that trades off of this
movement?
Sorry for the kindergarden art. lol

Thanks!

hi can you convert this pine script in tradingview to mt4 indicator?


study(shorttitle="BOA", title="Binary Options Arrows", overlay=true)
// Inputs
E = input(1, minval=1, title="Expiry")
// Calculations
Bearish_harami = (close[1] > open[1] and open > close and open <= close[1] and open[1] <= close and open - close < close[1] - open[1] and open[5] < open)
Bullish_harami = (open[1] > close[1] and close > open and close <= open[1] and close[1] <= open and close - open < open[1] - close[1] and open[5] > open)
// Setups
CALL = Bullish_harami == 1
PUT = Bearish_harami == 1
ARROW = CALL - PUT
plotarrow(ARROW, colorup=lime, colordown=red, transp=0, minheight=10, maxheight=10)
// Results
WIN = (CALL[E]==1 and close[E]<close) or (PUT[E]==1 and close[E]>close)
LOSE = (CALL[E]==1 and close[E]>=close) or (PUT[E]==1 and close[E]<=close)
bgcolor(WIN==1 ? lime : LOSE==1 ? red : na, transp=70)






Thank you

forget it. you gonna lose your shirt.... trust me.

Hello, who has a good strategy? I have been at a loss, but also can not find a good way！cry……

start a thread and maybe we can discuss some things. I think in this thread is the Question off topic :-)

Please can someone set the error code in this EA
thanks Advance