I will code your EAs and Indicators for no charge | Page 814 | Crypto Craft

Options

Go to
Permalinks
Print Thread

Similar Threads

I will code your pivot EAs for no charge 28 replies

I will code your scalping EAs for no charge 163 replies

Oanda MT4 - Indicators and EAs not showing 2 replies

EAs and indicators relating to moutaki... 22 replies

InterbankFX has loaded its MT4 platform with custom EAs, indicators and scripts 1 reply

Attachments: I will code your EAs and Indicators for no charge
Exit Attachments

I will code your EAs and Indicators for no charge

  • #16,261
  • Nov 3, 2016 4:11pm Nov 3, 2016 4:11pm
Quoting ramzam
i want EA for this. when blue arrow appears take one lot buy and stoploss place at the arrow value upto the candle close. for next candle stoplose can be removed... the same for blue dot appearance ... too one lot buy and stoploss place for holding all lots at the dot value up to the candle close and for next candle stoploss can be removed .. when red arrow appears close all longs and enter one lot short and then place stoploss at arrow value. for next candle stoploss can be removed. same for red dot appearce also. suppose stoploss hit means exit...
Hi Ramzam,
I have recently started coding EAs and would be more than happy to code this EA for you free of cost. Let me know if you are interested.
  • #16,262
  • Nov 3, 2016 4:32pm Nov 3, 2016 4:32pm
Quoting jesing
{quote} Dear michaellobry, your requirements EA is done...!!! it's my 1st mt4 Coding...i hope you like it, INPUT LOT SIZE, TAKE PROFIT, STOP LOSS, ORDER GAP ( FOR BUYSTOP,SELLSTOP,BUYLIMIT & SELLLIMIT) with MAGIC NUMBER sorry i don't got your last SOUND ALARM, so its not complete bcoz i don't understand what you want, find Attached file, ENJOY, Best of Luck, HAPPY TRADING - jesing sumesara {file} {image}
and were is the sorse code ?????
  • #16,263
  • Nov 3, 2016 4:45pm Nov 3, 2016 4:45pm
Hello Members, can some help me adding email notification to this Indicator , and if posible pop and audible sound when arrow Buy or sell


//---- indicator settings
#property indicator_chart_window
#property indicator_buffers 4
#property indicator_color1 LightBlue
#property indicator_color2 Orange
#property indicator_width1 2
#property indicator_width2 2
#property indicator_color3 LightBlue
#property indicator_color4 Orange
#property indicator_width3 2
#property indicator_width4 2
//---- indicator parameters
extern int MA_Period =14;
extern int MA_Shift =0;
extern int MA_Method =3;
extern int Applied_Price=0;
extern double Deviation =0.2;
extern int UseSignal =0;
//---- indicator buffers
double UpBuffer[];
double DnBuffer[];
double UpSignal[];
double DnSignal[];
double smax[];
double smin[];
double trend[];
//----
int ExtCountedBars=0;
//+------------------------------------------------------------------+
//| Custom indicator initialization function |
//+------------------------------------------------------------------+
int init()
{
int draw_begin;
string short_name;
//---- drawing settings
IndicatorBuffers(7);
SetIndexStyle(0,DRAW_LINE);
SetIndexShift(0,MA_Shift);
SetIndexStyle(1,DRAW_LINE);
SetIndexShift(1,MA_Shift);
//
SetIndexStyle(2,DRAW_ARROW);
SetIndexShift(2,MA_Shift);
SetIndexArrow(2,233);
SetIndexStyle(3,DRAW_ARROW);
SetIndexShift(3,MA_Shift);
SetIndexArrow(3,234);
//
IndicatorDigits(MarketInfo(Symbol(),MODE_DIGITS));
if(MA_Period<2) MA_Period=14;
draw_begin=MA_Period-1;
//---- indicator short name
IndicatorShortName("Env("+MA_Period+")");
SetIndexLabel(0,"UpTrendEnv");
SetIndexLabel(1,"DnTrendEnv");
SetIndexLabel(2,"UpSignal");
SetIndexLabel(3,"DnSignal");
SetIndexDrawBegin(0,draw_begin);
SetIndexDrawBegin(1,draw_begin);
SetIndexDrawBegin(2,draw_begin);
SetIndexDrawBegin(3,draw_begin);
//---- indicator buffers mapping
SetIndexBuffer(0,UpBuffer);
SetIndexBuffer(1,DnBuffer);
SetIndexBuffer(2,UpSignal);
SetIndexBuffer(3,DnSignal);
SetIndexBuffer(4,smax);
SetIndexBuffer(5,smin);
SetIndexBuffer(6,trend);
if(Deviation<0.1) Deviation=0.1;
if(Deviation>100.0) Deviation=100.0;
//---- initialization done
return(0);
}
//+------------------------------------------------------------------+
//| Custom indicator iteration function |
//+------------------------------------------------------------------+
int start()
{
int limit;
if(Bars<=MA_Period) return(0);
ExtCountedBars=IndicatorCounted();
//---- check for possible errors
if (ExtCountedBars<0) return(-1);
//---- last counted bar will be recounted
if (ExtCountedBars>0) ExtCountedBars--;
limit=Bars-ExtCountedBars;
//---- EnvelopesM counted in the buffers
for(int i=limit; i>=0; i--)
{
smax[i]=(1+Deviation/100)*iMA(NULL,0,MA_Period,0,MA_Method,Applied_Price,i);
smin[i]=(1-Deviation/100)*iMA(NULL,0,MA_Period,0,MA_Method,Applied_Price,i);
trend[i]=trend[i+1];
if (Close[i]>smax[i+1]) trend[i]=1;
if (Close[i]<smin[i+1]) trend[i]=-1;
if(trend[i]>0)
{
if (smin[i]<smin[i+1]) smin[i]=smin[i+1];
UpBuffer[i]=smin[i];
if (UseSignal>0)
if (trend[i+1]<0) UpSignal[i]=Low[i]-0.5*iATR(NULL,0,MA_Period,i);
DnBuffer[i]=EMPTY_VALUE;
}
else
{
if(smax[i]>smax[i+1]) smax[i]=smax[i+1];
DnBuffer[i]=smax[i];
if (UseSignal>0)
if (trend[i+1]>0) DnSignal[i]=High[i]+0.5*iATR(NULL,0,MA_Period,i);
UpBuffer[i]=EMPTY_VALUE;
}
}
//---- done
return(0);
}
//+------------------------------------------------------------------+




Thanks in advance
  • #16,264
  • Nov 3, 2016 6:58pm Nov 3, 2016 6:58pm
Quoting mrafzal
Hello there, Please could you make a Bollinger Bands + RSI EA? I have been looking for one for ages but cannot find the right one. Basically what i want it to do is automatically Buy when the price touches (or closes) below the lower bollinger band + the OPPOSITE Candle Closes, AND the RSI is below a certain level with the Stop loss below the lowest of the 2 candles -10 pips. Opposite for Short orders. BUY ENTRY: Price touches the Lower Bollinger Band Opposite Candle Closes (eg:green candle) RSI is below the lower level (eg:20) STOP LOSS lowest...

Here is a screenshot of what I'm after, if any good soul can help I would be very grateful.

Thanks very much.
Attached Image (click to enlarge)
Click to Enlarge Name: Buy and Sell Entries.png Size: 178 KB
May Peace & Blessings Of The Almighty God Be Upon You.
  • #16,265
  • Edited Nov 4, 2016 3:32am Nov 3, 2016 7:06pm | Edited Nov 4, 2016 3:32am
Quoting cja
{quote} 2 color as requested and I have also added automatic Histogram resizing code. I have also added a 4 color option which you may find useful. Note : the xb4d indicator must be in your indicator folder for these MTF indicators to work. {file} {file} {file} {image}
I have updated the code for this MTF indicator as the colors did not display correctly when using the MTF mode.
My apologies for posting a decompiled file ( xb4d.mq4 which must be in your indicator folder for this MTF to work ) I did not realise that was the case when I coded the MTF version as I was using an iCustom code off another MTF indicator calling the same indicator so never opened the original indicator. I have removed the indicator so if you need it you will have to find it some where else.

Attachment
Attached File(s)
File Type: ex4 xb4d MTF 4color.ex4   21 KB | 602 downloads

Added count bars code to allow faster loading of the indicator by limiting the display history
Attached File(s)
File Type: ex4 xb4d MTF 4color v1.ex4   21 KB | 603 downloads

Attached Image (click to enlarge)
Click to Enlarge Name: mtf (2).png Size: 36 KB
Trade what you see not what you hope
  • #16,266
  • Nov 3, 2016 9:00pm Nov 3, 2016 9:00pm
Quoting ramzam
{quote} i didn't understand this suppression point bro. when it is turn 0 cross down it is not plotting red dot so i asked .... and can you please remove this suppression because many of the time negative territory area bring the price more down and positive territory area bring new highs... The signal is to candle extreme price. i don't want for candle close..
New version with two controls:
// Controls
extern ENUM_ON_OFF SameSideSuppression = OFF; // Turn suppression of Marks on the same side as indicator level on or off
extern ENUM_SIGNAL_BAR SignalBar = BAR_ZERO; // Calculate signal on ticks in Bar Zero or on last tick in Bar 1.
not sure if this is desirable or not - you might experiment with this "if" in or just letting the statements execute with every tick.
if ( firstBar > 0 ) // No need to calculate each quote, just calculate when there is another bar

This indicator developement should likely have been taken to it's own thread....
Attached File(s)
File Type: mq4 MACD_Dot v2.mq4   20 KB | 613 downloads
  • #16,267
  • Nov 3, 2016 9:30pm Nov 3, 2016 9:30pm
Quoting lukeb
{quote} New version with two controls: // Controls extern ENUM_ON_OFF SameSideSuppression = OFF; // Turn suppression of Marks on the same side as indicator level on or off extern ENUM_SIGNAL_BAR SignalBar = BAR_ZERO; // Calculate signal on ticks in Bar Zero or on last tick in Bar 1. not sure if this is desirable or not - you might experiment with this "if" in or just letting the statements execute with every tick. if ( firstBar > 0 ) // No need to calculate each quote, just calculate when there is another bar This indicator developement should likely...
perhaps you have not see my previous message requesting to add the indicator for the size of the DOT and Arrow to be editable to bigger or smaller size can you please add that along with oscillator hide and unhide the lines drawn from oscillator.
  • #16,268
  • Nov 3, 2016 9:36pm Nov 3, 2016 9:36pm
CJA,

i could do that small mod for you on the timeframes but you posted compiled code. where is the mq4 file.

Thanks,
Mary
  • #16,269
  • Nov 3, 2016 9:39pm Nov 3, 2016 9:39pm
Quoting harupit
{quote} Hi Ramzam, I have recently started coding EAs and would be more than happy to code this EA for you free of cost. Let me know if you are interested.
hi harupit,
really i am happy on seeing this and i wish too....
really if you are willing to help means ... i want this one help and EA for it. please check this post.
http://www.forexfactory.com/showthre...39#post9216439 here i ask one help to add lines .. once if this lines get with the following values.. one day i need to test ... and find the right percentage and generate idea for EA....
for this top and bottom set of 2 dotted lines
the price already showing as value 1 and value 2... so for that yellow line
yellow dot lines = value1 +( value 1 * (0.236) ) ---------topside
and value1 +( value 1 * (-0.236) ) ---------- bottom side

for red line
red dot lines = value2 + ( value 2 * (0.236) ) ---------topside
and value2 + ( value 2 * (-0.236) ) ---------- bottom side
the ratio 0.236 i gave for example.. i didn't check which percentage will be good... once get this mq4 file means then i will check..

for that Macd dot LukeB bro is doing help. so why many persons into one indicator.
Success is a Journey Not a Destination....... kind regards ramzam
  • #16,270
  • Nov 3, 2016 9:54pm Nov 3, 2016 9:54pm
Quoting maryfromco
CJA, i could do that small mod for you on the timeframes but you posted compiled code. where is the mq4 file. Thanks, Mary
No small mod needed, I have posted the corrected MTF code.
Trade what you see not what you hope
  • #16,271
  • Nov 3, 2016 10:37pm Nov 3, 2016 10:37pm
Quoting prku018
{quote} perhaps you have not see my previous message requesting to add the indicator for the size of the DOT and Arrow to be editable to bigger or smaller size can you please add that along with oscillator hide and unhide the lines drawn from oscillator.
Easy for you to look at the code and make the changes - maybe next version for me to do it. Going to sleep now.
  • #16,272
  • Nov 3, 2016 11:09pm Nov 3, 2016 11:09pm
Quoting lukeb
{quote} New version with two controls: // Controls extern ENUM_ON_OFF SameSideSuppression = OFF; // Turn suppression of Marks on the same side as indicator level on or off extern ENUM_SIGNAL_BAR SignalBar = BAR_ZERO; // Calculate signal on ticks in Bar Zero or on last tick in Bar 1. not sure if this is desirable or not - you might experiment with this "if" in or just letting the statements execute with every tick. if ( firstBar > 0 ) // No need to calculate each quote, just calculate when there is another bar This indicator developement should likely...
i am checking it bro and make tomorrow inform for this ....
only one help
when i zoom in in m30 chart then lines and label ok... but when i zoom out it is like 2nd pic. i don't know why it is ... some fixed length line shown in pic 1 is enough when ever zoom in or out or time frame change...

3rd pic 1 hr chart is perfect ... when it is zoomed in it is like in 4th pic
Attached Image(s) (click to enlarge)
Click to Enlarge Name: Screenshot1.png Size: 23 KB
Click to Enlarge Name: Screenshot2.png Size: 16 KB
Click to Enlarge Name: Screenshot3.png Size: 21 KB
Click to Enlarge Name: Screenshot4.png Size: 22 KB
Success is a Journey Not a Destination....... kind regards ramzam
  • #16,273
  • Nov 3, 2016 11:51pm Nov 3, 2016 11:51pm
Hi All

Is it possible to run 2 different EA on the same currency on the same platform ?
If yes how do it ? ......2 charts open each one running 1 EA ?
Each EA will open position at different time using different SL TP settings

Thanks in advance for your help

SB
trying to make everyday the best risk/reward decisions possible
  • #16,274
  • Nov 4, 2016 12:54am Nov 4, 2016 12:54am
Hello guys! Please, I need a rather simple 2 instruments, 2 indicators. First, an indicator that will put on my screen 2 colored lines for the high and low of the previous year, second, I need an indicator that will put lines as support and resistances but only if on each side of the high or low are 10 bars.

Thanks and all the best!
  • #16,275
  • Nov 4, 2016 1:00am Nov 4, 2016 1:00am
Quoting slowbrain
Hi All Is it possible to run 2 different EA on the same currency on the same platform ? If yes how do it ? ......2 charts open each one running 1 EA ? Each EA will open position at different time using different SL TP settings Thanks in advance for your help SB
Just make sure the EA's both have Magic numbers then make sure the Magic numbers are different.
Trade what you see not what you hope
  • #16,276
  • Nov 4, 2016 1:06am Nov 4, 2016 1:06am
Please can some fix the bug in the code? Looks not compatible with the new MT4 update.

Thanks in advance....
Attached File(s)
File Type: mq4 Pauls MACD EA checks re-entry and high TF (1).mq4   15 KB | 572 downloads
File Type: mq4 Pauls MACD EA checks re-entry and high TF.mq4   15 KB | 569 downloads
File Type: mq4 Pauls MACD EA checks reentey v2.mq4   14 KB | 553 downloads
Le$$ I$ More
  • #16,277
  • Nov 4, 2016 1:56am Nov 4, 2016 1:56am
Quoting cja
{quote} Just make sure the EA's both have Magic numbers then make sure the Magic numbers are different.

Cja

Thanks for your help
trying to make everyday the best risk/reward decisions possible
  • #16,278
  • Nov 4, 2016 3:52am Nov 4, 2016 3:52am
Hii experts
Can any expert please modify this grid indicator I will be very thankful..
Like..
Pivot point
Grid size 1
Grid size 1a,
Grid size 2
Grid size 2b.
am attaching files here..

Regards..
Attached File(s)
File Type: ex4 aMarkHorizontalsDN1.ex4   12 KB | 480 downloads
File Type: mq4 aMarkHorizontalsDN1.mq4   3 KB | 536 downloads
File Type: ex4 aMarkHorizontalsUP1.ex4   12 KB | 454 downloads
File Type: mq4 aMarkHorizontalsUP1.mq4   3 KB | 531 downloads
  • #16,279
  • Nov 4, 2016 3:58am Nov 4, 2016 3:58am
Hi,

2 quick questions. Not the right space I know, but the only space with traders who reply or will share their knowledge.

1. Who has had a favorable experience with a binary broker? Customer service, prompt pay out etc...

2. Which broker provides spot trading & binary trading as a service? Swap money between the two accounts perhaps?

Many thanks!
kevinfxtrader blogspot com; 50 PIPS Per Day
  • #16,280
  • Edited 10:02am Nov 4, 2016 7:48am | Edited 10:02am
Quoting kosmo
Dear Coders, If any of you is so kind, I'd like to request a simple EA to help me manage some of my trades. The logic is as follows: 1. Let's say I place a pending buy stop order on EURUSD @1.11500, 0.1 lot. 2. Immediately after this pending triggers, the EA places a pending sell stop order at x pips distance (user defined) from the open buy trade, with the lotsize x times larger (user defined lot multiplier) than the initial 0.1 trade. 3. The EA needs to repeat that cycle of placing opposite direction pending stop orders as soon as the latest placed...
Hello again Masters of code,

No reaction to my post from Wednesday so far. Surely it's not due to the lack of skill, so if any of you could please code this simple EA for me, I would be immensely grateful.

Thank you!!
mind over matter
172 traders viewing now, 2 are registered:
MwlRCT
,
Aleksandr78