I will code your EAs and Indicators for no charge | Page 719 | Crypto Craft

Options

Go to
Permalinks
Print Thread

Similar Threads

I will code your pivot EAs for no charge 28 replies

I will code your scalping EAs for no charge 163 replies

Oanda MT4 - Indicators and EAs not showing 2 replies

EAs and indicators relating to moutaki... 22 replies

InterbankFX has loaded its MT4 platform with custom EAs, indicators and scripts 1 reply

Attachments: I will code your EAs and Indicators for no charge
Exit Attachments

I will code your EAs and Indicators for no charge

  • #14,361
  • Jul 5, 2016 9:31pm Jul 5, 2016 9:31pm
Quoting Chau1985
{quote} Alrightie then, I finally am coming a little bit closer to where I want to be. This is the new code I have used //---- Close Open BUY and Pending BUY by Selected Symbols and Selected Profit of Open BUYS { double orderTP = OrderTakeProfit(); int Btotal2=OrdersTotal(); for(int iii=Btotal2-1; iii>=0; iii--) { if(OrderSelect(iii,SELECT_BY_POS,MODE_TRADES)==true) { if(OrderSymbol()==_Symbol&& OrderClosePrice()==orderTP) { if(OrderType()==OP_BUY ) { bool resultbuy = OrderClose(OrderTicket(),OrderLots(),OrderClosePrice(),3,Red); } if(OrderType()==OP_BUYSTOP)...
seems to me you are over complicating things.
not sure if this will work for you as i don't know what else your code does, but if you simply want to close all open and pending orders when one hits a TP, then why not base your logic on a count of the open/pending orders.
keep looping and look for a time when the order count decreases (assume its a result of one TP hit) and close everything that is currently still open
" check out The Traders Outpost "
  • #14,362
  • Jul 5, 2016 9:44pm Jul 5, 2016 9:44pm
Quoting ruckser
Hi everyone. I am learning the MQL Language hope there alot of programmer here might help me, I have this very simple EA I created for learning purpose so my problem is I wanted to implement martingale in this strategy where a trade is opened after three consecutive bear or bull, but I was not succeeded I am looking for help if anyone who is competent, below is the code. #property copyright "" #property link "" #property version "1.02" #property strict //--- input parameters input int TakeProfit=500; input int StopLoss=500;...
add a variable startLots = 1; // or whatever you want

if(OpenOrders == 0)
{
LotSize = startLots ;
}
else
{
LotSize = startLots * OpenOrders;
}

this will give you a sequence of order with lot sizes, 1, 1, 2, 4, 8, 16 etc

you already have a routine for counting the open orders, so all you need to do is multiply the open order count by the start lots
" check out The Traders Outpost "
  • #14,363
  • Jul 6, 2016 12:11am Jul 6, 2016 12:11am
Quoting jega2007
{quote} hi ramzam see this forum http://www.forexfactory.com/showthre...26#post6539426
i have seen.. there it is old mq4 need old compiler.. so i dropped this.. and mainly i want this for commodities and stocks and futures.. not for currencies... but thank you for this support
Success is a Journey Not a Destination....... kind regards ramzam
  • #14,364
  • Jul 6, 2016 12:59am Jul 6, 2016 12:59am
Quoting ruckser
Hi everyone. I am learning the MQL Language hope there alot of programmer here might help me, I have this very simple EA I created for learning purpose so my problem is I wanted to implement martingale in this strategy where a trade is opened after three consecutive bear or bull, but I was not succeeded I am looking for help if anyone who is competent, below is the code. #property copyright "" #property link "" #property version "1.02" #property strict //--- input parameters input int TakeProfit=500; input int StopLoss=500;...
lol are you using my strategy?
  • #14,365
  • Jul 6, 2016 1:38am Jul 6, 2016 1:38am
Quoting ramzam
can this past day / week lines can be deleted and current day / week line alone will be able to present/ {image} {file} {file}
dear redlinefred ji.. can you guide me what to do to get the lines for short lines... where to modify with objectray=false and back =false
Success is a Journey Not a Destination....... kind regards ramzam
  • #14,366
  • Jul 6, 2016 1:45am Jul 6, 2016 1:45am
Quoting cyber1
{quote} SeaTheStars- Try this. {file}
Hi, thx for your time and effort. But this does not seem to work either. The arrows still remain on the chart, only disappear if I refresh
  • #14,367
  • Edited 9:19am Jul 6, 2016 2:18am | Edited 9:19am
Quoting RedLineFred
{quote} seems to me you are over complicating things. not sure if this will work for you as i don't know what else your code does, but if you simply want to close all open and pending orders when one hits a TP, then why not base your logic on a count of the open/pending orders. keep looping and look for a time when the order count decreases (assume its a result of one TP hit) and close everything that is currently still open
Thanks for your reply. It does really make sense what you are saying. However, due to my limited programming skills at the moment I encounter the following problems/questions:

  1. I do not know how to compare current count with previous count. So if the current count for Sell is 3 and after one of the Sell hits TakeProft the count for Sell is 2. I would think to store them in some memory (arrays?) and then compare. Then OrderClose and OrderDelete all outstanding orders.
  2. All my OrderOpenTime for a "series" of buy/sell and pending orders are the same. So once the signal for opening the orders is issued it will open my buy/sell order and pending orders. So would it possible to select on Symbol and OpenOrderTime to close these Open and Pending Orders?
  3. I always heard that closed orders will fall in the History list, so if I want to look for the latest close order shouldn't I look into the History with Selectorder like:
    Inserted Code
    OrderSelect(i,SELECT_BY_POS,MODE_HISTORY)

    Sorry for any typo mistakes in the code as I am now in office while typing

I agree that I overcomplicate things a little bit too much, but at the moment I do not have the knowledge yet to judge what should be correct or incorrect

EDIT: I just edit the code a little bit and I am able to close the pending orders. Now to my next challenge which is close to open orders and pending orders based on their symbol and not Order Only. Anyway, thanks for the people who gave their time looking and commenting at my problem

  • #14,368
  • Jul 6, 2016 2:37am Jul 6, 2016 2:37am
hello , I want put SSI into the mt4,please help me. thank you very much. like this:
Attached Image (click to enlarge)
Click to Enlarge Name: ddddddddd.jpg Size: 73 KB
  • #14,369
  • Jul 6, 2016 4:35am Jul 6, 2016 4:35am
Quoting goathed1
hello cyber1, How difficult would it be to make an indicator like the one in the chart for MT4. Coloring the basing candles which are orange here. Body of candle is 50% or less of the total candle high to low. Thanks. {image}
Dear Goathed,
Were you able to get the indicator which you have mentioned above. If yes please can you share it I would be very thankful.
Wish you green pips.
Regards,
Mob.
  • #14,370
  • Jul 6, 2016 6:30am Jul 6, 2016 6:30am
HI everyone
Can someone help me make file ,ex4 for this EA please. thank you
Attached File(s)
File Type: mq4 Double CCI EA.mq4   61 KB | 516 downloads
  • #14,371
  • Edited 8:52am Jul 6, 2016 7:12am | Edited 8:52am
...
  • #14,372
  • Jul 6, 2016 7:54am Jul 6, 2016 7:54am
Quoting hanluc
HI everyone Can someone help me make file ,ex4 for this EA please. thank you {file}
mistake is too many, some is basic sign of operation.
Attached File(s)
File Type: ex4 Double CCI EA.ex4   101 KB | 409 downloads
  • #14,373
  • Jul 6, 2016 9:24am Jul 6, 2016 9:24am
Quoting cyber1
{quote} SeaTheStars- Try this. {file}
If you donīt mind you could either make the last arrow disappear once a counterarrow comes immediately afterwards or program it so that once an arrow is confirmed it after bar closed it does not remove itself from the chart.

Thx in advance
  • #14,374
  • Jul 6, 2016 9:46am Jul 6, 2016 9:46am
Quoting SeaTheStars
{quote} If you dont mind you could either make the last arrow disappear once a counterarrow comes immediately afterwards or program it so that once an arrow is confirmed it after bar closed it does not remove itself from the chart. Thx in advance
SeaTheStars-
It should work now.
Attached File(s)
File Type: mq4 ARROWS_mod.mq4   4 KB | 604 downloads
  • #14,375
  • Jul 6, 2016 10:04am Jul 6, 2016 10:04am
Quoting hanluc
HI everyone Can someone help me make file ,ex4 for this EA please. thank you {file}
hanluc-
Try this.
Attached File(s)
File Type: ex4 Double CCI EA.ex4   103 KB | 574 downloads
  • #14,376
  • Edited Jul 7, 2016 7:46am Jul 6, 2016 10:14am | Edited Jul 7, 2016 7:46am
i found this too........
//any one please ... i have downloaded smsupertrendMTF_v1.ex4 and used for some hrs... but inadvertantly i deleted... and now searching in net i couldn't able to find this...

if any one have this file and its mq4 means it would be great for me...

i got one idea on that but when i search in folder i didn't find this indicator.. please any of you hav this indicator or link please provide me... then also i will seek here only the help... because still i am small one in learning and coding ..
Success is a Journey Not a Destination....... kind regards ramzam
  • #14,377
  • Jul 6, 2016 10:22am Jul 6, 2016 10:22am
Can anyone fix the alerts on this ea it alerts every tick even if you check every tick to off​
Attached File(s)
File Type: mq4 EA 123 02.mq4   18 KB | 521 downloads
  • #14,378
  • Jul 6, 2016 10:24am Jul 6, 2016 10:24am
Quoting jc2181979
{quote} lol are you using my strategy?
He he he he he, You use strategy like this or it is yours?? Lol by the way I didn't take it from you sorry mate :-)
  • #14,379
  • Jul 6, 2016 10:39am Jul 6, 2016 10:39am
Quoting ramzam
any one please ... i have downloaded smsupertrendMTF_v1.ex4 and used for some hrs... but inadvertantly i deleted... and now searching in net i couldn't able to find this... if any one have this file and its mq4 means it would be great for me... i got one idea on that but when i search in folder i didn't find this indicator.. please any of you hav this indicator or link please provide me... then also i will seek here only the help... because still i am small one in learning and coding ..
Hi Ramzam, Indicator with the beginning sm are usually from the coder Swingman found here http://www.forexfactory.com/swingman . If you want the mq file, maybe you ask him.
Attached File(s)
File Type: ex4 smSuperTrend MTF_v1.ex4   10 KB | 535 downloads


Btw: your deleted indicator should be in the waste paper bin (is that the right word? Googletranslater) of your PC
(.)(.) think first ...
  • #14,380
  • Jul 6, 2016 11:17am Jul 6, 2016 11:17am
A very noob question. I always thought that trading in multiple pairs is just simply drag and drop to the Symbol Window and that's it. Now my EA is able to trade, but only with 1 pair of Symbol at the same time. Another Symbol will only trade when the other trade is closed. Now I don't have a code where it explicit says that there can only maximum one trade per symbol (I only have a count function corresponding its MagicNumber). What else could you think of that might block my EA to trade at multiple pairs?
189 traders viewing now, 6 are registered:
Skyrider60
,
aspiring91
,
BestTraderEv
,
ififils
,
,
Jeffo