I will code your EAs and Indicators for no charge | Page 715 | Crypto Craft

Options

Go to
Permalinks
Print Thread

Similar Threads

I will code your pivot EAs for no charge 28 replies

I will code your scalping EAs for no charge 163 replies

Oanda MT4 - Indicators and EAs not showing 2 replies

EAs and indicators relating to moutaki... 22 replies

InterbankFX has loaded its MT4 platform with custom EAs, indicators and scripts 1 reply

Attachments: I will code your EAs and Indicators for no charge
Exit Attachments

I will code your EAs and Indicators for no charge

  • #14,281
  • Jul 2, 2016 10:52am Jul 2, 2016 10:52am
Quoting 1389
{quote} Bro compile MQL file not ex4 u will find errors in it
(.)(.) think first ...
  • #14,282
  • Jul 2, 2016 11:03am Jul 2, 2016 11:03am
Hello All,
I have a general template of an EA that I use to test systems. At the moment I am testing a indicator "better volume indicator" and I am trying to use it in my EA. The problem is icustom is unable to read correctly from the indicator buffers. I have printed the values and it is passing nothing to expert advisor. To me it seems icustom is unable to read from array values from indicator(Please correct me here if I am wrong). Here is what I am doing:

From the Indicator MQL file. I get the buffers:
SetIndexBuffer(0,red);
SetIndexStyle(0,DRAW_HISTOGRAM,0,width2);
SetIndexLabel(0,"Climax High ");

SetIndexBuffer(4,white);
SetIndexStyle(4,DRAW_HISTOGRAM,0,width2);
SetIndexLabel(4,"Climax Low ");

In my EA: I use:
double up = iCustom(Symbol(), Period(), "vol", 0, 1);
double down = iCustom(Symbol(), Period(), "vol", 4, 1);

Now when there is climax high/low volume, indicator shows it as a positive number (indicator pic attached).
Buy/sell conditions in my EA is also given below:
if(up > 0 && BuyTicket == 0) { OrderSelect(SellTicket,SELECT_BY_TICKET)

I have also attached the indicator mql file and also expert advisor. If anyone can have a look at it, I would be extremely thankful.
Thanks
Attached Image
Attached File(s)
File Type: mq4 vol_EA.mq4   4 KB | 500 downloads
File Type: mq4 vol2.mq4   5 KB | 496 downloads
  • #14,283
  • Jul 2, 2016 11:50am Jul 2, 2016 11:50am
Quoting Robert52
I had a similar problem and reset the input level and save the file with different file name and that cleared the problem you may want to try it to limit the number of buy and sells just a thought Robert
It still the same .It will start with open 3 pending buy and 3 pending sell.
  • #14,284
  • Jul 2, 2016 12:17pm Jul 2, 2016 12:17pm
Hello All,
Regarding my previous question, I have printed values returned by icustom and they are empty values (2147483647). Why icustom is unable to read the value from the indicator ?
can anyone please help me with this ? I have tried almost everything I could find in the documentation and online.
Thanks
  • #14,285
  • Jul 2, 2016 3:30pm Jul 2, 2016 3:30pm
Quoting cja
{quote} Untested as the Markets are closed. {file} {image}
Hi CJ please can you help to look at this ross hook indicator the alert is not working
Attached File(s)
File Type: mq4 Ross Hook_show123v2 Alerts.mq4   60 KB | 583 downloads
File Type: ex4 Ross Hook_show123v2 Alerts.ex4   26 KB | 490 downloads
  • #14,286
  • Jul 2, 2016 3:45pm Jul 2, 2016 3:45pm
A quick question is there a time ratio indicator for mt4 that anyone is willing to share that can be used over or in multiple time frames?

Robert
Just wish I could code
  • #14,287
  • Jul 2, 2016 5:33pm Jul 2, 2016 5:33pm
Quoting saleho
{quote} try this {file}
Many many thanks for your help.
Say something meaningful or Silence!!
  • #14,288
  • Jul 2, 2016 6:21pm Jul 2, 2016 6:21pm
wow great... thank you so much...

Quoting maximumguita
{quote} cant help you with your request but here is the mq file. Check if there are both the same {file}
Success is a Journey Not a Destination....... kind regards ramzam
  • #14,289
  • Jul 2, 2016 8:20pm Jul 2, 2016 8:20pm
Quoting Slingshots1
{quote} Hi CJ please can you help to look at this ross hook indicator the alert is not working {file} {file}
//+------------------------------------------------------------------+
//| Ross Hook_show123v2 Alerts.mq4 |
//| mod. one of show123.mq4 |
//| Copyright 2006, Computer Objectives Designed & Evolved |
//| Version 1.0 |
//|Supplied as Freeware. Code can be replicated and used as desired |
//| Built on and for Meta Trader version 4 |
//| No responsibility taken for ANY trade decision made using this |
//| software. No responsibility taken for ANY side effects |
//| where this software is used. |
//| |
//| mod. fxdaytrader 2014 (Alerts), http://ForexBaron.net |
//+------------------------------------------------------------------+
//DOWNLOAD this version (and a manual) at http://www.forexfactory.com/showthre...12#post7405112
// this alert version is based upon the indicator "show123v2.mq4" found at http://www.forexfactory.com/showthre...17#post4771717
// !!! IMPORTANT: !!! if this mql4 file does not compile with the mt4 build 600+ use the build 509 compiler/editor at http://www.forexfactory.com/attachme...6&d=1397124670 (thread: http://www.forexfactory.com/showthread.php?t=470340 )
  • #14,290
  • Jul 2, 2016 8:30pm Jul 2, 2016 8:30pm
Quoting flynn91
{quote} It will auto set 3 buy pending order and 3 selling order even though it is set as level as 1.U can try on strategy tester.Hope someone can help me to fix the problem.
I tried it using the tester and it worked exactly the way it should, I put in LEVELS = 1 and it set one level above / below the entry price. So I suspect it is something you are doing that is the problem.

1/ Are you changing the LEVELS value in the Expert Properties tab of the tester or in the MetaEditor?

2/ If you change any values using the MetaEditor you need to open the Expert Properties tab on the tester and click on reset for the code to update otherwise the old settings remain in place.

3/ If all else fails find a thread on this Forum that goes into how to use the MT4 tester.

LEVELS = 1;
Attached Image (click to enlarge)
Click to Enlarge Name: LEVELS 1.png Size: 32 KB


LEVELS = 3;
Attached Image (click to enlarge)
Click to Enlarge Name: LEVELS 3.png Size: 34 KB
Trade what you see not what you hope
  • #14,291
  • Jul 3, 2016 12:42am Jul 3, 2016 12:42am
Quoting cja
{quote} I tried it using the tester and it worked exactly the way it should, I put in LEVELS = 1 and it set one level above / below the entry price. So I suspect it is something you are doing that is the problem. 1/ Are you changing the LEVELS value in the Expert Properties tab of the tester or in the MetaEditor? 2/ If you change any values using the MetaEditor you need to open the Expert Properties tab on the tester and click on reset for the code to update otherwise the old settings remain in place. 3/ If all else fails find a thread on this Forum...
Cja,The picture u shows are right.But u go to the results there.It initially will be three pending sell orders and three pending buy orders.Did u notice it?
  • #14,292
  • Jul 3, 2016 12:49am Jul 3, 2016 12:49am
Quoting cja
{quote} I tried it using the tester and it worked exactly the way it should, I put in LEVELS = 1 and it set one level above / below the entry price. So I suspect it is something you are doing that is the problem. 1/ Are you changing the LEVELS value in the Expert Properties tab of the tester or in the MetaEditor? 2/ If you change any values using the MetaEditor you need to open the Expert Properties tab on the tester and click on reset for the code to update otherwise the old settings remain in place. 3/ If all else fails find a thread on this Forum...
Indeed it will be one level but it will be three sell stop and three buy stop at the 1 level.
  • #14,293
  • Jul 3, 2016 1:39am Jul 3, 2016 1:39am
hi CJA kindly help recoding this indicator,its very heavy on charts,if l open two charts it freezes,please code for me.l would kindly request you put an alert when the two lines crosses,thank you have attached the indi.As l said it freezes my charts.thank you in advance
Attached File(s)
File Type: ex4 CCFp V4.1 ModOnePair.ex4   33 KB | 528 downloads
File Type: mq4 CCFp V4.1 ModOnePair.mq4   14 KB | 540 downloads
Watch me trade Live on YouTube
  • #14,294
  • Jul 3, 2016 1:53am Jul 3, 2016 1:53am
@Ighr,
I have already done that. That is too easy
I just made another copy of the indicator for uploading it. That is not the reason why iCustom is unable to read the values. If you would like to test it yourself.
vol.mq4 is the indicator (MQL4/indicators)
vpa.mq4 is the ea (MQL4/scripts)
IncludeExample.mqh(MQL4/include)

iCustom is still unable to read it correctly. I have asked it on other(MQL4) forums also and so far noone has been able to resolve it
Thanks.
Attached File(s)
File Type: mqh IncludeExample.mqh   22 KB | 438 downloads
File Type: mq4 vol.mq4   5 KB | 463 downloads
File Type: mq4 vpa.mq4   4 KB | 468 downloads
  • #14,295
  • Jul 3, 2016 3:17am Jul 3, 2016 3:17am
Do any body has the pip finite trend laser mt4 indicator
  • #14,296
  • Jul 3, 2016 4:27am Jul 3, 2016 4:27am
Quoting pippimp
Cja, Thank you so much for your help!! I will test the indicator and report back. Kingmicro - That is a 10 simple moving average applied to Median Price (HL/2) with levels of -400,-200,200,400. Its the same MT4 moving average indicator that comes standard with MT4 platform.. Hope that helps. Thanks to the this great forum community as well! Pippimp
hi,,, do you have indicator that user666 have created for prediction?
  • #14,297
  • Jul 3, 2016 4:55am Jul 3, 2016 4:55am
small help please ......... in this indicator labels are not deleting when i detach the indicator... i tried but failed... any one please
Attached File(s)
File Type: mq4 FiboPiv_Daily_DK.mq4   13 KB | 508 downloads
Success is a Journey Not a Destination....... kind regards ramzam
  • #14,298
  • Jul 3, 2016 1:59pm Jul 3, 2016 1:59pm
Quoting sunnym
hi CJA kindly help recoding this indicator,its very heavy on charts,if l open two charts it freezes,please code for me.l would kindly request you put an alert when the two lines crosses,thank you have attached the indi.As l said it freezes my charts.thank you in advance {file} {file}
hi CJ kindly help please
Watch me trade Live on YouTube
  • #14,299
  • Edited Jul 9, 2016 7:31am Jul 3, 2016 3:45pm | Edited Jul 9, 2016 7:31am
{ sensitive information deleted by staff, per request }
  • #14,300
  • Jul 3, 2016 8:32pm Jul 3, 2016 8:32pm
Quoting shaaquille
@Ighr, I have already done that. That is too easy I just made another copy of the indicator for uploading it. That is not the reason why iCustom is unable to read the values. If you would like to test it yourself. vol.mq4 is the indicator (MQL4/indicators) vpa.mq4 is the ea (MQL4/scripts) IncludeExample.mqh(MQL4/include) iCustom is still unable to read it correctly. I have asked it on other(MQL4) forums also and so far noone has been able to resolve it Thanks. {file} {file} {file}
Your ea work normally!
Attached Image (click to enlarge)
Click to Enlarge Name: Screenshot3.png Size: 222 KB
173 traders viewing now