I will code your EAs and Indicators for no charge | Page 665 | Crypto Craft

Options

Go to
Permalinks
Print Thread

Similar Threads

I will code your pivot EAs for no charge 28 replies

I will code your scalping EAs for no charge 163 replies

Oanda MT4 - Indicators and EAs not showing 2 replies

EAs and indicators relating to moutaki... 22 replies

InterbankFX has loaded its MT4 platform with custom EAs, indicators and scripts 1 reply

Attachments: I will code your EAs and Indicators for no charge
Exit Attachments

I will code your EAs and Indicators for no charge

  • #13,281
  • May 10, 2016 9:41am May 10, 2016 9:41am
Hello Guys,

Does anyone here willing to help me to update/code on my EA.
I just want to add a few more trading conditions.

Thanks in advance
Twitter/FB : @scandicfx
  • #13,282
  • May 10, 2016 9:51am May 10, 2016 9:51am
Quoting cyber1
{quote} bipfx- Most times you can add an extra 0 to your SL and TP as Point values are not being calculated correctly. if SL is now 20 set to 200
Wow! It works! Thanks a lot Sir, cyber1. Now I will be able to modify as my wish.
  • #13,283
  • May 10, 2016 10:37am May 10, 2016 10:37am
Quoting prku018
{quote} with daily time frame too is it possible. i know starting of the week you must be busy with other works along with helping people on the forum. but is there any way you can edit or generate one of my requirement.
prku018-
Added Daily. Also added separate inputs for Mn, Wk and Daily for spacing of lines.
Attached File(s)
File Type: ex4 FXPT_SRHTF_v2.ex4   29 KB | 653 downloads
  • #13,284
  • May 10, 2016 12:00pm May 10, 2016 12:00pm
Hi,
this CCI indicator alerts when cci line touches 100 and -100 only when D1, H4 and H1 align.

So a highly interesting thing. Combined with Hlinealerts and trendlinealerts indicators should be a strategy.

But the arrows flipping around and do not appear where they should.

Is it possible to fix that and check the message alerts please, that would be nice.

Thanks and Regards

Attached File(s)
File Type: mq4 CCI NLS Alarm.mq4   7 KB | 555 downloads
  • #13,285
  • May 10, 2016 8:26pm May 10, 2016 8:26pm
Quoting cyber1
{quote} prku018- Added Daily. Also added separate inputs for Mn, Wk and Daily for spacing of lines. {file}
CYBER SIR

thank you so much you are being so kind in helping many of us. thank you so much again. and if possible please look into the trend line i attached and assist.

  • #13,286
  • Edited 8:43pm May 10, 2016 8:27pm | Edited 8:43pm
Quoting hishamzz
Could any kind soul please let me know on how to achieve the following in MQL4? (1) Accept more than one date value as an input (comma seperated) in the format YYYYMMDD. Eg :- 20150631,20150701,20150702. (2) Loop through that list of dates and compare each provided date to the current date (3) If the current date matches any of the date in the variable (list), set a boolean flag of Y to another variable. A simple code block having this functionality done in MQL4 would suffice Thanks loads in advance! Zz
This is an indicator with code showing this being done
Attached File(s)
File Type: mq4 StringLoader.mq4   9 KB | 621 downloads
  • #13,287
  • May 10, 2016 9:58pm May 10, 2016 9:58pm
Quoting cja
{quote} {file} {image}
Awesome!!
Simplicity is the ultimate sophistication - Leonardo da Vinci
  • #13,288
  • Edited May 12, 2016 12:43am May 11, 2016 1:12am | Edited May 12, 2016 12:43am
Quoting cyber1
{quote} prku018- Added Daily. Also added separate inputs for Mn, Wk and Daily for spacing of lines. {file}
CYBER SIR

Thanks again so much.

This is the trend line i found closest and have attached the images. please indicated the size of ARROW bigger and the remaining parameters to be same.
can you find some time to adjust this both but it should be view able with the same data on 4 hour time frame also.
Attached Image(s) (click to enlarge)
Click to Enlarge Name: 1.png Size: 58 KB
Click to Enlarge Name: 2.png Size: 53 KB
  • #13,289
  • May 11, 2016 8:04am May 11, 2016 8:04am
Quoting cyber1
{quote} wil1- try this. {file}
can you work this furthur out for me please

-Can you add text (like in the picture) before the line value, for instance upper and lower?
-Can you draw an extra channel with settings 30 period and also show the value and text in the right upper corner and also with an arrow alert when the candle hits the line?
-Can you make an alert that also sents a message to mail and/or push notification?
-Is also to make it possible to add a password of kind, that if i share it i can controle it also, for instance i give it to a friend but for some reason i don't want him be able to still use it so i can deside from distance he can no longer use it with my settings?
Attached Image (click to enlarge)
Click to Enlarge Name: wils2.png Size: 32 KB
Attached File(s)
File Type: mq4 Wil's.RLF.v1.mq4   5 KB | 601 downloads
  • #13,290
  • May 11, 2016 9:00am May 11, 2016 9:00am
is there a macd coloured indicator available that will draw a vertical line on the chart and alert when the macd crosses the zero line?
  • #13,291
  • May 11, 2016 9:38am May 11, 2016 9:38am
Quoting Trendzalore
Is it possible to have an indicator that will create a histogram just like MACD but instead of the moving averages typically used for MACD I would like to have the 2 moving averages be the tenkan sen and kijun sen lines (from ichimoku) which would be the basis for forming the histogram? In short I would like a MACD like a histogram which uses separation of tenken sen and kijun lines from ichimoku

Perhaps this request is too difficult?
  • #13,292
  • May 11, 2016 3:01pm May 11, 2016 3:01pm
Dear Coder,

I am looking for EA that sends 2 orders buy and sell at the same time at each candle close, any time frame.
settings:
lot
profit
stop loss
minimum distance between orders

Please if anyone could help me with that EA to code or maybe there is somewhere on net that would be much appreciate.

thanks a lot
Regards
  • #13,293
  • May 11, 2016 8:34pm May 11, 2016 8:34pm
MoveObject("Target1",OBJ_HLINE,Time[1],Target1,Time[1],Target1,Yellow,1,STYLE_DASH);
SetObjectText("Target1_txt","Target1 "+Target1,"Arial",7,Yellow);
MoveObject("Target1_txt",OBJ_TEXT,Time[25],Target1,Time[25],Target1,White);
MoveObject("Target2",OBJ_HLINE,Time[1],Target2,Time[1],Target2,LimeGreen,1,STYLE_DASH);
SetObjectText("Target2_txt","Target2 "+Target2,"Arial",7,LimeGreen);
MoveObject("Target2_txt",OBJ_TEXT,Time[25],Target2,Time[25],Target2,White);

in this the line is coming as line only not coming in dash style
what to do to get dash style and this line comes full length of the screen .. i want only after signal to right side till the signal valid time.... how come i change this to get like that short lines ... please any one code specialist help me
Success is a Journey Not a Destination....... kind regards ramzam
  • #13,294
  • May 12, 2016 12:32am May 12, 2016 12:32am
CYBER SIR

just require a small adjustment the size of the lines. need to change the size as my requirement can the size 1 - 5 be added please.

SHOULD BE VIEW ABLE ON THE 4 HOUR
Attached File(s)
File Type: ex4 TrueTL V1.01.ex4   32 KB | 512 downloads
  • #13,295
  • May 12, 2016 12:50am May 12, 2016 12:50am
Quoting prku018
{quote} CYBER SIR Thanks again so much. This is the trend line i found closest and have attached the images. please indicated the size of ARROW bigger and the remaining parameters to be same. can you find some time to adjust this both but it should be view able with the same data on 4 hour time frame also. {image} {image}
CYBER SIR

The size of ARROW NEEDS to be bigger and remaining parameters to be same. can you find some time to adjust this both but it should be view able with the same data on 4 hour time frame
  • #13,296
  • May 12, 2016 2:58am May 12, 2016 2:58am
Attached File(s)
File Type: mq4 RSI_Divergence_v2.mq4   12 KB | 513 downloads


This divergence indicator is from 2007 and it must be rusted.

Sometimes it shows hidden divergence, which is excellent for re- entries into the trend or at least market momentum,
and sometimes it doesn `t in exact the same situation. (second chart window)

Is it possible to make that old tool reliable and stable or should it fly to the junk yard in exchange to a
new, clean coded version ???

Couldn `t find one.

Regards
  • #13,297
  • May 12, 2016 5:02am May 12, 2016 5:02am
Hello,

I have a request for a simple modification to the default zigzag indicator. At least I think it is simple

I want the zigzag up and down lines (bearish/bullish) to be colored separatly. So the bearish lines red and the bullish lines green. If possible I would like to have the option added to choose the particular color.

The reason is I make extensive use of the zigzag indi to stucture the price action and now I use trendlines as an overlay and color them accordingly. Having it integrated in the zigzag indi would save me quite some effort and time and make me more effective.

If this can be done I would greatly appreciate it.

Thanks.
  • #13,298
  • May 12, 2016 6:48am May 12, 2016 6:48am
Quoting Trendzalore
{quote} Perhaps this request is too difficult?
is this what you are after????
Attached File(s)
File Type: ex4 MACD ichimoku nmc.ex4   11 KB | 630 downloads

Attached Image (click to enlarge)
Click to Enlarge Name: macd.png Size: 51 KB
Trade what you see not what you hope
  • #13,299
  • May 12, 2016 7:39am May 12, 2016 7:39am
Quoting cja
{quote} is this what you are after???? {file} {image}
Yes, thank you very much
  • #13,300
  • May 12, 2016 7:59am May 12, 2016 7:59am
I was just wondering if any one had come up with a EA for the stop and reverse line.
could anyone let me know
thank for your time.
79 traders viewing now, 1 is registered:
yako47