I will code your EAs and Indicators for no charge | Page 664 | Crypto Craft

Options

Go to
Permalinks
Print Thread

Similar Threads

I will code your pivot EAs for no charge 28 replies

I will code your scalping EAs for no charge 163 replies

Oanda MT4 - Indicators and EAs not showing 2 replies

EAs and indicators relating to moutaki... 22 replies

InterbankFX has loaded its MT4 platform with custom EAs, indicators and scripts 1 reply

Attachments: I will code your EAs and Indicators for no charge
Exit Attachments

I will code your EAs and Indicators for no charge

  • #13,261
  • May 8, 2016 10:37pm May 8, 2016 10:37pm
Is it possible to have an indicator that will create a histogram just like MACD but instead of the moving averages typically used for MACD I would like to have the 2 moving averages be the tenkan sen and kijun sen lines (from ichimoku) which would be the basis for forming the histogram?

In short I would like a MACD like a histogram which uses separation of tenken sen and kijun lines from ichimoku
  • #13,262
  • May 9, 2016 12:12am May 9, 2016 12:12am
Quoting cyber1
{quote} reykuizon- Unless those values are already being calculated and its a matter of repositioning the labels then I have no interest in modifying the indicator. Plus I see no value in it - maybe someone else would be willing to do it.
Ok. Thank you master!
  • #13,263
  • May 9, 2016 2:28am May 9, 2016 2:28am
Quoting lukeb
{quote} Here is source code to do everything specified (and more). http://www.forexfactory.com/showthre...19#post8706919 Turn off ordering (by clicking on the ordering text setting the properties), just use the buttons. Easy to strip down to just do what you specify.
Thanks For the help Sir , i will have a look if it works as i described .
  • #13,264
  • May 9, 2016 3:16am May 9, 2016 3:16am
Could any kind soul please let me know on how to achieve the following in MQL4?

(1) Accept more than one date value as an input (comma seperated) in the format YYYYMMDD. Eg :- 20150631,20150701,20150702.
(2) Loop through that list of dates and compare each provided date to the current date
(3) If the current date matches any of the date in the variable (list), set a boolean flag of Y to another variable.

A simple code block having this functionality done in MQL4 would suffice

Thanks loads in advance!
Zz
  • #13,265
  • May 9, 2016 10:16am May 9, 2016 10:16am
Good day to all

I would like to know if the following could be made into an expert advisor with the following requirement prior to setting a buy stop and a sell stop pending order.

1) Using the market profile from say Previous day and today till the point of London open
2) Drawing trend lines for high of value area previous day to value area of low of today and from low value area of previous day to high of value area today
3) Placing a horizontal line at the intersection of the two trend lines to obtain the price at the intersection
4) Using value obtain at the intersection to place our buy stop / sell stop value
5) if price after London open < price obtained then buy stop place if close of bar crosses above price obtained
6) if price after London open > price obtained then sell stop placed if close of bar crosses below price obtained

see attached picture

Use this indicator for market profile see attached
Attached Image (click to enlarge)
Click to Enlarge Name: market profile request.jpg Size: 528 KB
Attached File(s)
File Type: mq4 MarketProfile.mq4   17 KB | 555 downloads
Just wish I could code
  • #13,266
  • May 9, 2016 10:20am May 9, 2016 10:20am
Hi guys,

I got two old indicators which don`t work at the same time on my charts.

I can only use one of them at a time, but it would be very good to have them both.

Cyber, could you please have a look at the coding, maybe it is just a little thing to change, that would be nice.

Message alerts will be ok, but the text should be updated like what TF, which line is touched or broken. And what else should be better.

Thank you.
Attached File(s)
File Type: mq4 HLine Alert.mq4   2 KB | 592 downloads
File Type: mq4 Trend Line Alert.mq4   2 KB | 584 downloads
  • #13,267
  • May 9, 2016 12:28pm May 9, 2016 12:28pm
Could some kind soul just make this indicator refresh every tick?

Right now every few hours I have to refresh the indicator, and it gets very hard for my old eyes. Can someone help me please. very thankful for you guys.
Attached File(s)
File Type: mq4 ISR.mq4   10 KB | 714 downloads
  • #13,268
  • May 10, 2016 12:24am May 10, 2016 12:24am
Quoting prku018
{quote} CYBER SIR. You are right about it. this is what i got the closest. Problem 1. It doesn't track from the beginning of the chart. Problem 2. I wanted it for the monthly, weekly time frame only "to be tracked on 4 hour time frame" Problem 3. Once i change the TF the lines do change accordingly. Please look into it if possible as i only need the lines marked on monthly, weekly time frames to remain the same but should be view able on 4 hour TF. and editable for the colors and size of the lines drawn {file}
with daily time frame too is it possible. i know starting of the week you must be busy with other works along with helping people on the forum. but is there any way you can edit or generate one of my requirement.
  • #13,269
  • May 10, 2016 12:30am May 10, 2016 12:30am
hi can you make ea with following condition

if daily candle stop making new high/or low and the candle should not be harami, then open a trade if market goes 10 pips above open stop 30 pips and carry on opening trade in direction of momentum just like reverse Martingale, but lots wont be double every time, stop of every new deal will be 30 pips and if price move 30 pips against all trade will be closed. Is it possible to make such an ea
  • #13,270
  • May 10, 2016 2:11am May 10, 2016 2:11am
extern double StopLoss = 20;
extern double TakeProfit = 30;
extern double LotSize = 0.10;
//extern double TrailingStop = 30;
int start()
{
double Five_min_MACD_Main;
double Five_min_MACD_Signal;

double Five_min_ADX_PlusDi;
double Five_min_ADX_MinusDi;
double Five_min_ADX;


int ticket, total;
if(Bars<100)
{
Print("bars less than 100");
return(0);
}
if(TakeProfit<10)
{
Print("TakeProfit less than 10");
return(0); // check TakeProfit
}
//For 5 Mins variables Calculation
Five_min_MACD_Main=iMACD(NULL, 5, 12, 26, 9, PRICE_CLOSE, MODE_MAIN, 0);
Five_min_MACD_Signal=iMACD(NULL, 5, 12, 26, 9, PRICE_CLOSE, MODE_SIGNAL, 0);
Five_min_ADX=iADX(NULL, 5, 14, PRICE_CLOSE, MODE_MAIN, 0);
Five_min_ADX_PlusDi=iADX(NULL, 5, 14, PRICE_CLOSE, MODE_PLUSDI, 0);
Five_min_ADX_MinusDi=iADX(NULL, 5, 14, PRICE_CLOSE, MODE_MINUSDI, 0);


total=OrdersTotal();
if(total<1)
{
// no opened orders identified
if(AccountFreeMargin()<(1000*LotSize))
{
Print("You have not enough money. Free Margin = ", AccountFreeMargin());
return(0);
}
// check for long position (BUY) possibility
if(Five_min_MACD_Main>=Five_min_MACD_Signal && Five_min_ADX_PlusDi>=Five_min_ADX_MinusDi && Five_min_ADX>=20)
{
ticket=OrderSend(Symbol(),OP_BUY,LotSize,Ask,3,Ask-StopLoss*Point,Ask+TakeProfit*Point,"Bipu Trade",997528,0,Green);
if(ticket>0)
{
if(OrderSelect(ticket,SELECT_BY_TICKET,MODE_TRADES)) Print("BUY order opened : ",OrderOpenPrice());
}
else Print("Error opening BUY order : ",GetLastError());
return(0);
}


// check for short position (SELL) possibility
if(Five_min_MACD_Main>=Five_min_MACD_Signal && Five_min_ADX_PlusDi<=Five_min_ADX_MinusDi && Five_min_ADX>=20)
{
ticket=OrderSend(Symbol(),OP_SELL,LotSize,Bid,3,Bid+StopLoss*Point,Bid-TakeProfit*Point,"Bipu Trade",997528,0,Red);
if(ticket>0)
{
if(OrderSelect(ticket,SELECT_BY_TICKET,MODE_TRADES)) Print("SELL order opened : ",OrderOpenPrice());
}
else Print("Error opening SELL order : ",GetLastError());
return(0);
}
return(0);
}

return(0);
}





Please help me as the EA doesn't work. Thanks in advance
Attached File(s)
File Type: mq4 MACD ADX EA.mq4   3 KB | 610 downloads
  • #13,271
  • May 10, 2016 4:25am May 10, 2016 4:25am
Quoting bipfx37
extern double StopLoss = 20; extern double TakeProfit = 30; extern double LotSize = 0.10; //extern double TrailingStop = 30; int start() { double Five_min_MACD_Main; double Five_min_MACD_Signal; double Five_min_ADX_PlusDi; double Five_min_ADX_MinusDi; double Five_min_ADX; int ticket, total; if(Bars<100) { Print("bars less than 100"); return(0); } if(TakeProfit<10) { Print("TakeProfit less than 10"); return(0); // check TakeProfit } //For 5 Mins variables Calculation Five_min_MACD_Main=iMACD(NULL, 5, 12, 26, 9, PRICE_CLOSE, MODE_MAIN, 0); Five_min_MACD_Signal=iMACD(NULL,...
2016.05.10 17:23:04.437 2016.05.03 23:59 MACD ADX EA GBPUSD,M5: OrderSend error 130


The stoploss is too small, it must is more than spread.
  • #13,272
  • May 10, 2016 5:55am May 10, 2016 5:55am
Quoting wolf300
Hi guys, I got two old indicators which don`t work at the same time on my charts. I can only use one of them at a time, but it would be very good to have them both. Cyber, could you please have a look at the coding, maybe it is just a little thing to change, that would be nice. Message alerts will be ok, but the text should be updated like what TF, which line is touched or broken. And what else should be better. Thank you. {file} {file}
wolf300-
Keep in mind each object must have a unique name. In this case both are named "Line1" by default.
I have added the other information to the alerts.
Attached File(s)
File Type: mq4 Trend Line Alert.mq4   3 KB | 672 downloads
File Type: mq4 HLine Alert.mq4   2 KB | 645 downloads
  • #13,273
  • May 10, 2016 6:55am May 10, 2016 6:55am
Quoting kosmo
Hi Coders, The attached indicator is the standard Awesome Oscillator, with alerts and arrows on chart, but the only available options for the alerts/arrows are: 1. slope colour change, and 2. signal line cross. Could someone please add alerts/arrows for the zero line cross? Many thanks in advance. {file}
Hello again, Coders. No reaction to my post from Friday so far.

I know you're busy with much cooler projects, but is anyone here kind enough to make this little modification for me, please? Many thanks in advance.
mind over matter
  • #13,274
  • May 10, 2016 7:54am May 10, 2016 7:54am
Quoting kosmo
{quote} Hello again, Coders. No reaction to my post from Friday so far. I know you're busy with much cooler projects, but is anyone here kind enough to make this little modification for me, please? Many thanks in advance.
Attached File(s)
File Type: mq4 Awesome_Signal_zero_alerts+arrows.mq4   8 KB | 731 downloads

Attached Image (click to enlarge)
Click to Enlarge Name: awesome.png Size: 54 KB
Trade what you see not what you hope
  • #13,275
  • May 10, 2016 8:23am May 10, 2016 8:23am
I wanted to do a test with the indicator "NonLagMA_v5 slope mtf".
My request is that a developer change this indicator for the following:
The "NonLagMA_v5 slope mtf" shows only the color when we are in M30 for superior time that is, if we are in M30 shows how he is Nonlag in H1, H4, D1, etc ... I want the opposite if we are in D1, I want "NonLagMA_v5 slope mtf" show color in less time, for example:
We are in D1 and I want him to show me how is the M30.
I hope I have been able to explain what I want, and that some programmer to do it for me.
Thank you in advance,
JVBS

Attached File(s)
File Type: mq4 NonLagMA_v5 slope mtf.mq4   7 KB | 629 downloads
Work very hard until you get there (excuse my english)
  • #13,276
  • May 10, 2016 8:35am May 10, 2016 8:35am
Quoting KumoBreaker
hi guys , can someone write an EA for the indicator i attached with following strategy: 1)buy when filter is moving up 2)sell when filter is moving down ___________________________ filter settings : cutoff period 10 _________________ no stop loss or adding volume but close & reverse the position if signal in opposite direction happens i hope to test it in lower time frames like m15 or m30 p.s : if u can shift the filter one bar to the right it would be awesome {file}
any help ?
  • #13,277
  • May 10, 2016 8:47am May 10, 2016 8:47am
Quoting kosmo
{quote} Hello again, Coders. No reaction to my post from Friday so far. I know you're busy with much cooler projects, but is anyone here kind enough to make this little modification for me, please? Many thanks in advance.
ticket=OrderSend(Symbol(),OP_BUY,LotSize,Ask,3,Ask-StopLoss*Point,Ask+TakeProfit*Point,"Bipu Trade",997528,0,Green);
if(ticket>0)
{
if(OrderSelect(ticket,SELECT_BY_TICKET,MODE_TRADES)) Print("BUY order opened : ",OrderOpenPrice());
}
else Alert("Error opening BUY order : ",GetLastError());
return(0);

Please tell me if you can where is my error in StopLoss=20(predefined). It also don't give alert msg. Thanks
  • #13,278
  • May 10, 2016 8:55am May 10, 2016 8:55am
Quoting cja
{quote} {file} {image}
You're a Pro, Sir! Thank you very very much, CJA.
mind over matter
  • #13,279
  • May 10, 2016 9:15am May 10, 2016 9:15am
Quoting cyber1
{quote} wolf300- Keep in mind each object must have a unique name. In this case both are named "Line1" by default. I have added the other information to the alerts. {file} {file}
Ahh, didn `t know that. See, that`s what happens when you have no idea about how indis and coding works.

I can tell you, if I should learn how to, I would code an indi which alerts everytime the trend goes on, convergence, so to speak, no divergence, no overbought, just when to go on in trend (or momentum of the market). Should be easy to code one of the oscillators to tell "move on" when a trend-confirmation-candle closes. But anyway

Thank you very much cyber, very nice !!!
Regards
  • #13,280
  • May 10, 2016 9:28am May 10, 2016 9:28am
Quoting bipfx37
{quote} ticket=OrderSend(Symbol(),OP_BUY,LotSize,Ask,3,Ask-StopLoss*Point,Ask+TakeProfit*Point,"Bipu Trade",997528,0,Green); if(ticket>0) { if(OrderSelect(ticket,SELECT_BY_TICKET,MODE_TRADES)) Print("BUY order opened : ",OrderOpenPrice()); } else Alert("Error opening BUY order : ",GetLastError()); return(0); Please tell me if you can where is my error in StopLoss=20(predefined). It also don't give alert msg. Thanks
bipfx-
Most times you can add an extra 0 to your SL and TP as Point values are not being calculated correctly.
if SL is now 20 set to 200
85 traders viewing now, 1 is registered:
yako47