I will code your EAs and Indicators for no charge | Page 645 | Crypto Craft

Options

Go to
Permalinks
Print Thread

Similar Threads

I will code your pivot EAs for no charge 28 replies

I will code your scalping EAs for no charge 163 replies

Oanda MT4 - Indicators and EAs not showing 2 replies

EAs and indicators relating to moutaki... 22 replies

InterbankFX has loaded its MT4 platform with custom EAs, indicators and scripts 1 reply

Attachments: I will code your EAs and Indicators for no charge
Exit Attachments

I will code your EAs and Indicators for no charge

  • #12,881
  • Apr 18, 2016 1:44pm Apr 18, 2016 1:44pm
Vice versa with 2
  • #12,882
  • Apr 18, 2016 1:46pm Apr 18, 2016 1:46pm
Sorry its lghr.
  • #12,883
  • Apr 18, 2016 2:33pm Apr 18, 2016 2:33pm
Quoting lghr
{quote} Here you go. test it. {file}
Hi lghr
Thanks for your time, tested with a few hickups.. unfortunately the SL is not being placed on both buy and sell market orders. Also, can you add an option to prevent further trades being opened when TP is reached i.e 1 position only placed with limits (1 basket) or (as is does at moment) execute another position with limits when TP is reached. This gives option if the trend is in doubt that no further trades will be executed.
Hope this isnt too much of a problem to change.

Again, many thanks
D
By failing to prepare, you are preparing to fail - Benjamin Franklin
  • #12,884
  • Apr 18, 2016 6:18pm Apr 18, 2016 6:18pm
Quoting GoopFX
hi can anyone point me to EA or script where soon as my EA or my manual trade trades oopen in market. it automatically sets SL and TP # of pips I assigned. Some EA are good but don't have the SL n TP, so I want to use manual management of EA with this ..thanks
GoopFX-
I posted this a while back. Its an EA. Not thoroughly tested but should work.
Attached File(s)
File Type: ex4 FXPT_SetTPSL_v1.ex4   7 KB | 517 downloads
  • #12,885
  • Apr 18, 2016 6:19pm Apr 18, 2016 6:19pm
Quoting Idris.Brazil
{quote} Hello CYBER1, Tks! Attached chart with vertical lines in yellow that I put manually in the chart (the red ones were put by the programm automatically with great assertiveness and it means ADX lost strenght). I noticed that 100 percent of the lost strength signals are pointed out automatically by the programm... whereas the gained strength signals are not pointed out by the programm in the majority of the events. (yellow lines of the chart as example) What I need the most are the gained strenght signals with vertical lines working properly....
Idris.Brazil-
I have removed the Strength level conditions as well as some other minor coding changes. It should now work as you requested.
Attached File(s)
File Type: ex4 ADX Slope New_mod2.ex4   29 KB | 542 downloads
  • #12,886
  • Apr 18, 2016 6:29pm Apr 18, 2016 6:29pm
Quoting roughtrader
Would it be possible to code a dynamic CCI indicator? DCCI my idea for this is a self adaptic period CCI, with dynamic lines for the 100 and 200 levels floating on the price chart. to calculate the best period, it would use cycles, for example, if the last cycle was 25 bars, it would shift to 25 periods once a cycle is completed. a cycle would be completed when a high or a low of the old swing is violated. the floating levels could be calculated using 50% from the last swing, this would be the zero line. and then the 100 -100 is 50% of that half...
roughrider-
I don't know if this is what you're looking for but here is a thread on DZ CCI
https://www.forex-tsd.com/forum/excl...=Dynamic%20CCI
  • #12,887
  • Apr 18, 2016 6:50pm Apr 18, 2016 6:50pm
Quoting Downunder
{quote} Hi lghr Thanks for your time, tested with a few hickups.. unfortunately the SL is not being placed on both buy and sell market orders. Also, can you add an option to prevent further trades being opened when TP is reached i.e 1 position only placed with limits (1 basket) or (as is does at moment) execute another position with limits when TP is reached. This gives option if the trend is in doubt that no further trades will be executed. Hope this isnt too much of a problem to change. Again, many thanks D
modified.
Attached File(s)
File Type: ex4 Trade by 4Pends.ex4   11 KB | 472 downloads
  • #12,888
  • Apr 18, 2016 7:08pm Apr 18, 2016 7:08pm
1. Scans for weekend gaps. (to scan or not, it is depend on the indicator 'Trend Magic'.)
2. Logic is if price opened above the close price before the weekend SELL. Tp where the price closed at the last bar before the weekend that is 23:59 closure on mt4. (do not understand what you meant)
3. Option for trailing tp and sl.
4. Option for a hard stop loss.
5. Should scan all possible pairs. (You can open the all pair chart that you want to trade)
  • #12,889
  • Apr 18, 2016 8:56pm Apr 18, 2016 8:56pm
Quoting cyber1
{quote} roughrider- I don't know if this is what you're looking for but here is a thread on DZ CCI https://www.forex-tsd.com/forum/excl...=Dynamic%20CCI
Thanks, that is not the same
Bulls are stupid Animals!especially when Im short!
  • #12,890
  • Apr 18, 2016 9:31pm Apr 18, 2016 9:31pm
Hi,

I do not need an ea to trade but an indicator which auto draws a horizontal line of higher value for the most 2 recent swing highs.
Many thanks in advance.

Kind Regards.
  • #12,891
  • Apr 18, 2016 9:43pm Apr 18, 2016 9:43pm
Quoting Macau
Hi, I do not need an ea to trade but an indicator which auto draws a horizontal line of higher value for the most 2 recent swing highs. Many thanks in advance. Kind Regards.
Macau-
Check this thread - should be close. http://www.forexfactory.com/showthread.php?t=227961
  • #12,892
  • Apr 18, 2016 10:27pm Apr 18, 2016 10:27pm
cyber1, thanks for the link.
  • #12,893
  • Apr 18, 2016 11:20pm Apr 18, 2016 11:20pm
hi guys. can someone help me please ?

i HAVE AN INDICATOR DBB , I WANTED TO ADD SIMPLE MOVING AVERAGE 24 TO IT

AND GIVE ME AN ALERT WHEN DBB CROSSES UP/ DOWN THE SMA
Attached File(s)
File Type: mq4 DBB Alert 01.mq4   11 KB | 557 downloads
  • #12,894
  • Apr 18, 2016 11:21pm Apr 18, 2016 11:21pm
Quoting cyber1
{quote} Macau- Check this thread - should be close. http://www.forexfactory.com/showthread.php?t=227961
helo cyber1 can u kindly make this indicator alarm appear when candle closed only? it always appeared and make me headache
Attached File(s)
File Type: mq4 japan candlestic.mq4   17 KB | 505 downloads
  • #12,895
  • Apr 19, 2016 1:03am Apr 19, 2016 1:03am
Hi,
I want to pass an array from 1 indicator file to another indicator. Can somebody pls. guide on how to do it thru MQL code?
I use Globalvariable Get- Set for passing simple variables between indicators. But have no clue about passing arrays.

Thanks
Best regards,
  • #12,896
  • Apr 19, 2016 3:44am Apr 19, 2016 3:44am
Could anyone do this ea for me please?

OSMA and PSAR ea

Basically , standard OSMA and PSAR ,the rules are simple when OSMA is positive and PSAR up appears buy and vice versa, no stop loss and adjustable take profit.
If anyone could do this ,I will appreciate.

Many thanks
  • #12,897
  • Apr 19, 2016 6:43am Apr 19, 2016 6:43am
I am using a very simple strategy to pinpoint my entry on the shorter time frames when I have identified a trade on the H1 or H4.
It seems that the strategy can actually be used to scalp M1 or M5 if you could make an EA which I could then optimise.
EMA 10
EMA 125
EMA 110
QQE set at 5
(I colour the QQE lines red and green. red on top obviously means downward price movement)
Enter when the EMA 10 comes out of the channel formed by the 2 longer EMAs, provided that the QQE agrees ie. green line is above red line and above the 50 level for a long. Red above green and below 50 level for a short.

thanks very much
  • #12,898
  • Apr 19, 2016 9:19am Apr 19, 2016 9:19am
Hi Coders!

Is it possible to make an EA based on the attached indi (PZ Lopez Trend)?
It does not repaint!
Buy = Line turns blue at the close of candle. ("Value 5" turns to 1,0000)
Sell = Line turns red/tomato at the close of candle. ("Value 6" turns to 1,0000)
I only have the ex4 file (found in this forum), but I`ve read somewhere that you can make an EA with the use of "iCustom" function? True?
I tried that, but did not succeed.
Also need Stoploss & Trailing SL.

Edit: Disregard the darkblue line on the chart, sorry!
Regards,
Mash
Attached Image (click to enlarge)
Click to Enlarge Name: Lopez.JPG Size: 93 KB
Attached File(s)
File Type: ex4 PZLopezTrend.ex4   73 KB | 795 downloads
  • #12,899
  • Apr 19, 2016 9:26am Apr 19, 2016 9:26am
sorry, I should have said
exit when EMA 10 goes back inside channel of the 2 longer EMAs AND QQE lines cross
  • #12,900
  • Apr 19, 2016 9:43am Apr 19, 2016 9:43am
Anybody can code Indicator (Could be EA too)

Need ALARM and ERROR ON THE CHART Not on the Indicator window

TF 5M

Those Parameters could be Editable..

a.k.a ( extern int )

Sell Signal

Cross From BELOW

RSI=75
Stoch=75
CCI=120


=====================

Buy Signal

Cross From Above

RSI=25
STOCH=25
CCI=-100

Thank you.
146 traders viewing now, 1 is registered:
saoco111