I will code your EAs and Indicators for no charge | Page 468 | Crypto Craft

Options

Go to
Permalinks
Print Thread

Similar Threads

I will code your pivot EAs for no charge 28 replies

I will code your scalping EAs for no charge 163 replies

Oanda MT4 - Indicators and EAs not showing 2 replies

EAs and indicators relating to moutaki... 22 replies

InterbankFX has loaded its MT4 platform with custom EAs, indicators and scripts 1 reply

Attachments: I will code your EAs and Indicators for no charge
Exit Attachments

I will code your EAs and Indicators for no charge

  • #9,341
  • Sep 14, 2015 12:54pm Sep 14, 2015 12:54pm
Quoting newfie4x
Hi everyone, I am looking for a simple fibonaci indicator that starts at 5pm est(NY) and runs through to 4pm the following day and remains on the chart at the close of the day. Settings: 0, .5, 1.0, 1.75, 2.0, -.75, -2.0. 0 and 1 would be the high and low of 5 pm to midnight, with .5 a center line, and 2 lines outside 0 and 1(high and low) at .75 and 1. All lines then run to 4 pm. Not necessary to be able to adjust settings, color red, line type solid, line size 2. If able to adjust settings, ok. I would like the indicator to stay on the chart for...

http://www.forexfactory.com/showthread.php?t=424547
  • #9,342
  • Sep 14, 2015 1:12pm Sep 14, 2015 1:12pm
Quoting cja
{quote} Unfortunately that EA is decompiled code and I suspect you will struggle to find any programmers on this Forum who will help you.
Oh my God :\
  • #9,343
  • Sep 14, 2015 1:20pm Sep 14, 2015 1:20pm
Hi, could someone create this binary option EA by following rules:

Sell (expiry 5 minute)

Price (1 min candle) crosses first time outside all three bollinger bands (settings: 20,2;18,2 and 15,2).
Stochastic (10,3,3) both lines (signal and value) are overbought area (over 80)
RSI (14) is overbought(over 70)

Buy (expiry 5 minute)

Price (1 min candle) crosses first time outside all three bollinger bands (settings: 20,2;18,2 and 15,2).
Stochastic (10,3,3) both lines (signal and value) are oversold area(under 20)
RSI (14) is oversold (under 30).

The restrictions:
If 1 minute candle crosses all three bollinger bands but RSI or Stochastic are not oversold/overbought
you do not take a trade 4 minute after the breake. Also if price crosses bollinger bands for example
3 minute after first breake then time (do not trade after break 4 minute) will start the beggining
regardless of stochastic and rsi(they may overbought and oversold area).

MM
1st trade 10
2nd trade 32.20
3 trade 51.46
4 trade 51.46
After 4th lost stop trading

I hope that somebody can help me. I would be very crateful
  • #9,344
  • Sep 14, 2015 2:45pm Sep 14, 2015 2:45pm
Quoting PacPak
Please could any coder add FIBO (61.8 and 38.2) between the last three sections, on the lines of resistance and support when drawing the display. Thanks in advance, {image} {file} {file}

why? how would that benefit you in trading
  • #9,345
  • Sep 14, 2015 2:47pm Sep 14, 2015 2:47pm
Quoting vid3otube
Hi all, I'm looking for an indicator that show amount and line when price has moved up or down from previous legs high or low X amount of pips specified by user. i have created image using ps to understand, please let me know if this possible. image shown below {image}
Hi, much interested in your zigzag indi. could You share it? Tnk.
  • #9,346
  • Sep 14, 2015 3:09pm Sep 14, 2015 3:09pm
Quoting moursi
hi all can anybody remove some line from that indicator if any body can just remove MA,RSI,MOM,WPR,MACD,CCI and left ONLY SAR,OSMA AND ADX TY {image} {file} MERRY CHRISTMAS FOR EVERYONE AND HAPPY NEW YEAR
cja and other great coder is it possible to on of options to all indicator and add all major pair or just all major pair and only ma/ema and show arrow changable timeframe
Say something meaningful or Silence!!
  • #9,347
  • Sep 14, 2015 3:41pm Sep 14, 2015 3:41pm
Quoting dagoods
{quote} why? how would that benefit you in trading
Hello Dagoods. I think that knowing the points fibo retracement of the previous section, gives me the opportunity to look orders in the price. Now manually drawing the fibo of each section and usually in the 61.8 something happens,.... reversal, lateral, etc. Thank you very much for your interest
  • #9,348
  • Sep 14, 2015 4:49pm Sep 14, 2015 4:49pm
Heiken Ashi 5m
Hey guys,

I've been trying to trade this for a while, with mixed results due to speed of execution, or lack there of. It's purely scalping, and fairly raw scalping at that.
would it be possible to build an EA that opens on every new heiken ashi bar, with the ability to change how many ticks into that bar the order is placed?

what i'm basically doing is taking 1 or 2 pips every 5 to 15 minutes of each hour as salary. A safety net in case my manual trades don't go as expected.

inputs would include:
-max spread
-TP&SL
-Trailing stop
-ticks before open (to thin out room for error on higher tf's)
-Lot sizes
-trades per bar
-max open trades at any one time

I'd like to trade it on many TF's but mostly 5,15,30, and 1h.

I have also attempted it with a few of the EA free builder softwares but cannot get it right, as it will only go long and never short.

Please, if you have the time, give it a go. I'm sure i won't be the only one to benefit.

Regards
  • #9,349
  • Sep 14, 2015 5:44pm Sep 14, 2015 5:44pm
i just need an alert box message when it crosses 0 line when the candle has closed and gives details about which pair it is
and thank u so much
Attached File(s)
File Type: ex4 DoubleCCI-With_EMA.ex4   17 KB | 437 downloads
File Type: mq4 DoubleCCI-With_EMA.mq4   7 KB | 451 downloads
  • #9,350
  • Sep 14, 2015 7:39pm Sep 14, 2015 7:39pm
Quoting Imka
i just need an alert box message when it crosses 0 line when the candle has closed and gives details about which pair it is and thank u so much {file} {file}
The indicator already has an Alert built into it, turn it on in the inputs "Zero_cross_alert = true;"
Trade what you see not what you hope
  • #9,351
  • Sep 14, 2015 11:37pm Sep 14, 2015 11:37pm
Please is it possible to have a trailing pending order that can even work as a hedge, that is I place a Sell Stop and as the price moves a certain amount of pips, the Sell stop also moves and when the Sell stop is taken, a buy stop opens at the distance where the price starts to reverse.
  • #9,352
  • Sep 15, 2015 12:43am Sep 15, 2015 12:43am
Quoting romualdoc
{quote} Hi, much interested in your zigzag indi. could You share it? Tnk.
hi, this indicator is not coded yet, Picture shown in post is a Photoshop design, i need to find someone who like to code this. Sure i will share this with you if i found coder to do it.
  • #9,353
  • Sep 15, 2015 2:16am Sep 15, 2015 2:16am
Quoting vid3otube
{quote} hi, this indicator is not coded yet, Picture shown in post is a Photoshop design, i need to find someone who like to code this. Sure i will share this with you if i found coder to do it.
http://www.forexfactory.com/showthread.php?t=240156
  • #9,354
  • Sep 15, 2015 2:42am Sep 15, 2015 2:42am
Hey Lesso and all the other pro-coders,

could you please have a look at this indi again.

Arrows do not always appear when conditions are fulfilled. Especially not when price goes back into trend again, what would be the ideal setup.

I am sure it is just a little thing to change, to get ALL arrows.

To see what I mean (Strategy) you can check out the thread RSI & CCI system.

I am using rsi 5 set to close, crossing 50 level up or down and cci 10 set to close, crossing 0 level.

Attached File(s)
File Type: mq4 XxRSI+CCIxX.mq4   5 KB | 431 downloads
  • #9,355
  • Sep 15, 2015 6:28am Sep 15, 2015 6:28am
Quoting cja
{quote} The indicator already has an Alert built into it, turn it on in the inputs "Zero_cross_alert = true;"
Hi CJA

I beg you please to do something about this so frustrating ea! It is so unreliable. Strangely enough it works perfectly on the strategy tester but live is a different matter completely. I had it set up Monday evening Asian session on 7 charts. The set ema was hit 5 times on 5 different trading pairs. It opened only one trade! On 4 trading pairs where the ema was hit it never opened a trade.

I'm wondering if it's working on "every tick"? Maybe sometimes it's just not recognizing the ema envelope on the live chart? Maybe it's not got enough time to recognize that it's hit the ema envelope before price action moves out of the trigger zone? Sometimes if price action doesn't bang violently against the ema it just doesn't open a trade. I don't think it's got anything to do with the "previous candle" logic. It's just not always recognizing the trigger zone area on the live chart for some reason.

Thanks and Regards
Attached File(s)
File Type: ex4 Price_Bounce_Off_MA_vff.ex4   24 KB | 431 downloads
  • #9,356
  • Sep 15, 2015 7:15am Sep 15, 2015 7:15am
Quoting cja
{quote} The indicator already has an Alert built into it, turn it on in the inputs "Zero_cross_alert = true;"
i want alert box message not just alert
and thank u so much for your help
  • #9,357
  • Sep 15, 2015 7:22am Sep 15, 2015 7:22am
Quoting Imka
{quote} i want alert box message not just alert and thank u so much for your help
As far as I can tell without trying it this does have the Alert box message.

Alert(Symbol(), " M", Period(), " Trend & Entry CCI Have both crossed below zero");
Alert(Symbol(), " M", Period(), " Trend & Entry CCI Have both crossed above zero");
Trade what you see not what you hope
  • #9,358
  • Sep 15, 2015 7:52am Sep 15, 2015 7:52am
Quoting cja
{quote} As far as I can tell without trying it this does have the Alert box message. Alert(Symbol(), " M", Period(), " Trend & Entry CCI Have both crossed below zero"); Alert(Symbol(), " M", Period(), " Trend & Entry CCI Have both crossed above zero");
if there is , show me how to active it
best regards
  • #9,359
  • Sep 15, 2015 8:17am Sep 15, 2015 8:17am
Quoting Ramaparasu
{quote} http://www.forexfactory.com/showthread.php?t=240156
Thank you but have tried both indicators but they common zigzag indicator only showing price above the line. and cannot use minimum pip value to show.
Zigzags goes with HH, HL,LL,LH im looking for simple indicator based on only pip retrace value.
  • #9,360
  • Sep 15, 2015 8:41am Sep 15, 2015 8:41am
hi all
can someone tell me if there's an indicator to inform me when Net lots ( buy open - sell open) reach a décimal level.
for example: décimal input level=0.5
alert must be activate if Net lots=0.5 or Net lots=-0.5
thanks in advance
106 traders viewing now, 1 is registered:
BestTraderEv