I will code your EAs and Indicators for no charge | Page 446 | Crypto Craft

Options

Go to
Permalinks
Print Thread

Similar Threads

I will code your pivot EAs for no charge 28 replies

I will code your scalping EAs for no charge 163 replies

Oanda MT4 - Indicators and EAs not showing 2 replies

EAs and indicators relating to moutaki... 22 replies

InterbankFX has loaded its MT4 platform with custom EAs, indicators and scripts 1 reply

Attachments: I will code your EAs and Indicators for no charge
Exit Attachments

I will code your EAs and Indicators for no charge

  • #8,901
  • Aug 6, 2015 8:13am Aug 6, 2015 8:13am
I have a number of other indicator ideas for predicting the next move up/down in a currency pair, aside from the tick volume divergence idea I posted earlier. I'd be happy to post the logic for them along with pics of how I picture them looking, if anyone would be willing to code and share them here. This thread is awesome. Thx to all the coders helping the rest of us MQL4 'N00bs' out.
  • #8,902
  • Aug 6, 2015 8:45am Aug 6, 2015 8:45am
Quoting XxLessoxX
{quote} 1=closed 0=current {file}
Good Day Mr Lesso,
you have being very helpful to me.

In regards to this two ea, they are both mt4 files
They open trade on next bar after signal bar, I want it opening trade on the same bar as the signal bar,
And also i want the ea to increase or decrease lot size as to my trading balance.

Thank you very much in advance

Reagards,
Festus
Attached File(s)
File Type: mq4 SilverTrendSignal Alert EA.mq4   10 KB | 679 downloads
File Type: mq4 ASCTrend EA.mq4   9 KB | 731 downloads
Motivation is what gets you started. Habit is what keeps you going
  • #8,903
  • Aug 6, 2015 8:55am Aug 6, 2015 8:55am
Quoting cja
{quote} To shift the Fibo levels and labels to the left put in negative values {image}
dear cja you are so kind to me and made this indicator for me.i have zero knowledge about coding.....when i drag and drop say on euro usd pair it is ok and show indi n level but when change pair like gbp or other then indi vanish or not show up..is it possible to see it please ..thanks in advance
Say something meaningful or Silence!!
  • #8,904
  • Edited 9:27am Aug 6, 2015 9:13am | Edited 9:27am
Quoting efestus
{quote} Good Day Mr Lesso, you have being very helpful to me. In regards to this two ea, they are both mt4 files They open trade on next bar after signal bar, I want it opening trade on the same bar as the signal bar, And also i want the ea to increase or decrease lot size as to my trading balance. Thank you very much in advance Reagards, Festus {file} {file}
your indicator prints a signal when a bar closes and the ea takes the trade when the signal prints. otherwise if i changed the indi to print on a current bar, it would have several repainting false signals on that bar, giving the ea several trades on the same bar. you could limit the ea to only take one trade per bar, but it would take trades on any signal including the false signals that would have repainted. taking the trades after the bar and indi print is as good as it gets here. that being said i will make the EA for you to where you can change from a closed candle or current candle. but, i highly recommend taking trades on the closed candles as you would be trading far less false signals. i need the mq4 file for the asc trend indi that the the EA's are calling for..
  • #8,905
  • Aug 6, 2015 9:30am Aug 6, 2015 9:30am
Quoting XxLessoxX
{quote} your indicator prints a signal when a bar closes and the ea takes the trade when the signal prints. otherwise if i changed the indi to print on a current bar, it would have several repainting false signals on that bar, giving the ea several trades on the same bar. you could limit the ea to only take one trade per bar, but it would take trades on any signal including the false signals that would have repainted. taking the trades after the bar and indi print is as good as it gets here. that being said i will make the EA for you to where you...
Once again thank you very much Lesso,
you are right about multi trade per candle, but the indicator, has manage this itself by being programmed to open on trade per candle,
please do continue in making the ea open trade on the signal bar, and also in the trade management as to increasing and decreasing lot size as account balance.
for explain, i my balance was 100,000 at 1.00 lot, and balnce becomes 102,000, lot should increase to 1.02 as balance increase lot increase and balance reduce lot also should reduce, here are the files both ea would request for.

Regards.
Festus
Attached File(s)
File Type: mq4 SilverTrendSignal Alert.mq4   3 KB | 707 downloads
File Type: mq4 ASCTrend.mq4   3 KB | 662 downloads
Motivation is what gets you started. Habit is what keeps you going
  • #8,906
  • Aug 6, 2015 10:58am Aug 6, 2015 10:58am
Quoting efestus
{quote} Good Day Mr Lesso, you have being very helpful to me. In regards to this two ea, they are both mt4 files They open trade on next bar after signal bar, I want it opening trade on the same bar as the signal bar, And also i want the ea to increase or decrease lot size as to my trading balance. Thank you very much in advance Reagards, Festus {file} {file}
Hi Efestus
I have a proposal for an even better SILVERTREND.
As you may see on the attached chart, the signals (end of bar) are better than with your indicator. My version is in 2 differernt styles, I add the one which is placed on the price.
And I must add that the results are best on the 4 H charts!
I would appreciate if this indi could be implemented in an EA.
Thanks frends. And continue your great work.
Attached Image (click to enlarge)
Click to Enlarge Name: UK100H4 silver.png Size: 83 KB
Attached File(s)
File Type: mq4 SilverTrend rewritten by CrazyChart.mq4   4 KB | 1,059 downloads
  • #8,907
  • Aug 6, 2015 11:51am Aug 6, 2015 11:51am
Quoting wolfsch
{quote} Hi Efestus I have a proposal for an even better SILVERTREND. As you may see on the attached chart, the signals (end of bar) are better than with your indicator. My version is in 2 differernt styles, I add the one which is placed on the price. And I must add that the results are best on the 4 H charts! I would appreciate if this indi could be implemented in an EA. Thanks frends. And continue your great work.{image}{file}
Hi Wolfsch

what is the name of the arrow indicators on the chart

Thanks
  • #8,908
  • Aug 6, 2015 12:02pm Aug 6, 2015 12:02pm
Quoting wolfsch
{quote} Hi Efestus I have a proposal for an even better SILVERTREND. As you may see on the attached chart, the signals (end of bar) are better than with your indicator. My version is in 2 differernt styles, I add the one which is placed on the price. And I must add that the results are best on the 4 H charts! I would appreciate if this indi could be implemented in an EA. Thanks frends. And continue your great work.{image}{file}
what is printing the arrow on your chart?
  • #8,909
  • Edited 3:00pm Aug 6, 2015 12:16pm | Edited 3:00pm
Dear coders,

could somebody please wip up a simple EA so i can prove to someone that a strategy is a fail. All it has to do is open a buy and a sell at a new candle open, with TP and SL, possible Trail options...no indicators or anything else, plain price action. I had something like this in my database a looong time ago, but even if i can find it, it probably wont work with new MT versions.

Thank you.
Sincerely,
Josh
  • #8,910
  • Aug 6, 2015 3:30pm Aug 6, 2015 3:30pm
Quoting efestus
{quote} Once again thank you very much Lesso, you are right about multi trade per candle, but the indicator, has manage this itself by being programmed to open on trade per candle, please do continue in making the ea open trade on the signal bar, and also in the trade management as to increasing and decreasing lot size as account balance. for explain, i my balance was 100,000 at 1.00 lot, and balnce becomes 102,000, lot should increase to 1.02 as balance increase lot increase and balance reduce lot also should reduce, here are the files both ea...
here are two of them....i couldnt get either to work on strat tester though.
a better coder than me should look under the hood and see what is going on, maybe.
#1 uses silvertrend
#2 uses asc
Attached File(s)
File Type: mq4 Efestus#1EA.mq4   15 KB | 576 downloads
File Type: mq4 EfestusEA#2.mq4   12 KB | 565 downloads
  • #8,911
  • Aug 6, 2015 3:31pm Aug 6, 2015 3:31pm
Quoting wolfsch
{quote} Hi Efestus I have a proposal for an even better SILVERTREND. As you may see on the attached chart, the signals (end of bar) are better than with your indicator. My version is in 2 differernt styles, I add the one which is placed on the price. And I must add that the results are best on the 4 H charts! I would appreciate if this indi could be implemented in an EA. Thanks frends. And continue your great work.{image}{file}
i tried to get it to work in this EA, but it doesnt seem to initialize. a better coder than I may take an interest though.
Attached File(s)
File Type: mq4 Wolfsch.mq4   14 KB | 564 downloads
  • #8,912
  • Aug 6, 2015 3:52pm Aug 6, 2015 3:52pm
Hi
Is it possible to make an offline chart like this https://www.mql5.com/en/code/8588

Why?
Because it's opens new possibilities about managing an acount
  • #8,913
  • Aug 6, 2015 3:57pm Aug 6, 2015 3:57pm
Quoting XxLessoxX
{quote} what is printing the arrow on your chart?
Hi freds,
the normal aarows is the indicator of post 8909.
The arrows with rectangle are the hand placed arrows from my rewritten silvertrend (the better one) as of post 8910.
I hope that anybody can make an EA of it, because it is not repainting!
  • #8,914
  • Aug 6, 2015 4:25pm Aug 6, 2015 4:25pm
Quoting XxLessoxX
{quote} here are two of them....i couldnt get either to work on strat tester though. a better coder than me should look under the hood and see what is going on, maybe. #1 uses silvertrend #2 uses asc {file} {file}
Thank you very much for your time in recoding this EA Lesso,
But you missed out to important settings,
First ASC has two settings, the risk and countbar settings
and secondly, you had skipped the the lot size option.

regards,
Festus
Motivation is what gets you started. Habit is what keeps you going
  • #8,915
  • Aug 6, 2015 4:47pm Aug 6, 2015 4:47pm
Quoting classy
{quote} dear cja you are so kind to me and made this indicator for me.i have zero knowledge about coding.....when i drag and drop say on euro usd pair it is ok and show indi n level but when change pair like gbp or other then indi vanish or not show up..is it possible to see it please ..thanks in advance
I can not duplicate your problem as it loads on every chart I have tried, however it could possibly be that it needs to be compiled on a later build so here is the indicator compiled on MT4 build 840.
Attached File(s)
File Type: ex4 Drag & Drop levels.ex4   63 KB | 590 downloads
Trade what you see not what you hope
  • #8,916
  • Edited 11:21pm Aug 6, 2015 11:09pm | Edited 11:21pm
Quoting XxLessoxX
{quote} no problem at all.....replace with this one {file}
The EA seems to take trades while the CCI bar is forming, so it ends up taking about 30-40 trades per session instead of 10 or so. Is there a way for you to make it so that it only takes trades based on the close of the CCI bar?

EDIT:

Here is the file if anyone would be willing to help. The EA takes trades as the bar is forming, I need it to take trades only based on when the bar is closed. I.E. the trade should be opened at the start of the next bar based on how the bar before it closed. Closing and opening trades should only happen once the bar is closed, for a 5 Min TF, trades only every 5 mins, etc. If the previous bar closed red, it should sell, and close that trade only once a green bar has CLOSED, and then open up a buy and vice versa.
Attached File(s)
File Type: mq4 doublewoodycci.mq4   17 KB | 461 downloads
  • #8,917
  • Aug 7, 2015 6:15am Aug 7, 2015 6:15am
Hi all,

I am looking for two scripts ( or an EA ) which would help me do the following.

When I drop the sell script on any chart of any time frame, it should place 2 sell stop orders based on the last closed candle of the respective given time frame to which it is attached. The stop loss for both the orders would be the total length of the candle including wicks. One of the orders should have a take profit which is equal to the total height of the candle including the wicks. The other order would be without take profit.
So in effect, if i place this script on a one hour chart, it should place sell stop order and the stop loss would be the length of the last one hour closed candle including the wicks. The take profit for one order would be again the length of the last closed candle. The other order would be without a take profit level. If I place the same script of a daily candle, the stop loss levels and take profit level would be based on the last daily closed candle.

Similarly for buy script. It should place 2 buy stop order based on the last closed candle of the respective given time frame to which it is attached. The stop loss for both the orders would be the total length of the candle including wicks. One of the orders should have a take profit which is equal to the total height of the candle including the wicks. The other order would be without take profit.
So in effect, if i place this script on a one hour chart, it should place sell stop order and the stop loss would be the length of the last one hour closed candle including the wicks. The take profit for one order would be again the length of the last closed candle. The other order would be without a take profit level. If I place the same script of a daily candle, the stop loss levels and take profit level would be based on the last daily closed candle.

I request the coding experts to please consider my request and help me. I do not have or possess any coding knowledge and so this request. If such a script already exists, you may please guide me to the link or provide me the mq4 files.

As always, any and all help received by the experts is highly appreciated for taking the time out to help persons like me who do not have any coding knowledge or experience.

I am attaching two scripts below. These scripts work PARTIALLY similar to the script to what i desire. The one problem is, this places orders based on the last ONE HOUR CLOSED CANDLE ONLY ON ALL TIME FRAMES IRRESPECTIVE OF THE TIME FRAME TO WHICH IT IS ATTACHED. So when I attach this script to a 15 Minute time frame, the stop loss and take profit level is of the last closed one hour candle, but what I desire is the stop loss and take profit should be of the last 15M closed candle since I have attached the script to the 15M time frame.

Thanks in advance and warm regards
Attached File(s)
File Type: mq4 DIBS_SellStop.mq4   2 KB | 453 downloads
File Type: ex4 DIBS_BuyStop.ex4   5 KB | 367 downloads
File Type: mq4 DIBS_BuyStop.mq4   2 KB | 503 downloads
File Type: ex4 DIBS_SellStop.ex4   5 KB | 427 downloads
  • #8,918
  • Edited 1:06pm Aug 7, 2015 7:11am | Edited 1:06pm
Quoting cja
{quote} I can not duplicate your problem as it loads on every chart I have tried, however it could possibly be that it needs to be compiled on a later build so here is the indicator compiled on MT4 build 840. {file}
cja sorry to bother again ..may be i am so.....1st i open eu sd and drag indi ..ok but when i change pair gbp indi is not showing level though indi is still there ..see img ..any idea /tips ..thanks

cja sir....indicator showed after delete all object but after chage pair problem occuer another img for 5 dig broker and diff pair.it will be great if level and fibo by default showed just last hi to lo or lo to hi at any tf any pair
Attached Image(s) (click to enlarge)
Click to Enlarge Name: drag level on gbp.png Size: 57 KB
Click to Enlarge Name: 5 dig broker.png Size: 93 KB
Say something meaningful or Silence!!
  • #8,919
  • Aug 8, 2015 3:31am Aug 8, 2015 3:31am
i have request to all great coder of this threads ..if any one inerested to see it and make it ..actually i collect it from net and it interested me lot .i need a dash board which is check Tf 1h/4h/d....shows pair above/bellow 200 sma(like above/below under water) and may be give green/red arow or right /cross sign example euro usd above 200 sma mean euro green arow/right sign and usd red arow/cross sign .i am giving all words by original auther bellow for better understand :

Here’s what has worked for me…
I use a 4 hour chart with a 200 SMA on it. On a sheet of paper, a legal pad or an Excel spreadsheet, I list the currencies (not the pairs but the currencies themselves) in a vertical column. For example, EUR, USD, CHF, etc.
Now, let’s say the pair in question on the 4 hour chart is the EURUSD. If it is trading above the 200 SMA that means that the EUR is stronger than the USD at that point in time. I make a note of that next to the EUR and the USD in the vertical column…EUR gets an up arrow and the USD gets a down arrow. Then I go to the next currency and go through the same process. (All in all I bring up about 28 pairs on the charts each day before the open of the New York session and it takes less than 15 minutes.)
When I am done with the above process, I tally all the “up arrows ” and “down arrows” (as you can tell, I am VERY high tech!) for the EUR against the other currencies and then I can tell where the EUR ranks strength-wise relative to each of them. For example, if the EUR has 5 up arrows and 2 down arrows and the JPY has 3 up arrows and 4 down arrows, that means that the EUR, overall, is stronger than the JPY. (It doesn’t get much more simple than that!) When I have all the currencies in which I am interested evaluated in this way, I then have an overview of how they all relate to each other based on strength/weakness.
Next, I match the strongest with the weakest and go to the charts and look for a technical reason, such as a break of support or resistance, to enter the trade in the direction of the trend. A pair that has a strong currency paired against a weak currency would be a candidate for a buy in a Daily uptrend. On the other hand, a weak paired against a strong would be a candidate for a sell in a Daily downtrend.
As far as the pairs that I personally look at, I run this analysis on all combinations of the following currencies: USD, EUR, GBP, JPY, AUD, NZD, CHF and CAD.
The process is very basic, straightforward and quite boring – but it works.
As a side benefit, while I am going through the process of checking the 4 hour chart on each pair, I really get a sense for what is going on in the market at the time. And that information serves me well as the trading day progresses.
Sidebar: If you are a shorter term trader, you can follow exactly the same process on a shorter time frame chart.
Say something meaningful or Silence!!
  • #8,920
  • Aug 8, 2015 7:19am Aug 8, 2015 7:19am
Hi classy,
Check this great indy http://www.forexfactory.com/showthre...89#post8417289 , change the default values to 200 sma and choose any TF and ready to go for your strategy...
Regards
185 traders viewing now, 1 is registered:
maolincrei