I will code your EAs and Indicators for no charge | Page 411 | Crypto Craft

Options

Go to
Permalinks
Print Thread

Similar Threads

I will code your pivot EAs for no charge 28 replies

I will code your scalping EAs for no charge 163 replies

Oanda MT4 - Indicators and EAs not showing 2 replies

EAs and indicators relating to moutaki... 22 replies

InterbankFX has loaded its MT4 platform with custom EAs, indicators and scripts 1 reply

Attachments: I will code your EAs and Indicators for no charge
Exit Attachments

I will code your EAs and Indicators for no charge

  • #8,201
  • May 27, 2015 5:39pm May 27, 2015 5:39pm
Quoting limprobable
{quote} Thanks a lot TraderJoe it works great... Sorry i forgot to mention, could you add 10080 timeframe please. Sorry asking this now. Anyway thanks for your time and your noble-mindedness

10080 added...

Attached File(s)
File Type: ex4 GG-TimeBoxMTF+.ex4   12 KB | 511 downloads
Charts never lie! (everyone else does) ... now where's that FF Adult lounge
  • #8,202
  • May 27, 2015 5:41pm May 27, 2015 5:41pm
Quoting teleblue
{quote} That's almost it, but not quite. Thanks for the help!
Well that explains it!
Charts never lie! (everyone else does) ... now where's that FF Adult lounge
  • #8,203
  • May 27, 2015 6:07pm May 27, 2015 6:07pm
Attached File(s)
File Type: ex4 kingpips01.1.ex4   10 KB | 642 downloads
Quoting bivt
Hello coders, i need some help to modify indicators. everytime cci cross or touch 0 line or +100/-100 give me an alert. the indicator now only give signal when cci cross +100/-100 thank you. {file}
Here... I added an extern so you can type any positive number (including 0).
Alse added a comment which displays the CCI setting which you can turn on or off.

Attached File(s)
File Type: ex4 kingpips01.1.ex4   10 KB | 642 downloads
Charts never lie! (everyone else does) ... now where's that FF Adult lounge
  • #8,204
  • May 27, 2015 7:25pm May 27, 2015 7:25pm
Quoting TraderJoe
{file}{quote} Here... I added an extern so you can type any positive number (including 0). Alse added a comment which displays the CCI setting which you can turn on or off. {file}
thank you TraderJoe.
  • #8,205
  • Edited 9:42pm May 27, 2015 9:25pm | Edited 9:42pm
Quoting TraderJoe
{quote} There are several management ea's around... do a search here and try a few.
TraderJoe,

Thanks for your reply.

I've been searching and trying for such ea, but nothing seems to work exactly as I need it. I've tried MPTM, Multi prupose trade manager, SImpleallpairbasketmanager, etc...
If you could point me to such ea, that will be great.

I tried to make something like below (don't laugh... I'm learning), but not working:

This part is to send opposite order.

if (SendLock) Lock();

void Lock()
{
string Symb="";
for(int i=1; i<=OrdersTotal(); i++){
if (OrderSelect(i-1,SELECT_BY_POS,MODE_TRADES)==true)
if(OrderMagicNumber()==MagicNumber && OrderSymbol()==Symb) {
double BuyStopPrice = OrderOpenPrice()+ PipsToAddLot * Pipfactor;
double SellStopPrice = OrderOpenPrice()- PipsToHedge * Pipfactor;

if (OrderComment()==TradeComment){
if (OrderType() == OP_BUY) BuyOrderCount++;
if (OrderType() == OP_SELL) SellOrderCount++;
}
if (OrderComment()==HedgeComment){
if (OrderType() == OP_BUY) BuyHedgeOrderCount++;
if (OrderType() == OP_SELL) SellHedgeOrderCount++;
if (OrderType() == OP_BUYSTOP) BSHedgeOrderCount++;
if (OrderType() == OP_SELLSTOP) SSHedgeOrderCount++;
}

if (OrderComment()==AddComment){
if (OrderType() == OP_BUY) BuyAddOrderCount++;
if (OrderType() == OP_SELL) SellAddOrderCount++;
if (OrderType() == OP_BUYSTOP) BSAddOrderCount++;
if (OrderType() == OP_SELLSTOP) SSAddOrderCount++;
}

if(BuyOrderCount == 1 && SellHedgeOrderCount == 0 && SSHedgeOrderCount == 0){
ticket =OrderSend(Symb, OP_SELLSTOP, lot, SellStopPrice, vSlipage, 0, 0, HedgeComment, MagicNumber, 0, CLR_NONE);
if(ticket<0)
{
Print("OrderSend failed with error #",GetLastError());
}
else
Print("OrderSend placed successfully");
}
if(SellOrderCount == 1 && BuyHedgeOrderCount == 0 && BSHedgeOrderCount == 0){
ticket=OrderSend(Symb, OP_BUYSTOP, lot, BuyStopPrice, vSlipage, 0, 0, HedgeComment, MagicNumber, 0, CLR_NONE);
if(ticket<0)
{
Print("OrderSend failed with error #",GetLastError());
}
else
Print("OrderSend placed successfully");
}
}
}
} //End Lock

If you can take a look at this code and make it works.... please.

Thanks
  • #8,206
  • May 27, 2015 11:05pm May 27, 2015 11:05pm
If I used a trade manager I would suggest one. There are lots of people here that use them, maybe someone here can suggest a good one for you.




Quoting jidonk
{quote} TraderJoe, Thanks for your reply. I've been searching and trying for such ea, but nothing seems to work exactly as I need it. I've tried MPTM, Multi prupose trade manager, SImpleallpairbasketmanager, etc... If you could point me to such ea, that will be great. I tried to make something like below (don't laugh... I'm learning), but not working: This part is to send opposite order. if (SendLock) Lock(); void Lock() { string Symb=""; for(int i=1; i<=OrdersTotal(); i++){ if (OrderSelect(i-1,SELECT_BY_POS,MODE_TRADES)==true) if(OrderMagicNumber()==MagicNumber...
Charts never lie! (everyone else does) ... now where's that FF Adult lounge
  • #8,207
  • May 27, 2015 11:10pm May 27, 2015 11:10pm
Quoting TraderJoe
{file}{quote} ok ok.... try this...
Thank you so much Joe. It became more useful now.
I really appreciate your support.
Have a good day.
Simplicity is the ultimate sophistication - Leonardo da Vinci
  • #8,208
  • May 27, 2015 11:54pm May 27, 2015 11:54pm
Quoting TraderJoe
{file}{quote} Here... I added an extern so you can type any positive number (including 0). Alse added a comment which displays the CCI setting which you can turn on or off. {file}
hii TraderJoe, Thank you for your help, i just tested out the indicator that you modify, it just can one of them send alert, i want that indicator crossing 0 AND 100 give me alert, would you modify it again.
thank you
  • #8,209
  • May 28, 2015 2:10am May 28, 2015 2:10am
Dear Coders

Can anybody create a simply indicator to show only Dots for highs and lows of price (so no candle).

Need to be able to adjust dot colour and size if possible.

I want to do away with the candles themselves and just have a simple MA showing close and dots to show highs and lows.

Would be very grateful indeed if this could be done.

Kind regards
Robert
  • #8,210
  • May 28, 2015 3:47am May 28, 2015 3:47am
@TraderJoe and other coders in the forum please can you take a look at the indicator attached below

When I set the input “allSymbols” – True, the indicator does not display the correct number of pips for all Pairs

But when I set the input “allSymbols” – False, the indicator display the correct number of pips for a single Pair

Please can you help me fix the error?
Attached File(s)
File Type: ex4 pipsometer_decimal.ex4   13 KB | 414 downloads
File Type: mq4 pipsometer_decimal.mq4   5 KB | 482 downloads
  • #8,211
  • May 28, 2015 3:52am May 28, 2015 3:52am
Quoting bivt
{quote} hii TraderJoe, Thank you for your help, i just tested out the indicator that you modify, it just can one of them send alert, i want that indicator crossing 0 AND 100 give me alert, would you modify it again. thank you

I did not find a reason it should not work but I went through it again anway and made a few changes. Try it.
Attached Image (click to enlarge)
Click to Enlarge Name: kingpipsUP-DN.JPG Size: 202 KB
Attached File(s)
File Type: ex4 kingpips01.2.ex4   11 KB | 630 downloads
Charts never lie! (everyone else does) ... now where's that FF Adult lounge
  • #8,212
  • May 28, 2015 4:06am May 28, 2015 4:06am
Quoting Evasparkling
@TraderJoe and other coders in the forum please can you take a look at the indicator attached below When I set the input allSymbols True, the indicator does not display the correct number of pips for all Pairs But when I set the input allSymbols False, the indicator display the correct number of pips for a single Pair Please can you help me fix the error? {file} {file}

Please provide a screenshot of what you are saying.
Charts never lie! (everyone else does) ... now where's that FF Adult lounge
  • #8,213
  • May 28, 2015 4:25am May 28, 2015 4:25am
Quoting TraderJoe
{quote} 10080 added... {file}
Many thanks.

Green pips
Bottomless wonders spring from simple rules, which are repeated without end
  • #8,214
  • May 28, 2015 5:50am May 28, 2015 5:50am
Quoting TraderJoe
{quote} Please provide a screenshot of what you are saying.
Attached below are the screenshots
As you can see there are four floating orders (3 GBP/USD Sell and 1 EUR/USD buy)
The indicator is attached to GBP/USD M15
Then I set the input “allSymbols” to True, the indicator displays the number of floating pips for both GBP/USD and EUR/USD as +4549.3 This figure is incorrect. The correct number of floating pips both GBP/USD and EUR/USD is +193.0
Attached Image (click to enlarge)
Click to Enlarge Name: AllSymbols Set To True.png Size: 109 KB
  • #8,215
  • May 28, 2015 5:50am May 28, 2015 5:50am
Quoting TraderJoe
{quote} Please provide a screenshot of what you are saying.
Attached below are the screenshots
As you can see three are four floating orders (3 GBP/USD Sell and 1 EUR/USD buy)
The indicator is attached to GBP/USD M15
Then I set the input “allSymbols” to False, the indicator displays the number of floating pips for only GBP/USD as +180.0 This figure is correct. The correct number of floating pips for only GBP/USD is +180.0
Attached Image (click to enlarge)
Click to Enlarge Name: AllSymbols Set To False.png Size: 109 KB
  • #8,216
  • May 28, 2015 7:09am May 28, 2015 7:09am
Quoting TraderJoe
{quote} I did not find a reason it should not work but I went through it again anway and made a few changes. Try it. {file} {image}
thank you TraderJoe. I really appreciate .

always green pips
  • #8,217
  • May 28, 2015 9:02am May 28, 2015 9:02am
Good Morning gentlemen,

I have 5 setups that I like to look for and was wondering if anyone could possibly code it to an indicator for me and anyone else that would like to use it.
The 5th setup would probably be a bear to code but I'll post all 5 setups.

ENTRY 1: Against the trend setup . 2 bearish closes below the 25 SMA when the 25 SMA is above the 100 SMA or 2
bullish closes above the 25 SMA when the 25 SMA is below the 100 SMA

ENTRY 2 : With the trend setup . 2 bearish closes below the 25 SMA when the 25 SMA is below the 100 SMA or 2
bullish closes above the 25 SMA when the 25 SMA is above the 100 SMA

ENTRY 3 : Against the trend setup . Bull/bear/bull 3 candle formation. These candles must be the first 3 candles
to close above the 25 SMA but while the 25 SMA is below the 100 SMA or in the other direction it would be
Bear/bull/bear 3 candle formation closing below 25 SMA but while the 25 SMA is above the 100 SMA

ENTRY 4 : With the trend setup . Bull/bear/bull 3 candle formation. The first 3 candles to close above the 25
SMA while the 25 SMA is above the 100 SMA or in the opposite direction a Bear/bull/bear 3 candle formation
closing below the 25 SMA while the 25 SMA is below the 100 SMA

ENTRY 5 : With the trend setup . A clear strong looking trend must be already established . Strong
bullish or bearish candle in the direction of the trend, followed by small retracement candles in
opposite direction. Place order below the low / above the high of the mother candle. Stop loss can either be
above the high of the mother candle or above last pivot (last swing, not the last absolute swing).

I would greatly appreciate it if someone could possibly code it or post an indicator that can already do this. I realize it may not be possible to code any of this, but thought I'd ask if it is possible.

Thank you!
  • #8,218
  • May 28, 2015 7:11pm May 28, 2015 7:11pm
Quoting RobertBazil
Dear Coders Can anybody create a simply indicator to show only Dots for highs and lows of price (so no candle). Need to be able to adjust dot colour and size if possible. I want to do away with the candles themselves and just have a simple MA showing close and dots to show highs and lows. Would be very grateful indeed if this could be done. Kind regards Robert
Attached File(s)
File Type: ex4 HiLo Dots.ex4   31 KB | 593 downloads
Trade what you see not what you hope
  • #8,219
  • May 28, 2015 10:45pm May 28, 2015 10:45pm
Quoting Evasparkling
{quote} Attached below are the screenshots As you can see there are four floating orders (3 GBP/USD Sell and 1 EUR/USD buy) The indicator is attached to GBP/USD M15 Then I set the input allSymbols to True, the indicator displays the number of floating pips for both GBP/USD and EUR/USD as +4549.3 This figure is incorrect. The correct number of floating pips both GBP/USD and EUR/USD is +193.0 {image}
Please try if this works for you.
Attached File(s)
File Type: ex4 pipsometer_decimal_v1.01.ex4   13 KB | 535 downloads
Charts never lie! (everyone else does) ... now where's that FF Adult lounge
  • #8,220
  • May 28, 2015 11:42pm May 28, 2015 11:42pm
Quoting TraderJoe
{file}{quote} Here... I added an extern so you can type any positive number (including 0). Alse added a comment which displays the CCI setting which you can turn on or off. {file}
Hi Joe!

Could you please also attach the mq4 file.
Thanks
256 traders viewing now