I will code your EAs and Indicators for no charge

I have only tested this very little.
I believe that it does what you want.
Let me know if there are problems.
Sometimes, the brokers will not allow a pending order if too close to the current price. This should open a pending if price moves far enough away or open a trade if price hits the trigger level.

EDIT - I forgot to say that the hotkey is "t"

that won´t work. not because of the system, thats not a bad idea if the account is big enough for the exponential grow, the problem is the dynamic spread and the slippage...
you will have your profits but they won´t overcome the losses as expected, after level 7 and an exposure of 64lots, your net win after TP is 6pip with 0.1lot?
one or two times a slippage of 3pip at a higher level and 10times the win of the start lot is gone...

Sorry, I didn't mention that the hotkey is "t"
Silly me!

Hi,
i found an interesting (for me at least) strategy... If you find time or interest in making an EA:

Long Signal
EMA 5 crosses from bellow the EMA 13 [when candle closes, not right away, because it could go back and the cross would disapear]
OsMA is above zero.... settings: 18,30,8

Short Signal
EMA 5 crosses EMA 13 from above [when candle closes, not right away, because it could go back and the cross would disapear]
OsMA is bellow zero.... settings are again: 18,30,8

OsMA - MA of oscillator...

Take Profit = Oposite conditions for a trade. Stop loss = should be input manualy when the indicator is put on the chart

We can add Parabolic SAR for extra confirmation as well - When the dot is bellow the candles - Long, when above - Short.

Bare in mind that all 3 conditions should be met for a position to be opened - EMA cross, OsMA being above or bellow, and (if put in) parabolic sar to display a dot in for in the same direction as the 2 other signals.

Please reply if you are going to do this or not :-)

With respect,

Emil

Dear FDT, kindly code to include pop up on the alert.

Best regards

...

Can this be amended for build 670 which I use on a mac please

Thanks in advance

use the build 509 compiler (forumsearch)

Thanks Fxdaytrader

It will compile if you change line 39 from
string objNames[0];
to
string objNames[];

Dear FDT, thank you for the modification, it works, however, when I load the indicator on the chart, i am not able to see where it has landed on the chart, probably include an option(a variable) where by I can manually type in a price value. Originally, when I load it on the chart, for example, it would place the horizontal line at the spot bid price, then i move it where I need it to be placed.

Regards

I am rather sure that I have mod. an hl/trendline alert ages ago and uploaded it somewhere here in the forum, so I have no fun to work on it again ...

please can someone help me after the last mql4 update this trade copy stop working can someone help me to correct the errors and make the compile work again with the new update.thank this the code

i need AFL TO MQ4 converter for following afl code can anybody help me ?
Thanks.
TimeFrameSet(inDaily);
DayHigh = LastValue(H);
DayLow = LastValue(L);
TimeFrameRestore();
Title = Date() + ", Op=" + Open + ", Hi=" + High + ", Lo=" + Low + ", LTP=" + Close + ", Change= " + SelectedValue( ROC( C, 1 ) ) + "%" + "\n Today`s High=" + DayHigh + ", Today`s Low=" + DayLow + " PRIME SYSTEM" ;

prev=AMA2(C,1,0);
d=IIf(C>Ref(Max(Max(H,Ref(H,-20)),Max(Ref(H,-10),Ref(H,-15))),-1),Min(Min(L,Ref(L,-20)),Min(Ref(L,-10),Ref(L,-15))),
IIf(C<Ref(Min(Min(L,Ref(L,-20)),Min(Ref(L,-10),Ref(L,-15))),-1),Max(Max(H,Ref(H,-20)),Max(Ref(H,-10),Ref(H,-15))),PREV));
a=Cross(Close,d);
b=Cross(d,Close);
state=IIf(BarsSince(a)<BarsSince(b) ,1,0);
s=state>Ref(state,-1);
ss=state<Ref(state,-1);
sss=state==Ref(state,-1);
col=IIf(state == 1 ,51,IIf(state ==0,4,1));
Plot(C,"",Col,64);
Buy = s;
Sell = ss;
shape = Buy * shapeUpArrow + Sell * shapeDownArrow;
PlotShapes(shape, IIf(Buy,colorGreen,colorRed), 0, IIf(Buy,Low,High));
PlotShapes(IIf(Buy, shapeSquare, shapeNone),colorGreen, 0, L, Offset=-10);
PlotShapes(IIf(Buy, shapeSquare, shapeNone),colorLime, 0,L, Offset=-20);
PlotShapes(IIf(Buy, shapeUpArrow, shapeNone),colorWhite, 0,L, Offset=-15);
PlotShapes(IIf(Sell, shapeSquare, shapeNone),colorRed, 0, H, Offset=20);
PlotShapes(IIf(Sell, shapeSquare, shapeNone),colorOrange, 0,H, Offset=30);
PlotShapes(IIf(Sell, shapeDownArrow, shapeNone),colorWhite, 0,H, Offset=-25);
//WriteIf(s,"EXIT all Short positions\nif trading long positions, enter long Now-\nOR at the market price on tomorrow's Open with stop="+EncodeColor(4)+WriteVal(L+.7 5*ATR(5),1.4)+" ,","");
//WriteIf(ss,"exit all long positions today with a Market On Close (MOC) order\nOR at the market price on tomorrow's Open with stop="+EncodeColor(4)+WriteVal(Ref( H+.75*ATR(5), -1),1.4)+",","");
//WriteIf( sss ,"No trading signals today.","") ;

dist = 0.8*ATR(10);
dist1 = 2*ATR(10);
for( i = 0; i < BarCount; i++ )
{
if( Buy[i] )
{
PlotText( "\nBuy:" + L[ i ] + "\nT= " + (L[i]*1.005) + "\nSL= " + (L[i]*0.9975), i, L[ i ]-dist[i], colorGreen, colorWhite );
}
if( Sell[i] )
{
PlotText( "Sell:" + H[ i ] + "\nT= " + (H[i]*0.995) + "\nSL= " + (H[i]*1.0025), i, H[ i ]+dist1[i], colorRed, colorWhite );
}
}

Filter = s OR sss OR sss ;
AddColumn(C,"close",1.2);
AddColumn( IIf( s, 66,1 ), "buy", formatChar, 1, bkcolor =IIf (s,colorYellow, colorPink ));
AddColumn( IIf( Ss, 83,1 ), "sell", formatChar, 1, bkcolor =IIf (Ss,colorPink, colorWhite ));
AddColumn( IIf( sss, 87,1 ), "wait", formatChar, 1, bkcolor =IIf (sss,colorYellow, colorRed ));

_SECTION_BEGIN("swing1");
no=20;
res=HHV(H,no);
sup=LLV(L,no);
avd=IIf(C>Ref(res,-1),1,IIf(C<Ref(sup,-1),-1,0));
avn=ValueWhen(avd!=0,avd,1);
supres=IIf(avn==1,sup,res);
a=Cross(C,supres);
b=Cross(supres,C);
style = a * styleStaircase + b * styleStaircase;
PlotShapes(a,style, IIf(a,colorGreen,colorRed), 0, IIf(a,Low,High));
Plot(supres,"Swing",colorYellow,sty leStaircase);
_SECTION_END();

_SECTION_BEGIN("trend");
uptrend=PDI(20)>MDI(10)AND Signal(29)<MACD(13);
downtrend=MDI(10)>PDI(20)AND Signal(29)>MACD(13);
Plot( 2, /* defines the height of the ribbon in percent of pane width */"ribbon",
IIf( uptrend, colorGreen, IIf( downtrend, colorRed, 0 )), /* choose color */
styleOwnScale|styleArea|styleNoLabe l, -0.5, 100 );
_SECTION_END();
Buy = s AND a AND uptrend ;
Short = ss AND b AND downtrend ;
Sell = ss AND b AND downtrend ;
Cover = s AND a AND uptrend ;
Buy=ExRem(Buy,Sell);
Sell=ExRem(Sell,Buy);
Cover=ExRem(Cover,Short);
Short=ExRem(Short,Cover);
Filter=Buy OR Sell;
Filter= Cover OR Short;
AddColumn( Buy, "Buy", 1);
AddColumn(Sell, "Sell", 1);
AddColumn(Close,"Close",1.2);
AddColumn(Volume,"Volume",1.0);

// Plot the Buy and Sell arrows.
shape = Buy * shapeUpArrow + Sell * shapeDownArrow;
PlotShapes(IIf(Buy, shapeSquare, shapeNone),colorGreen, 0, L, Offset=-10);
PlotShapes(IIf(Buy, shapeSquare, shapeNone),colorLime, 0,L, Offset=-20);
PlotShapes(IIf(Buy, shapeUpArrow, shapeNone),colorWhite, 0,L, Offset=-15);
PlotShapes(IIf(Sell, shapeSquare, shapeNone),colorRed, 0, H, Offset=20);
PlotShapes(IIf(Sell, shapeSquare, shapeNone),colorOrange, 0,H, Offset=30);
PlotShapes(IIf(Sell, shapeDownArrow, shapeNone),colorWhite, 0,H, Offset=-25);


//plot volume graph
// set background gradient colours
SetChartBkGradientFill( ParamColor("BgTop", ColorRGB( 172,172,172 )),ParamColor("BgBottom", ColorRGB( 102,136,187 )),ParamColor("titleblock",ColorRGB ( 255,255,255 )));
GraphXSpace = 5;

Many Many thanks!

why do you post your request lots of times? One time should be enough, if you spam every thread probably nobody likes to help.
afl to mq4, maybe you post at mql5.com/en/job also, perhaps somebody who knows both the languages will read your request

use the build 509 compiler (forumsearch)

Thanks

Brother ,
i have not post it on mql5.
i post this at only 2 threads.

Thanks to guide.
Regards
Amol

Hi fxdaytrader
can u code the alert on the indicator