I will code your EAs and Indicators for no charge

Quoting Vantage

Disliked

Is it possible to write an EA using the FF news calendar indi as a basis for trades? I'm looking specifically at the high impact Asian session news releases that move aud, euraud and gbpaud typically in 1 direction and unless I'm wrong without the extreme volatility that can slip/jump pending orders during UK and US news releases. Thanks in advance.

Ignored

Quoting Mroue26

Disliked

thanx for ur help bro but i dont have coding skills if its easy on u and wont take much time can u please modify it?

Ignored

Quoting rockit

Disliked

{quote} OK no problem. To make it compile in 509, change "input" to "extern" and "OnInit()" to "init()" and "OnTick()" to "start()". It should compile then.

Ignored

Quoting x-josef

Disliked

I forgot to say that by using an expert like this I don't have to set the take profit, I open the position only with the stop loss.

Ignored

input double SL = 30;
input double PROFIT = 100;
double f = 1;
bool tsl = false;
void OnInit()
{
    if(Digits == 5 || Digits == 3) f *= 10;
}
void OnTick()
{
    for(int i = 0; i < OrdersTotal(); i++) {
        if(OrderSelect(i, SELECT_BY_POS)) {
            if(OrderType() == OP_BUY) {
                if(OrderStopLoss() > OrderOpenPrice()) {
                    if((MarketInfo(OrderSymbol(), MODE_BID) - OrderStopLoss()) > f*SL)
                        if(!OrderModify(OrderTicket(), OrderOpenPrice(), MarketInfo(OrderSymbol(), MODE_BID) - f * SL * MarketInfo(OrderSymbol(), MODE_POINT), 0, 0))
                            Print("order modify failed..);
                }
                else if((MarketInfo(OrderSymbol(), MODE_BID) - OrderOpenPrice()) >= (f * PROFIT * MarketInfo(OrderSymbol(), MODE_POINT))) {
                    OrderModify(OrderTicket(), OrderOpenPrice(), MarketInfo(OrderSymbol(), MODE_BID) - f * SL * MarketInfo(OrderSymbol(), MODE_POINT), 0, 0);
                }
            }
            else if(OrderType() == OP_SELL) {
                if(OrderStopLoss() < OrderOpenPrice()) {
                    if((OrderStopLoss() - MarketInfo(OrderSymbol(), MODE_ASK)) > f*SL)
                        if(!OrderModify(OrderTicket(), OrderOpenPrice(), MarketInfo(OrderSymbol(), MODE_ASK) + f * SL * MarketInfo(OrderSymbol(), MODE_POINT), 0, 0))
                            Print("order modify failed..);
                }
                else if((OrderOpenPrice() - MarketInfo(OrderSymbol(), MODE_ASK)) >= (f * PROFIT * MarketInfo(OrderSymbol(), MODE_POINT))) {
                    OrderModify(OrderTicket(), OrderOpenPrice(), MarketInfo(OrderSymbol(), MODE_ASK) + f * SL * MarketInfo(OrderSymbol(), MODE_POINT), 0, 0);
                }
            }
        }
    }
}

Quoting rockit

Disliked

{quote} What exactly do you want to trade, i.e. input parameters. What exactly should it do (other than waiting for the time)?

Ignored

Quoting Mroue26

Disliked

I just want it to put Sell stop and buy stop with their tp and sl on time set in seconds

Ignored

 
// expert - test trade on set time
 
input int HOUR = 9; // open hour
input int MIN = 0; // open minute
input int SEC = 0; // open second
input double VOL = 0.01; // lots
input double DIST = 10; // pip distance
input double SL = 10; // stop loss pips
input double TP = 10; // take profit pips
 
double f = 1;
int ticket;
bool sb = false;
bool ss = false;
 
void OnInit()
{
    if(Digits == 5 || Digits == 3) f *= 10;
    MqlDateTime now;
    while(true)
    {
        TimeToStruct(TimeLocal(), now);
        if(now.hour == HOUR && now.min == MIN && now.sec >= SEC)
        {
            RefreshRates();
            double price = Bid + DIST*f*Point;
            ticket = OrderSend(Symbol(), OP_BUYSTOP, VOL, price, 0, 0, 0);
            if(ticket != -1)
            {
                if(OrderModify(ticket, price, price - SL*f*Point, price + TP*f*Point, 0))
                    sb = true;
                else OrderDelete(ticket);
            }
            price = Bid - DIST*f*Point;
            ticket = OrderSend(Symbol(), OP_SELLSTOP, VOL, price, 0, 0, 0);
            if(ticket != -1)
            {
                if(OrderModify(ticket, price, price + SL*f*Point, price - TP*f*Point, 0))
                    ss = true;
                else OrderDelete(ticket);
            }
            if(sb) Print("set stop buy succeeded.. "); else Print("set stop buy failed.. ");
            if(ss) Print("set stop sell succeeded.. "); else Print("set stop sell failed.. ");
            break;
        }
        Sleep(992);
    }
    ExpertRemove();
}

Quoting rockit

Disliked

{quote} Where (and from where) to put the stops? I assume that the stops have to be put at a distance from the price that is current at the set time. State the exact input parameters, i.e. hours, minutes, seconds, sl, distance from current price, volume, slippage... etc. Here is a code for build 600+ // expert - test trade on set time input int HOUR = 9; // open hour input int MIN = 0; // open minute input int SEC = 0; // open second input double VOL = 0.01; // lots input double DIST = 10; // pip distance input double SL = 10; // stop loss pips...

Ignored

Quoting rockit

Disliked

{quote} Where (and from where) to put the stops? I assume that the stops have to be put at a distance from the price that is current at the set time. State the exact input parameters, i.e. hours, minutes, seconds, sl, distance from current price, volume, slippage... etc. Here is a code for build 600+ // expert - test trade on set time input int HOUR = 9; // open hour input int MIN = 0; // open minute input int SEC = 0; // open second input double VOL = 0.01; // lots input double DIST = 10; // pip distance input double SL = 10; // stop loss pips...

Ignored

Quoting Mroue26

Disliked

would this attached .mq4 EA file help?

Ignored

Quoting Mroue26

Disliked

GREAT IT WORKS JUST FINE thank youuuuuuuuuuuuuuu very muchh but there is this at the end ExpertRemove () ; the ea if the market is not meeting conditions maybe or broker conditions the ea is been removed ?

Ignored

Quoting rockit

Disliked

{quote} The expert will remove itself when it has done the job. Meaning, when the time for its action has come it will try to place the orders (it it fails so it will delete the failed order), then it will remove itself, because job done (time winodow has passed by then and the expert should not be active anymore anyway).

Ignored

Quoting Mroue26

Disliked

thank you so much Rockit!! i have 1 other question,... orders made, SL, and TP can be made invisible for the broker? i.e: Gold orders, tp and sl have to be 300 pips away with my Broker is there any thing can be added to the EA that helps?

Ignored

Quoting rockit

Disliked

{quote} Sure they can be kept "hidden", meaning that they remain in control of the expert, on the client's terminal, as opposed to reside on the server. However, this comes at the cost of speed, as the expert would have to place the close order itself; then the order would have to travel to the server, be accepted by the server, and, finally, executed. This takes some time, a few hundred milliseconds.. I don't know if this is a good idea under conditions where price is bouncing quickly and every millisecond counts. However, given the enormous spreads...

Ignored

Quoting Evasparkling

Disliked

Dear rockit I was wondering if you will be able to code a HH LH LL HL indicator

Ignored

Quoting Mroue26

Disliked

{quote} manually everything is allowed but orders and sl,tp are not.. all currencies have 2 or 3 pips spread and orders must be 25 pips away minimum, what do u think if we add input parameters to define take profit and stop loss by $ not pips,, lets say the order is triggered and the trade is in 1000$ profit when it reaches the desired ammount it will close without making a TP order? i think its possible i have another ea that just close trades on $.

Ignored

 
// expert - test trade on set time
 
input int HOUR = 21; // open hour
input int MIN = 27; // open minute
input int SEC = 33; // open second
input double VOL = 0.01; // lots
input double DIST = 10; // pip distance
input double SLCASH = -100; // stop loss dollars
input double TPCASH = 100; // take profit dollars
 
double f = 1;
int ticketsb, ticketss;
bool sb = false;
bool ss = false;
 
void OnInit()
{
    if(Digits == 5 || Digits == 3) f *= 10;
    MqlDateTime now;
 
    while(true)
    {
        TimeToStruct(TimeLocal(), now);
        if(now.hour == HOUR && now.min == MIN && now.sec >= SEC)
        {
            RefreshRates();
            ticketsb = OrderSend(Symbol(), OP_BUYSTOP, VOL, Ask + DIST*f*Point, 0, 0, 0);
            if(ticketsb != -1)
                sb = true;
            else OrderDelete(ticketsb);
            ticketss = OrderSend(Symbol(), OP_SELLSTOP, VOL, Bid - DIST*f*Point, 0, 0, 0);
            if(ticketss != -1)
                ss = true;
            else OrderDelete(ticketss);
            if(sb) Print("set stop buy succeeded.. "); else Print("set stop buy failed.. ");
            if(ss) Print("set stop sell succeeded.. "); else Print("set stop sell failed.. ");
            break;
        }
        Sleep(992);
    }
}
void OnTick()
{
    if(OrderSelect(ticketsb, SELECT_BY_TICKET)) {
        if(OrderProfit() >= TPCASH) {
            if(OrderClose(ticketsb, OrderLots(), Bid, 0)) {
                Print("buy stop order closed on profit target hit.. ");
                ticketsb = -1;
            }
        }
        else if(OrderProfit() <= SLCASH) {
            if(OrderClose(ticketsb, OrderLots(), Bid, 0)) {
                Print("buy stop order closed on loss target hit.. ");
                ticketsb = -1;
            }
        }
    }
    if(OrderSelect(ticketss, SELECT_BY_TICKET)) {
        if(OrderProfit() >= TPCASH) {
            if(OrderClose(ticketss, OrderLots(), Ask, 0)) {
                Print("sell stop order closed on profit target hit.. ");
                ticketss = -1;
            }
        }
        else if(OrderProfit() <= SLCASH) {
            if(OrderClose(ticketss, OrderLots(), Ask, 0)) {
                Print("sell stop order closed on loss target hit.. ");
                ticketss = -1;
            }
        }
    }
    if(ticketsb == -1 && ticketss == -1) ExpertRemove();
}