I will code your EAs and Indicators for no charge | Page 179 | Crypto Craft

Options

Go to
Permalinks
Print Thread

Similar Threads

I will code your pivot EAs for no charge 28 replies

I will code your scalping EAs for no charge 163 replies

Oanda MT4 - Indicators and EAs not showing 2 replies

EAs and indicators relating to moutaki... 22 replies

InterbankFX has loaded its MT4 platform with custom EAs, indicators and scripts 1 reply

Attachments: I will code your EAs and Indicators for no charge
Exit Attachments

I will code your EAs and Indicators for no charge

  • #3,561
  • Jan 22, 2014 1:28am Jan 22, 2014 1:28am
Please help me modify with this mql code. I want it to have mql sepately. One would close and reverse only buy position and one that will only close and reverse sell position. All same except the modification.

I have attached the mql below
Attached File(s)
File Type: mq4 Close and Reverse.mq4   2 KB | 641 downloads
  • #3,562
  • Jan 22, 2014 8:34am Jan 22, 2014 8:34am
An SOS to one and all!

Some EAs and indicators sometimes throw up figures that are off by one or two decimal places. Is there some facility that can be included in code to auto-correct decimal issues with JPY, XAU, XAG etc.?
  • #3,563
  • Edited 7:17pm Jan 22, 2014 10:26am | Edited 7:17pm
I have a request for a script that may have already been done, but I have searched high and low no luck.

This example is for a BUY order but would be the reverse for a Sell order:

When I place a Buy order, I need the StopLoss to be placed underneath the last closed bar plus spread. I need for the script to calculate that StopLoss amount compared to the ENTRY price and place the TakeProfit at 1:1 1:2, etc.. I want to be able to determine in the "settings" what the R/R ratio will be manually ahead of time.

This way I can place my trade and walk away.

An audible alarm that signals the trade has been completed - win or lose - would be nice, too.

Thanks for any guidance or direction.

P.S. If I was really bold, I might ask that this script could be placed before the current/trigger bar even closes... that would be the ultimate

THANK YOU!

Edit: I have found exactly what I am looking for. All I need now is to be able to set the stoploss off the bottom of the last closed candle as apposed to the last fractal It would be nice to have that input field added in addition to the way it is set up now so I have the option of either using the fractal or the last bar. I hope I am making it clear.

THANK YOU!
Attached File(s)
File Type: mq4 XIT_BuySellAutoStoploss.mq4   10 KB | 618 downloads
  • #3,564
  • Jan 22, 2014 12:14pm Jan 22, 2014 12:14pm
Good Morning,
Wondering if someone can help me out.
I have been using the very useful attached script in my trading.
I would really like for a few key actions to be added to it if someone with coding skills wouldn't mind?
1. I would like the pending orders to expire after a chosen period. This could either be done via an input at time of placing or by me changing some code and saving with a different name each time. My coding is so basic i can just about amend the code at the start which changes lot sizes etc!
2. Based on the time frame i set i would like the comments field to be populated with the title of the script plus the set expiration timeframe.
3. Once the orders have expired then all objects should also be removed. In fact, i am not so bothered about the arrows etc been on from the start, can they be removed from even been placed?
I understand this is work for someone for nothing in return so if you can help me out on that basis i would be really grateful!
Shout if anyone has any questions, thanks in advance.
Attached File(s)
File Type: mq4 30 x 60 x 0.01.mq4   7 KB | 550 downloads
  • #3,565
  • Edited 3:50pm Jan 22, 2014 3:32pm | Edited 3:50pm
Quoting fairwind
Greetings to all programmers .... I am not a programmer and have used this magnificent thread a couple of times and thoroughly appreciate the effort of all who create programs. My current request ( challenge? ) is for a script that will turn on/off "autoscroll" to all charts. How will I use this, if available? I spend a lot of time manually backtesting trade setup idea's which puts the current PA out of view. To check all my charts for current PA, I am currently clicking each chart of my 18 pairs. Very laborious. I hope my explanation is clear and...
FW,

There's no command in the MQL4 programming language that allows toggling of autoscroll.

However, here is a workaround:
--- You could turn autoscroll on, on every chart, and save this as a MT4 profile (menu option: File....Profiles....Save As).
--- Then turn autoscroll off, on every chart, and save that as another profile.
After that one-time setup job, all you'd need to do is press Ctrl-F5/Shift-F5, to toggle between the two profiles.

David

[Note to anybody who might be interested: The status/value of every item on each chart, for a given profile, is stored in files (chart01.chr, chart02.chr, etc) in the ....(MT4)/profiles/[profile name] folder. For example, in each of these files there's an entry scroll=n (n=1 denotes on; n=0 denotes off) which stores the status of autoscroll while MT4 is not running. Then when MT4 is restarted, all of the setting values from these files are loaded, allowing MT4 to pick up exactly from where it left off when it was last exited.]
  • #3,566
  • Jan 22, 2014 4:42pm Jan 22, 2014 4:42pm
Hi Traders and Experts..
kindly please could someone tell me what is the best indicator or EA for market entry?
  • #3,567
  • Jan 23, 2014 2:53am Jan 23, 2014 2:53am
Can someone help write an expert?
http://www.forexfactory.com/showthread.php?p=6735267 # post6735267
myfxbook.com/portfolio/profit-non-stop/526132
forexsystems.ru/sovetniki/70763-russkaya-sistema-280.html # post626659
forexsystems.ru/627191-post5643.html
forexsystems.ru/628222-post5780.html
  • #3,568
  • Jan 23, 2014 12:57pm Jan 23, 2014 12:57pm
Quoting FoggyBottom
Edit: I have found exactly what I am looking for. All I need now is to be able to set the stoploss off the bottom of the last closed candle as apposed to the last fractal It would be nice to have that input field added in addition to the way it is set up now so I have the option of either using the fractal or the last bar. I hope I am making it clear. THANK YOU! {file}
Hi FoggyBottom, that script looks like it be of some use to me, as a total newbie to this could I ask what the inputs in your script do. I understand risk reward eg if both set to 1 that would be 1:1 etc but I dont know what,
stopadd
Maxslip
Maxspread
Magic
are for, any help would be great.
Thanks
  • #3,569
  • Jan 23, 2014 10:30pm Jan 23, 2014 10:30pm
Is there any ea for open pending order every 10-12 pip step on any direction with sl and tp?
  • #3,570
  • Edited 12:05am Jan 24, 2014 12:04am | Edited 12:05am
Thanks Hanover

Re: "There's no command in the MQL4 programming language that allows toggling of autoscroll."

.... and for the work around in post 3565

David aka fairwind
Good Trading to All ---- fairwind
  • #3,571
  • Jan 24, 2014 10:04am Jan 24, 2014 10:04am
Quoting Next4467
{quote} Hi FoggyBottom, that script looks like it be of some use to me, as a total newbie to this could I ask what the inputs in your script do. I understand risk reward eg if both set to 1 that would be 1:1 etc but I dont know what, stopadd Maxslip Maxspread Magic are for, any help would be great. Thanks
Go here... http://codebase.mql4.com/7274

It will explain what all the inputs are for. It is actually a really nice script. Hope this helps
  • #3,572
  • Edited 4:46pm Jan 24, 2014 12:24pm | Edited 4:46pm
Attached File(s)
File Type: mq4 PDT.mq4   17 KB | 688 downloads
Attached File(s)
File Type: ex4 PDT.ex4   14 KB | 544 downloads
Hello,

Thank you for helping me to transform this indicator into EA
The purpose is to buy when the arrow blue appears and to sell when it is red
With the possibility of modifying manually the following parameters:
Min Range
Max Range
And putting TakeProfit, StopLoss, TrailingStop
Thank you very much
  • #3,573
  • Jan 24, 2014 2:09pm Jan 24, 2014 2:09pm
hello
first of all thanks a lot for your effort
and i do have a request here that i hope you can assist me with
th idea that i am looking is for an EA that follows these Steps
note: i m working with 2 indicators which are B bands stop bar and RSI filter

i would like the EA to start an order (Entry point) either buy or sell when both indicators signal buy or sell, and to close the order right away (take profit) when one of the indicators changes signals

Also i would like the EA to have the following options

1- to work with Renko candles
2- before starting it to give me the option to choose wether i would like to work with both indicators or just one

3- i would like be able to set the lot value before it starts

4- i would like to begin trading using 5 lots
5- if any of the lots (lot1- lot 2-lot 3-lot 4- lot 5) got some profit start again from lot 1
6- if case of loss continue trading up to lot 5, then start again with lot 1
example : trade 1 lot 1 lost start trade 2 lot 2, if trade 2 lot 2 lost start trade 3 lot 3, and so on till it reaches lot 5
if any of the lots 2-5 won, start again from lot 1

Finally i will attach the files required to help more
Attached Image(s) (click to enlarge)
Click to Enlarge Name: 2.jpg Size: 66 KB
Click to Enlarge Name: 11.jpg Size: 92 KB
Attached File(s)
File Type: tpl Copy of ttt.tpl   15 KB | 440 downloads
File Type: mq4 RSIFilter_v1.mq4   2 KB | 531 downloads
File Type: ex4 BBands_Stop_v1_BAR.ex4   7 KB | 504 downloads
  • #3,574
  • Jan 24, 2014 4:35pm Jan 24, 2014 4:35pm
Greetings

Can somebody assist me please with placing an SMS alert in the code for the indicator supplied below?
At this stage I would only want alerts for the major pairs ie. GBPUSD, EURUSD, USDCHF, USDCAD, USDJPY, AUDUSD, & NZDUSD, and only on Daily and H4 timeframes.

Attached File(s)
File Type: mq4 Candle Pivot.mq4   3 KB | 575 downloads


Many thanks in advance

Graham
  • #3,575
  • Edited 7:10am Jan 25, 2014 5:22am | Edited 7:10am
Can someone please make this reversal pattern with an arrow on the close of the third bar?

Quote
According to Alton Hill, three-bar reversals are too common in intraday time-frames. To select the best three-bar reversal patterns for day trading, he wants the third bar in the pattern to close above the highs of the first two bars.

RULES FOR LONG

  1. Bar 1 closes down
  2. Low of Bar 2 is below low of Bar 1 (and Bar 3)
  3. Bar 3 closes above the high of both Bar 1 and Bar 2
  4. Buy at close of Bar 3

RULES FOR SHORT

  1. Bar 1 closes up
  2. High of Bar 2 is above high of Bar 1 (and Bar 3)
  3. Bar 3 closes below the low of both Bar 1 and Bar 2
  4. Sell at close of Bar 3

http://www.tradingsetupsreview.com/t...n-day-trading/

Attached Image (click to enlarge)
Click to Enlarge Name: Three-Bar-Reversal-Pattern-For-Day-Trading.png Size: 15 KB


Would appreciate anyone having a go
  • #3,576
  • Jan 25, 2014 8:15am Jan 25, 2014 8:15am
Quoting costadelsol
{file}{file}Hello, Thank you for helping me to transform this indicator into EA The purpose is to buy when the arrow blue appears and to sell when it is red With the possibility of modifying manually the following parameters: Min Range Max Range And putting TakeProfit, StopLoss, TrailingStop Thank you very much
hi

nice indicator, is there more info about this indicator, what pairs, time frames, settings??

kind regards
morne
  • #3,577
  • Jan 25, 2014 6:53pm Jan 25, 2014 6:53pm
Hi guys, can someone help me code a simple rule in an Ea, pls.

Attached File(s)
File Type: mq4 universalMACrossEA.mq4   33 KB | 534 downloads


I need coded a money management rule so that after each lost trade it calculates how many lots are needed to regain that loss based on the equity it had before the loss and the curreent equity, and open the next trade with that amount of lots. But in such a way that the current money management code still works as it should.

or
based on an external imput that we can set in pips, for ex. 5 pips profit. how many lots are needed to regain the loss in those 5 pips.

Im sorry for my bad english.

Thanks in advance,
"The trend is your friend, until the end, when it bends"
  • #3,578
  • Jan 26, 2014 5:11am Jan 26, 2014 5:11am
Quoting FoggyBottom
{quote} Go here... http://codebase.mql4.com/7274 It will explain what all the inputs are for. It is actually a really nice script. Hope this helps
Thanks.
  • #3,579
  • Jan 26, 2014 7:52am Jan 26, 2014 7:52am
Quoting ReyesWhite
Can someone please make this reversal pattern with an arrow on the close of the third bar? {quote} RULES FOR LONG Bar 1 closes down Low of Bar 2 is below low of Bar 1 (and Bar 3) Bar 3 closes above the high of both Bar 1 and Bar 2 Buy at close of Bar 3 RULES FOR SHORT Bar 1 closes up High of Bar 2 is above high of Bar 1 (and Bar 3) Bar 3 closes below the low of both Bar 1 and Bar 2 Sell at close of Bar 3 http://www.tradingsetupsreview.com/t...n-day-trading/ {image} Would appreciate anyone having a go

Try this, I just changed another existing indicator
Attached File(s)
File Type: ex4 Three_Bar_Reversal.ex4   5 KB | 604 downloads
File Type: mq4 Three_Bar_Reversal.mq4   4 KB | 826 downloads
  • #3,580
  • Jan 26, 2014 10:35am Jan 26, 2014 10:35am
Hi,

Can someone please create the indicator for the sigmaspike indicator explained below:

SigmaSpikes is a tool to express each bar’s return against a volatility-adjusted baseline, as a standard deviation of the last 20 bars’ returns. This highlights significant moves that might or might not be apparent based on visual chart inspection. It is also a useful tool for traders monitoring many markets on a daily basis, as measurements under, say, 1.5 or 2.0 on this tool can usually be considered normal fluctuations, and very large readings will demand immediate attention. It is important to note that, though this measure uses standard deviations, no claim is being made that the data follows a normal distribution. This means that the standard statistical rules of thumb (e.g., roughly 95% of values are within +/- 2.0 standard deviations) do not apply to this tool.

There is a blog post called Chart of the Day: Breakout in the S&P and also Chart of the Day: Gold which explains more about it with a chart.

Thanks
200 traders viewing now