I will code your EAs and Indicators for no charge | Page 88 | Crypto Craft

Options

Go to
Permalinks
Print Thread

Similar Threads

I will code your pivot EAs for no charge 28 replies

I will code your scalping EAs for no charge 163 replies

Oanda MT4 - Indicators and EAs not showing 2 replies

EAs and indicators relating to moutaki... 22 replies

InterbankFX has loaded its MT4 platform with custom EAs, indicators and scripts 1 reply

Attachments: I will code your EAs and Indicators for no charge
Exit Attachments

I will code your EAs and Indicators for no charge

  • #1,741
  • Feb 28, 2013 3:42pm Feb 28, 2013 3:42pm
Quoting forexvegan
Hi Kis,

Okay I am getting the message that it should be closed. Can we start putting the EA together, and I can do further testing? Some features that would be nice is to select a specific currency, if left blank it does all, magic number if I just want the EA, if left blank it trades all, and minutes included so I don't have to wait a full hour if I am just doing testing or need 1.5 hours. If this is not possible no problem, I am excited that you are helping me this much. Do you think I can get a copy of the mq4 file nce we are all done with...
OK, I made some quick changes, I don't have time now for more.
EA should now close positions (so test only demo), and hours are changed to minutes. (so put 60 for 1 hour).
I can add the Magic number filter and the currency pair filter later, if current code works fine. Please check Experts log for error codes, if there is any.

And one thing, please try to make messages more readable, like:

/-------------------
Some features that would be nice is:
1. to select a specific currency, if left blank it does all,
2. magic number if I just want the EA, if left blank it trades all,
3. and minutes included so I don't have to wait a full hour if I am just doing testing or need 1.5 hours.
/-------------------

It would be easier to understand what would you like.

And of course, I'll give you the code, just finish testing first.
Attached File(s)
File Type: ex4 pip_minute_limit_close_no_magic.ex4   3 KB | 463 downloads
Keep It Simple
  • #1,742
  • Feb 28, 2013 4:10pm Feb 28, 2013 4:10pm
Quoting mpradeep
Brother I checked in M1tf it automatic put Tp amd sl. It should not be like that if i dont use sl or tp. It should be closed when fisher either touch 0 or colour change. I am agary with ur pic what u send in colour change. Actually it should exit at 0. Please check it.
it took order in m1 ej at 120.74 showing sl 120.84 and tp 120.74 .
Ok. Please tell me priorities:

1. Fisher color change is more important than the TP you set? In the last version TP had priority. In the attached version, position will be closed if fisher change color before TP is hit. If TP is not set, position will be only closed on fisher change.

2. SL: should be what you set OR bollinger? In the last and current version, if you leave SL=0, SL will be set to bollinger indicator level. Your SL has priority.
Attached File(s)
File Type: ex4 SWING_mpradeep.ex4   8 KB | 442 downloads
Keep It Simple
  • #1,743
  • Feb 28, 2013 4:21pm Feb 28, 2013 4:21pm
Quoting skld
i probably found a problem in swap

thera is a string

if (MarketInfo(Symbol(), MODE_SWAPLONG) > 0) BuyOp=true;


atm i have swap long -0.1 at one broker and i have
swap long 0.0 with another for a long time


can you help me please to found strings with explain how SWAPLONG calculating?

-----
SWING ea make some profit on demo
wishlist: some mm and can you put version numbers near ea.
thank you for help
I'm not sure, what you want.
Quote
if (MarketInfo(Symbol(), MODE_SWAPLONG) > 0) BuyOp=true;
means that variable BuyOp will be true only if SWAP for Long positions is positive. So if BuyOp=true is a condition to open position, position will be not opened if SWAP for long positions is 0 or negative.
Keep It Simple
  • #1,744
  • Feb 28, 2013 7:37pm Feb 28, 2013 7:37pm
Quoting kis
I'm not sure, what you want. means that variable BuyOp will be true only if SWAP for Long positions is positive. So if BuyOp=true is a condition to open position, position will be not opened if SWAP for long positions is 0 or negative.
ye thats how it must work

but now i have swap long=0 for a lot of time on live (2weeks)


and i lf help to understand why its 0 on my main brocker and not zero on other


may be we can modify this string to calculate swap in other way?

thanks

http://www.forexfactory.com/showthread.php?t=137707
  • #1,745
  • Feb 28, 2013 8:22pm Feb 28, 2013 8:22pm
Any body has script to close the last order. May be there two separate scripts one is for buy and second is for sell orders.
  • #1,746
  • Feb 28, 2013 11:44pm Feb 28, 2013 11:44pm
Quoting kis
Ok. Please tell me priorities:

1. Fisher color change is more important than the TP you set? In the last version TP had priority. In the attached version, position will be closed if fisher change color before TP is hit. If TP is not set, position will be only closed on fisher change.

2. SL: should be what you set OR bollinger? In the last and current version, if you leave SL=0, SL will be set to bollinger indicator level. Your SL has priority.
Brother whole night i run both Ea in 5 chart in H1 tf. Both Ea means first verson and last verson. Morning i saw it closed randomly in loss. In first verson i have given defult setting tp10 sl 100 where as i set last verson tp10 and sl 200. May be it closed because bollinger band sl.

Also what i saw last verson if i dont give tp sl means if both 0 thn it automatic take tp is same as buy and sl is 10 pips.

Ok to clear confusion lets make things more clear.

Please make the Ea entry as per the rule which is fine exit is when fisher touch 0 not colour change. Tp should be given first priority. If tp trigered again it should take order if condition are match. If tp not given than it should close when fisher touch 0.

I am sorry giving you more trouble and thank you very much making the Ea in my name.

God bless you
  • #1,747
  • Mar 1, 2013 4:56am Mar 1, 2013 4:56am
Quoting 786 trading
Any body has script to close the last order. May be there two separate scripts one is for buy and second is for sell orders.
You can find here some scripts, inclusive the ones you want. http://think-trust-trade.com/index.p...ee-mt4-scripts
Keep It Simple
  • #1,748
  • Mar 1, 2013 5:09am Mar 1, 2013 5:09am
Quoting skld
ye thats how it must work

but now i have swap long=0 for a lot of time on live (2weeks)


and i lf help to understand why its 0 on my main brocker and not zero on other
Because different brokers offer different SWAP rates.
Check a different brokers swap here: http://think-trust-trade.com/index.p...ad-comparation


Quote
may be we can modify this string to calculate swap in other way?

Quote
if (MarketInfo(Symbol(), MODE_SWAPLONG) > 0) BuyOp=true;
This simply returns the SWAP offered by your broker. If you want position on 0 SWAP as well, try this: if (MarketInfo(Symbol(), MODE_SWAPLONG) >= 0) BuyOp=true;

OR do you want positions opened regardless what is the SWAP?
Keep It Simple
  • #1,749
  • Mar 1, 2013 5:37am Mar 1, 2013 5:37am
Quoting mpradeep
Brother whole night i run both Ea in 5 chart in H1 tf. Both Ea means first verson and last verson. Morning i saw it closed randomly in loss. In first verson i have given defult setting tp10 sl 100 where as i set last verson tp10 and sl 200. May be it closed because bollinger band sl.
If you set SL, your SL is not updated by EA to bollinger SL. Positions might have been closed on fisher 0.

Quote
Also what i saw last verson if i dont give tp sl means if both 0 thn it automatic take tp is same as buy and sl is 10 pips.

Ok to clear confusion lets make things more clear.

Please make the Ea entry as per the rule which is fine exit is when fisher touch 0 not colour change. Tp should be given first priority. If tp trigered again it should take order if condition are match. If tp not given than it should close when fisher touch 0.

Attached version: SWING_mpradeep_v1.0.ex4 should work like:

TP has priority.
1. If TP is set, position will be closed on TP or SL.
2. If TP is not set, position will be closed on SL or Fisher 0. If Fisher is 0 before SL, position will be closed. Should SL have priority over Fisher change as well?
3. If SL is not set, SL will be set to bollinger level.

Quote
I am sorry giving you more trouble and thank you very much making the Ea in my name.

God bless you
Welcome.
Attached File(s)
File Type: ex4 SWING_mpradeep_v1.0.ex4   8 KB | 499 downloads
Keep It Simple
  • #1,750
  • Mar 1, 2013 9:41am Mar 1, 2013 9:41am
Quoting kis
You can find here some scripts, inclusive the ones you want. http://think-trust-trade.com/index.p...ee-mt4-scripts
Thanks.
  • #1,751
  • Mar 1, 2013 9:44am Mar 1, 2013 9:44am
Quoting 786 trading
Thanks.
Welcome.
Keep It Simple
  • #1,752
  • Mar 1, 2013 9:51am Mar 1, 2013 9:51am
Quoting kis
If you set SL, your SL is not updated by EA to bollinger SL. Positions might have been closed on fisher 0.



Attached version: SWING_mpradeep_v1.0.ex4 should work like:

TP has priority.
1. If TP is set, position will be closed on TP or SL.
2. If TP is not set, position will be closed on SL or Fisher 0. If Fisher is 0 before SL, position will be closed. Should SL have priority over Fisher change as well?
3. If SL is not set, SL will be set to bollinger level.

Welcome.
Brother just now i came and i willtry this new verson and let you know the result, but what I say your first verson is working fine in order taking.Please just add exit to that first Ea. Exit should be first priority on TP or SL if tp is 0 thn should exit on fisher 0.
  • #1,753
  • Mar 1, 2013 9:59am Mar 1, 2013 9:59am
Quoting kis
If you set SL, your SL is not updated by EA to bollinger SL. Positions might have been closed on fisher 0.



Attached version: SWING_mpradeep_v1.0.ex4 should work like:

TP has priority.
1. If TP is set, position will be closed on TP or SL.
2. If TP is not set, position will be closed on SL or Fisher 0. If Fisher is 0 before SL, position will be closed. Should SL have priority over Fisher change as well?
3. If SL is not set, SL will be set to bollinger level.

Welcome.
Ohh brother i just put it on eu5 mit chart defult setting but it give sl at 15 pips. When sl and tp should be 0 it should not give sl exit should be at fisher 0. Please chk tht
  • #1,754
  • Mar 1, 2013 10:02am Mar 1, 2013 10:02am
Quoting kis
If you set SL, your SL is not updated by EA to bollinger SL. Positions might have been closed on fisher 0.



Attached version: SWING_mpradeep_v1.0.ex4 should work like:

TP has priority.
1. If TP is set, position will be closed on TP or SL.
2. If TP is not set, position will be closed on SL or Fisher 0. If Fisher is 0 before SL, position will be closed. Should SL have priority over Fisher change as well?
3. If SL is not set, SL will be set to bollinger level.

Welcome.
I think it is automatic setting sl to bolinger level. Please remove that part. it should be if sl tp 0 thn exit only at fisher 0
  • #1,755
  • Mar 1, 2013 10:33am Mar 1, 2013 10:33am
Quoting mpradeep
I think it is automatic setting sl to bolinger level. Please remove that part. it should be if sl tp 0 thn exit only at fisher 0
Fisher 0 has priority over SL. So if you don't want to have SL set and also don't want to have bollinger set SL, you can set SL 2000 pips or some really high SL. That is almost like you wouldn't set SL. But if you still want, I can remove it...
Keep It Simple
  • #1,756
  • Mar 1, 2013 10:40am Mar 1, 2013 10:40am
Requesting Horizontal Line that shows last CLOSED order ( INDI ) in chart for all timeframes. Indi must place horizontal line to chart after order was CLOSED.

Or somebody got it ?

Please help.
  • #1,757
  • Mar 1, 2013 11:15am Mar 1, 2013 11:15am
Quoting thank you
Requesting Horizontal Line that shows last CLOSED order ( INDI ) in chart for all timeframes. Indi must place horizontal line to chart after order was CLOSED.

Or somebody got it ?

Please help.
Check the attached, but please tell me, why you need this?
Attached File(s)
File Type: ex4 LastClosedOrderLevel.ex4   2 KB | 447 downloads
Keep It Simple
  • #1,758
  • Mar 1, 2013 11:24am Mar 1, 2013 11:24am
Sir , thank you so much, that is perfect, that is exactly what I was looking for. Is it possible to change color of line ( somehow ) or put it to inputs ? Is it possible made input for this indi for last let's say 2 or .... 5 last Closed orders with diff color for each closed order ? Can you made also input to show if order was buy or sell on the top of line ?
Thank you
I need it , because I'm using buy sell real strategy in real trading, and believe me , it's profitable.
  • #1,759
  • Mar 1, 2013 11:45am Mar 1, 2013 11:45am
Quoting kis
Fisher 0 has priority over SL. So if you don't want to have SL set and also don't want to have bollinger set SL, you can set SL 2000 pips or some really high SL. That is almost like you wouldn't set SL. But if you still want, I can remove it...
I will tell you after testing one day. Hope this verson is ok but I will report u later. Good job.
  • #1,760
  • Mar 1, 2013 12:41pm Mar 1, 2013 12:41pm
Quoting thank you
Sir , thank you so much, that is perfect, that is exactly what I was looking for. Is it possible to change color of line ( somehow ) or put it to inputs ? Is it possible made input for this indi for last let's say 2 or .... 5 last Closed orders with diff color for each closed order ? Can you made also input to show if order was buy or sell on the top of line ?
Thank you
I need it , because I'm using buy sell real strategy in real trading, and believe me , it's profitable.
I'll take a look, if I'll have some time in the weekend.
Keep It Simple
176 traders viewing now