I will code your EAs and Indicators for no charge | Page 4086 | Crypto Craft

Options

Go to
Permalinks
Print Thread

Similar Threads

I will code your pivot EAs for no charge 28 replies

I will code your scalping EAs for no charge 163 replies

Oanda MT4 - Indicators and EAs not showing 2 replies

EAs and indicators relating to moutaki... 22 replies

InterbankFX has loaded its MT4 platform with custom EAs, indicators and scripts 1 reply

Attachments: I will code your EAs and Indicators for no charge
Exit Attachments

I will code your EAs and Indicators for no charge

  • #81,701
  • Apr 23, 2026 1:47am Apr 23, 2026 1:47am
Dear Coders,

Is there a Coder who can add the following to the attached EA?

A start time plus an end time setting in hours and minutes.

And if it’s not too much to ask, then preferably the end time optimizable.

I tried it myself but I got 18 errors and a lot of warnings.

I would be very grateful.
Attached File(s)
File Type: mq4 T.E.rev.ea.mq4   12 KB | 112 downloads
  • #81,702
  • Edited 2:46am Apr 23, 2026 2:34am | Edited 2:46am
Quoting Sagat1977
{quote} {file} {file} {image} {image} MT4 / MT5 Indicator Issue Hi, I'm referring to an MT4 and MT5 indicator that draws horizontal boxes (with solid/dash style switching). The MT5 version works perfectly. The solid dashed box style switching works fine. On MT5 the boxes stop correctly and do not extend all the way to the right edge of the chart — this is the desired behavior. The first screenshot shows the perfect result. The second screenshot shows the problem: the boxes extend all the way to the right side (to the end of the...
Explain it exactly the same way to your AI and ask it to correct it.
However, make it very clear what you expect as the final result.
It looks to me like the AI got TIME1 and TIME2 the opposite way in the rectangles.
So, it's an indexing confusion - typical for AI.
.ex4/.ex5 files can't be fixed or modified / I'm not a coder!
  • #81,703
  • Apr 23, 2026 2:56am Apr 23, 2026 2:56am
Quoting BestTraderEv
{quote} Explain it exactly the same way to your AI and ask it to correct it. However, make it very clear what you expect as the final result. It looks to me like the AI got TIME1 and TIME2 the opposite way in the rectangles. So, it's an indexing confusion - typical for AI.
"I opened a new chat window. Another AI managed to do it."
very good indicator!
Attached File(s)
File Type: mq4 KK_Fvg_MTF_MT4.mq4   14 KB | 243 downloads
  • #81,704
  • Apr 23, 2026 3:56am Apr 23, 2026 3:56am
Quoting Sagat1977
{quote} "I opened a new chat window. Another AI managed to do it." very good indicator! {file}
OBJ_RECTANGLE
MQL4 OBJPROP_BACK = true -> rectangle in background and filled with color
MQL5 OBJPROP_BACK = true -> rectangle in background
MQL5 OBJPROP_FILL = true -> rectangle filled with color
.ex4/.ex5 files can't be fixed or modified / I'm not a coder!
  • #81,705
  • Apr 23, 2026 6:14am Apr 23, 2026 6:14am
Quoting antny
good day, could you code a 4 sma with offset of +1, however would like an alarm or notice when candle stick crosses and closes on/over the 4sma. {image} {image} please advise, if you feel a better idea for this simple ma. Thank you in advacne
В разделе профит надо выставить цену закрытия всеволишь, этот код по дефолту работает всеволишь с нулем.
  • #81,706
  • Edited 6:35am Apr 23, 2026 6:17am | Edited 6:35am
Quoting sagat1977
{quote} "i opened a new chat window. Another ai managed to do it." Very good indicator! {file}
Sagat1977 Ценю вас но и ваш индикатор работает на истории он прекрасен чес но но это история ,а не сейчас именно в эту минуту.
Если честно я его уже разделил как вы его в первые дни его выхода и публикацыи , те кто уровни кушают то да но всеже.
Я не настаиваю не на чем , я просто предлагаю свое, всем профит парни и спасибо за ваши идеи.
  • #81,707
  • Apr 23, 2026 6:50am Apr 23, 2026 6:50am
I have a question: What causes the indicator buffer not to draw/update after being left idle for a while?
The indicator buffer will draw/update after we right-click, select indicator properties, and then click OK.
  • #81,708
  • Apr 23, 2026 8:33am Apr 23, 2026 8:33am
Quoting Q_Mouze
I have a question: What causes the indicator buffer not to draw/update after being left idle for a while? The indicator buffer will draw/update after we right-click, select indicator properties, and then click OK.
Most likely wrong indexing logic for the for() loop.
We don't want to recalculate every bar on every tick, that's why we need to calculate the historical bars only once and then store the data in the buffers. And then we only want to recalculate as many bars as necessary.
That's where the bug is, most likely.
.ex4/.ex5 files can't be fixed or modified / I'm not a coder!
  • #81,709
  • Apr 23, 2026 8:37am Apr 23, 2026 8:37am
Quoting Tictak
{quote} Sagat1977 Ценю вас но и ваш индикатор работает на истории он прекрасен чес но но это история...
An FVG requires at least 2 closed bars (depending on the formula).
So, if anybody wants to trade FVGs, they need to use HTF FVGs on LTFs.
Historical FVGs may be useful or not - obviously, the price has no obligation to respect any FVG...
.ex4/.ex5 files can't be fixed or modified / I'm not a coder!
  • #81,710
  • Apr 23, 2026 9:52am Apr 23, 2026 9:52am
Quoting tintep
{quote} Hi tonyjustcom I use for divergence from vPOC and tPOC . you can lead post 81,611 from BestTradeEv . 1. "vPOC_tPOC_vWAP_LR-Session" you can try this version I use session vWAP on right and day vWAP on left you can choose from input "input bool InpCumulativeMode = true; //true= cumalative || false = Daily Refresh" 2. "POC session" calculate POC from session 3. "POC4VA-AlertAllnoOB" same picture sorry for my English. {image} {file} {file} {file}
Thanks alot i truly appreciate your effort
i will check on it.
  • #81,711
  • Edited 1:22pm Apr 23, 2026 1:01pm | Edited 1:22pm
Quoting Tictak
{quote} Давай я тебе расскажу почему мне все равно на банковские уровни и я имел всю эту эффективность...
There is no valid closing logic for this, unless you are trading arbitrage for spread difference on various exchanges.
A different ballgame alltogether.
That's not trading charts, and also not technical trading, it's just pure price (Order Book) trading.
Quote
Anton Klevtsov is a trader who professionally specializes in scalping and arbitrage YouTube, and he works across NYSE, AMEX, NASDAQ, the Moscow Exchange and FORTS Mining-Bitcoin — so we're talking about cross-exchange arbitrage on stocks and futures, not forex.
He describes his approach as trading "market inefficiencies."
This completely reframes the original EA. The "right lock" the Russian-writing person is referring to is almost certainly Klevtsov's cross-exchange arbitrage technique — where the same instrument (or a closely correlated one) is traded simultaneously on two different exchanges, locking in the price discrepancy between them.
The key insight now is:

  1. The BUY leg goes on one exchange (e.g. Moscow Exchange)
  2. The SELL leg goes on another (e.g. NYSE or FORTS)
  3. The "lock" closes when the spread between the two feeds converges
  4. The martingale averaging makes sense here — if the spread temporarily widens, you average into it because convergence is structurally inevitable for the same underlying asset

The person who reimplemented it as a single-feed MT5 EA completely missed this — he built it as if both legs operate on the same price feed, which defeats the entire purpose.

.ex4/.ex5 files can't be fixed or modified / I'm not a coder!
  • #81,712
  • Apr 23, 2026 1:56pm Apr 23, 2026 1:56pm
Quoting Tictak
{quote} To be honest, I just lock them all in a tight, tight grip—I don't care where it goes, three points to the right or left, shoot 'em and cash in )) I'll tell you, Miss Tao'an isn't half bad at spotting trends and capitalizing on them, just so you know. https://www.youtube.com/watch?v=xRb5jBR2g30 Мис ThaoAnh я вас приветствую торкит.
The video title translates as "The Biggest Market Inefficiency in History. A $440 Million Mistake" — which is a reference to a famous real event, the Knight Capital Group incident of 2012, where a faulty algorithm caused $440 million in losses in 45 minutes due to a market inefficiency exploit gone wrong. That's a very well-known case study in arbitrage and HFT circles.
Now, regarding Klevtsov himself — the research reveals something important that you should know. The arbitrage opportunities he taught were largely specific to post-2022 Russian market isolation, where visible inefficiencies emerged between prices inside and outside the MOEX perimeter — spreads on gold, silver, and currency pairs that reached up to 6% at their peak. That window is now closing. Smart Lab
His actual toolkit is the order book (биржевой стакан), the tape of trades, and various arbitrage strategies. Klerk
However, there is also significant scepticism about him in Russian trading communities. Critics point out that the inefficiencies he now sells courses about no longer generate enough return to cover the cost of leverage — meaning the edge has already largely disappeared by the time retail traders learn about it. Smart Lab
So the honest conclusion is: the concept Klevtsov describes is real and legitimate. But the specific opportunities he built his reputation on were a product of a unique geopolitical moment in Russian markets that is unlikely to repeat.
.ex4/.ex5 files can't be fixed or modified / I'm not a coder!
  • #81,713
  • Apr 24, 2026 7:35am Apr 24, 2026 7:35am
Quoting BestTraderEv
{quote} This version will track until the end of day. Yes, a stop time can be added easily. However, what's the point of doing that? I mean, your idea, as I understand it, is to find HH and LL from a specific time to current bar, and then wait for a retracement to 50% or deeper, and go with the Fibo direction - correct? So, what is the purpose of any EndTime??? You can always input a new time, if needed, or even use more that one instance by changing the Fibonacci object name. {quote} There always is a way. OK now... needed to check the new functionalities!...

Hello BTE,

Actually, I'm looking for this type of Fibo, but with a stop time. I like to draw the fibo on some of the indices' M15 candles of open sessions only and trade the breakout/retracement during the next 60-120 min. Can you adjust the code, please, to make the following possible:

1- Have the option to draw fibo for any/all M15 open session candles (mainly, Frankfurt, London, and New York).
2- More flexible if it can be any candle of any time frame, with start/stop time (you already have start time, so you just need to add the stop time).
3- Lock that candle selected on all time frames so we can go to lower time frames to place orders based on the drawn fibo of the higher time frame (for example, place order on M1 and M5 TF of the fibos of the M15 open session candle).
4- Extend the fibo line right for max of 2 hours (maybe only 1 hrs for Frankfurt so it doesn't overlap London), or make this flexible per session.
5- Add the values of each level and possibly user comments at each level (can write entry/long/short/TP/SL at certain levels).
6- For backtesting, the possibility to draw for the previous number of days (say, 100 days).
7- Possibility of dragging the 0/100 fibo levels to open/close instead of only high/low only.
8- Add/remove fibo levels (which I think you already have).
9- To make it less complicated, maybe add a magic number to make it possible to add more than one indi for each session separately on the same instrument chart.

Thank you in advance!
  • #81,714
  • Apr 24, 2026 8:23am Apr 24, 2026 8:23am
Quoting sabbah
{quote} Hello BTE, Actually, I'm looking for this type of Fibo, but with a stop time. I like to draw the fibo on some of the indices' M15 candles of open sessions only and trade the breakout/retracement during the next 60-120 min. Can you adjust the code, please, to make the following possible: 1- Have the option to draw fibo for any/all M15 open session candles (mainly, Frankfurt, London, and New York). 2- More flexible if it can be any candle of any time frame, with start/stop time (you already have start time, so you just need to add the stop...
Ever heard of this one?
https://indicatorforest.com/items/fi...kout-indicator
.ex4/.ex5 files can't be fixed or modified / I'm not a coder!
  • #81,715
  • Apr 24, 2026 9:37am Apr 24, 2026 9:37am
Dear, Is it possible to turn the trend signal 2.31 MTF into an EA that opens a buy on the 30-minute chart ad the moment a buy is generated on the 4-hour chart? You would be doing me a great favor.
Attached File(s)
File Type: ex4 TrendSignal 2.31 mtf.ex4   36 KB | 158 downloads
  • #81,716
  • Apr 24, 2026 11:45am Apr 24, 2026 11:45am
Quoting BestTraderEv
{quote} Ever heard of this one? https://indicatorforest.com/items/fi...kout-indicator
I didn't. Thank you! I will check it now.
  • #81,717
  • Apr 24, 2026 11:46am Apr 24, 2026 11:46am
Quoting Cbeerthuizen
Dear, Is it possible to turn the trend signal 2.31 MTF into an EA that opens a buy on the 30-minute chart ad the moment a buy is generated on the 4-hour chart? You would be doing me a great favor. {file}
I suggest you stop wasting your time with EAs based on arrows.
They will never make you money, unless you want to sell them to other people...
This indicator also can not work, because arrows will appear and disappear.
And the EA will open trades when the arrow appears...
.ex4/.ex5 files can't be fixed or modified / I'm not a coder!
  • #81,718
  • Apr 24, 2026 1:38pm Apr 24, 2026 1:38pm
Quoting BestTraderEv
{quote} Ever heard of this one? https://indicatorforest.com/items/fi...kout-indicator
Works on forex, but not indices.
  • #81,719
  • Apr 24, 2026 2:01pm Apr 24, 2026 2:01pm
Quoting sabbah
{quote} Works on forex, but not indices.
Why are you telling me that???
I'm not your search engine.
If you can't use a search engine, ask an AI to find it for you.
.ex4/.ex5 files can't be fixed or modified / I'm not a coder!
  • #81,720
  • Apr 24, 2026 6:07pm Apr 24, 2026 6:07pm
Please test this forex indicator.

Timeframe: H1
Entry: Open of the candle
Exit: Close of the candle

Happy trading!
Attached Image (click to enlarge)
Click to Enlarge Name: screenshot.webp Size: 50 KB
Attached File(s)
File Type: ex5 Quantix FX.ex5   350 KB | 188 downloads
242 traders viewing now, 1 is registered: