I will code your EAs and Indicators for no charge

Quoting MwlRCT

Disliked

{quote} --- You are correct with regard to the old source code that you possess. Following the update, the 1.04 source code was not provided to you; only the .ex4 file was uploaded. The aforementioned screenshot originates from the old source code. Presented below is the actual 1.04 source code. Download 1.04: {file}

Ignored

Quoting walvekarraje

Disliked

1) Most of the cells are blank. They all should print "Up" or "Dn" as per relation of price with gann.

Ignored

Quoting walvekarraje

Disliked

2) On dashboard GBPUSD is indicating Dn when price is above gann. (Lb = 9 on both charts).

Ignored

Quoting MwlRCT

Disliked

{quote} --- You are correct with regard to the old source code that you possess. Following the update, the 1.04 source code was not provided to you; only the .ex4 file was uploaded. The aforementioned screenshot originates from the old source code. Presented below is the actual 1.04 source code. Download 1.04: {file}

Ignored

Quoting Tankk

Disliked

{quote} Recent SR v2_22 before putting induk on chart, we need to load bar's history using PageUp & Home keys.. induk has a lot of nested cycles: because of this, it can sometimes stumble in own calculations. to completely fix this problem, need to rewrite all main formulas, their structure. now i cleaned out all crap, improved some inputs blocks/calculations & made induk's work easier.. and now it works even in Strategy Tester... {file} {image} {image} Серая армия, рыжий...

Ignored

Quoting OutThere

Disliked

{quote} Idon't know how ppl can come to a decision to enter long or short using this indicator..but you've done a superb job fixing it.

Ignored

Quoting cja

Disliked

{quote} By default the Button can be dragged to any position on the chart however if a Manual Shift is preferred use the 2 Shift inputs. NOTE : As soon as a value is put into either of the 2 Shift inputs the default Button drag feature is disabled. NOTE: there is a Unique value input for the button when loading more than one indicator on the chart however if you leave the Unique value the same for any extra indicators loaded the single button will operate on all the indicators/timeframes instead of each indicator separately. NOTE : The name of this...

Ignored

Quoting sinohe6

Disliked

Hello master coders, I Try to create an expert with chatgpt that help to create push notification alert for indicators that .ex4 and alert not added in this indicators. I add this Ea to the chart that indicator without alert added to it. it works but not correctly, after the alert happened a box appeared and when click ok the alert generated!! ( alert not generated automatically ) would you please help to fix this Ea //+------------------------------------------------------------------+ //| Expert Advisor to Read EX4 Indicator and Generate...

Ignored

//+------------------------------------------------------------------+
//|                                             Indjuc Ex4 Alert.mq4 |
//|                                  Copyright 2025, MetaQuotes Ltd. |
//|                                             https://www.mql5.com |
//| Советник для чтения индикатора EX4 и генерации оповещений        |
//+------------------------------------------------------------------+
#property strict
// Входные параметры
input string IndicatorName = "Имя_индикатора.ex4"; // Имя файла индикатора EX4 (с расширением)
input int BufferIndex      = 0;      // Номер буфера индикатора, который нужно читать (mode)
input int AlertMode        = 1;      // 1: Оповещение, 2: Всплывающее сообщение, 3: Электронная почта
input bool EnableAlerts    = true;   // Включить стандартные оповещения (Alert)
input bool EnablePopup     = true;   // Включить всплывающее окно (MessageBox)
input bool EnablePush      = true;   // Включить Push-уведомления
input bool EnableEmail     = false;  // Включить отправку по электронной почте
input int shift            = 0;      // Сдвиг бара (0 – текущий бар, 1 – последний закрытый бар)
// Глобальная переменная для хранения предыдущего сигнала
double prevSignal = 0;
//+------------------------------------------------------------------+
//| Функция проверки сигнала от индикатора EX4                        |
//+------------------------------------------------------------------+
void CheckSignal()
{
   // Получаем значение из указанного буфера индикатора для бара с индексом shift.
   // Если индикатор не имеет входных параметров, то параметры идут сразу после имени индикатора.
   double ex4Value = iCustom(Symbol(), Period(), IndicatorName, BufferIndex, shift);
   
   // Если значение индикатора больше 0, а предыдущий сигнал был не положительным,
   // считаем, что сигнал только что появился.
   if(ex4Value > 0 && prevSignal <= 0)
   {
      string message = "Сигнал от " + IndicatorName + " обнаружен!";
      
      // Выбираем тип оповещения согласно AlertMode:
      if(AlertMode == 1 && EnableAlerts)
         Alert(message);
      else if(AlertMode == 2 && EnablePopup)
         MessageBox(message, "EX4 Signal Alert", MB_ICONINFORMATION);
      else if(AlertMode == 3 && EnableEmail)
         SendMail("EX4 Signal Alert", message);
      
      // Если включены Push-уведомления, отправляем их независимо от AlertMode
      if(EnablePush)
         SendNotification(message);
   }
   
   // Обновляем значение предыдущего сигнала, чтобы не генерировать повторные оповещения,
   // пока сигнал не изменится
   prevSignal = ex4Value;
}
//+------------------------------------------------------------------+
//| Функция инициализации советника                                   |
//+------------------------------------------------------------------+
int OnInit()
{
   Print("Советник для оповещений от индикатора ", IndicatorName, " инициализирован.");
   return(INIT_SUCCEEDED);
}
//+------------------------------------------------------------------+
//| Основная функция, выполняемая на каждом тике                        |
//+------------------------------------------------------------------+
void OnTick()
{
   CheckSignal();
}

Quoting Shargyn

Disliked

{quote} I haven’t checked it, check if you have anything. If it doesn't work, I'll fix it. Honestly, why do you need this? //+------------------------------------------------------------------+ //| Indjuc Ex4 Alert.mq4 | //| Copyright 2025, MetaQuotes Ltd. | //| https://www.mql5.com | //| Советник для чтения индикатора EX4 и генерации...

Ignored

Quoting sinohe6

Disliked

{quote} Thank you so much for quick reply bro, I check it but not working, would you please kindly fix it. I have Ma indicator that in .ex4 and the mql file not available, I want to generate a alert with this Ea bro {file}

Ignored

Quoting MwlRCT

Disliked

{quote} The EA is ready, i will upload only when you confirm below input if are correct as per your need. // Expected Behavior: // 1. The EA is attached to a chart (e.g., EURUSD, H1). // 2. Initially, no trade is managed (ticketNumber = -1), and the EA waits. // 3. The trader manually opens a BUY trade at 1.20000 with a lot size of 0.1. // 4. The EA detects the trade, assigns its ticket to ticketNumber, and: // - Calculates ATR (e.g., 0.0010), multiplies by 1.5 = 0.0015. // - Sets initial SL at 1.19850 (1.20000 - 0.0015). // - Prints: "Managing...

Ignored

Quoting sinohe6

Disliked

{quote} Thank you so much for quick reply bro, I check it but not working, would you please kindly fix it. I have Ma indicator that in .ex4 and the mql file not available, I want to generate a alert with this Ea bro {file}

Ignored

Quoting Shargyn

Disliked

{quote} You will need to write everything manually in the advisor code. Plus you need to specify the conditions for the signal, without this you won’t see anything. {image} {image}

Ignored

Quoting MwlRCT

Disliked

{quote} --- Noted: if (iTimePeriod == PERIOD_D1 && iShiftHours != 0) { // NOTE: start/end shift times for objects are used only error = GetShiftInfo(shift, startBarShift, endBarShift, timeStartObj, timeEndObj); } else { timeStartObj = iTime(NULL, iTimePeriod, shift); timeEndObj = iTime(NULL, iTimePeriod, shift) + (gRealTimePeriod * 60); } --- And if (TimeFrame == PERIOD_D1 && iShiftHours != 0) { // get start/end bar shift info // NOTE: time shift is not used in this function GetShiftInfo(Shift, startBarShift, endBarShift, startTimeShift, endTimeShift);...

Ignored

Quoting sinohe6

Disliked

{quote} bro when you change the line hist to true it changed like this, I'm not understand the coding but seems need to user buffer for alert changing the green to red or red to green mean signal alert generated the chatgbt code working and find the signal but I don't know why a box appeared when the signal generated and after press ok push notification send!! {image} {image} {image}

Ignored

Quoting cja

Disliked

{quote} By default the Button can be dragged to any position on the chart however if a Manual Shift is preferred use the 2 Shift inputs. NOTE : As soon as a value is put into either of the 2 Shift inputs the default Button drag feature is disabled. NOTE: there is a Unique value input for the button when loading more than one indicator on the chart however if you leave the Unique value the same for any extra indicators loaded the single button will operate on all the indicators/timeframes instead of each indicator separately. NOTE : The name of this...

Ignored

Quoting Mahapathy

Disliked

Dear Coders, Could any one help me to update the below indicator to increase the font size that displace in the chart for the fib values Thanks in advance {file}

Ignored

Quoting walvekarraje

Disliked

Even your pic shows so many blank cells.

Ignored