I will code your EAs and Indicators for no charge | Page 3751 | Crypto Craft

Options

Go to
Permalinks
Print Thread

Similar Threads

I will code your pivot EAs for no charge 28 replies

I will code your scalping EAs for no charge 163 replies

Oanda MT4 - Indicators and EAs not showing 2 replies

EAs and indicators relating to moutaki... 22 replies

InterbankFX has loaded its MT4 platform with custom EAs, indicators and scripts 1 reply

Attachments: I will code your EAs and Indicators for no charge
Exit Attachments

I will code your EAs and Indicators for no charge

  • #75,001
  • Feb 10, 2025 7:35pm Feb 10, 2025 7:35pm
Hello, is there a MT5 Supertrend EA I could get? Thank you.
  • #75,002
  • Feb 10, 2025 8:08pm Feb 10, 2025 8:08pm
Quoting sln
{quote} Hi BT, Just noticed the arrow indicator showing the beginning/end of trend.Any chance sharing that(default setting?) please
i downloaded the magicwaveBTEv but unable to see arrow setup in that.Any suggestions please?TIA
  • #75,003
  • Feb 10, 2025 10:44pm Feb 10, 2025 10:44pm
Dear Coders,

Appreciate your help to modify attached file on Fibo Expansion (FE) to suit below requirements as per attached picture. Current FE moved once it manually refreshed.
Requirements:
1. Line starts from "A" (same as Fibo Retracement), to "B" and "C". Only first Low and first High, wick to wick.
2. Drawn FE will stay there over a time. New FE on reversal side then shall be drawn.
3. Can make a selection on FE color and how many previous FE to display.
Attached Image (click to enlarge)
Click to Enlarge Name: FE 1.jpg Size: 73 KB

Attached File(s)
File Type: mq4 FE.mq4   8 KB | 302 downloads


Thanking you in advance...
  • #75,004
  • Feb 11, 2025 1:34am Feb 11, 2025 1:34am
hi, I'm looking for someone to help me automate my python code to mt5 code for trading NFP and CPI, it has a 100% success rate, I just need someone to help me finish it

from flask import Flask, request, jsonify
import MetaTrader5 as mt5
import threading
from pyngrok import ngrok
import tkinter as tk

app = Flask(__name__)

# Initialize MetaTrader 5
if not mt5.initialize():
print("initialize() failed, error code =", mt5.last_error())
quit()

def place_orders(symbol, lot, trades, pips_to_move, tp_pips, sl_pips, sl_enabled, distance_between_orders):
pip_size = 0.01 if symbol in ["GOLD", "GBPJPY", "EURCNY"] else 0.0001 # For GOLD, GBPJPY, EURCNY 1 pip = 0.01, for others 1 pip = 0.0001
deviation = 20

# Get the current price
symbol_info = mt5.symbol_info(symbol)
if symbol_info is None:
print(f"{symbol} not found, cannot proceed")
return

if not symbol_info.visible:
print(f"{symbol} is not visible, trying to switch on")
if not mt5.symbol_select(symbol, True):
print(f"symbol_select({symbol}) failed, exit")
return

price = mt5.symbol_info_tick(symbol).ask

for i in range(trades):
# Calculate Buy Stop and Sell Stop prices with distance between orders
buy_stop_price = price + (pips_to_move + i * distance_between_orders) * pip_size
sell_stop_price = price - (pips_to_move + i * distance_between_orders) * pip_size

# Calculate Take Profit and Stop Loss prices
tp_buy = buy_stop_price + tp_pips * pip_size
tp_sell = sell_stop_price - tp_pips * pip_size

# Prepare request for Buy Stop order
buy_stop_request = {
"action": mt5.TRADE_ACTION_PENDING,
"symbol": symbol,
"volume": lot,
"type": mt5.ORDER_TYPE_BUY_STOP,
"price": buy_stop_price,
"tp": tp_buy,
"deviation": deviation,
"magic": 234000,
"comment": "Buy Stop",
"type_time": mt5.ORDER_TIME_GTC,
"type_filling": mt5.ORDER_FILLING_FOK,
}
if sl_enabled:
sl_buy = buy_stop_price - sl_pips * pip_size
buy_stop_request["sl"] = sl_buy

# Prepare request for Sell Stop order
sell_stop_request = {
"action": mt5.TRADE_ACTION_PENDING,
"symbol": symbol,
"volume": lot,
"type": mt5.ORDER_TYPE_SELL_STOP,
"price": sell_stop_price,
"tp": tp_sell,
"deviation": deviation,
"magic": 234000,
"comment": "Sell Stop",
"type_time": mt5.ORDER_TIME_GTC,
"type_filling": mt5.ORDER_FILLING_FOK,
}
if sl_enabled:
sl_sell = sell_stop_price + sl_pips * pip_size
sell_stop_request["sl"] = sl_sell

# Send Buy Stop order
result = mt5.order_send(buy_stop_request)
if result.retcode != mt5.TRADE_RETCODE_DONE:
print(f"Buy Stop order failed, retcode = {result.retcode}")
continue

# Send Sell Stop order
result = mt5.order_send(sell_stop_request)
if result.retcode != mt5.TRADE_RETCODE_DONE:
print(f"Sell Stop order failed, retcode = {result.retcode}")
continue

def get_running_trades():
trades = mt5.positions_get()
if trades is None:
print("positions_get() failed, error code =", mt5.last_error())
return {}

trades_info = {}
for trade in trades:
symbol = trade.symbol
profit = trade.profit
if symbol in trades_info:
trades_info[symbol].append(profit)
else:
trades_info[symbol] = [profit]

return trades_info

def display_trades_info(trades_info):
for widget in trades_frame.winfo_children():
widget.destroy()

row = 0
for symbol, profits in trades_info.items():
tk.Label(trades_frame, text=symbol).grid(row=row, column=0, sticky="w")
tk.Label(trades_frame, text=f"Profits/Losses: {profits}").grid(row=row, column=1, sticky="w")
tk.Label(trades_frame, text=f"Total: {sum(profits):.2f}").grid(row=row, column=2, sticky="w")
row += 1

def update_running_trades():
trades_info = get_running_trades()
display_trades_info(trades_info)
root.after(5000, update_running_trades)

def close_all_trades():
trades = mt5.positions_get()
if trades is None:
print("positions_get() failed, error code =", mt5.last_error())
return

for trade in trades:
symbol = trade.symbol
ticket = trade.ticket
lot = trade.volume
price = mt5.symbol_info_tick(symbol).bid if trade.type == mt5.ORDER_TYPE_BUY else mt5.symbol_info_tick(symbol).ask

close_request = {
"action": mt5.TRADE_ACTION_DEAL,
"symbol": symbol,
"volume": lot,
"type": mt5.ORDER_TYPE_SELL if trade.type == mt5.ORDER_TYPE_BUY else mt5.ORDER_TYPE_BUY,
"position": ticket,
"price": price,
"deviation": 20,
"magic": 234000,
"comment": "Close Trade",
"type_time": mt5.ORDER_TIME_GTC,
"type_filling": mt5.ORDER_FILLING_FOK, # First attempt with FOK
}

result = mt5.order_send(close_request)
if result.retcode == mt5.TRADE_RETCODE_DONE:
continue

# If FOK fails, attempt IOC
close_request["type_filling"] = mt5.ORDER_FILLING_IOC
result = mt5.order_send(close_request)
if result.retcode != mt5.TRADE_RETCODE_DONE:
print(f"Close trade failed, retcode = {result.retcode}, result = {result}")
continue

print("All trades closed successfully")

def close_all_pending_orders():
orders = mt5.orders_get()
if orders is None:
print("orders_get() failed, error code =", mt5.last_error())
return

for order in orders:
close_request = {
"action": mt5.TRADE_ACTION_REMOVE,
"order": order.ticket,
"magic": 234000,
"comment": "Cancel Pending Order",
}

result = mt5.order_send(close_request)
if result.retcode != mt5.TRADE_RETCODE_DONE:
print(f"Close pending order failed, retcode = {result.retcode}")
continue

print("All pending orders canceled successfully")

def on_closing():
mt5.shutdown()
root.destroy()

def start_gui():
global root, trades_frame
root = tk.Tk()
root.title("MT5 Trading")

tk.Label(root, text="Symbol:").grid(row=0, column=0)
symbol_var = tk.StringVar(value="GOLD")
tk.OptionMenu(root, symbol_var, "GOLD", "NZDUSD", "GBPUSD", "EURUSD", "EURGBP", "USDCAD", "EURCAD", "GBPCAD", "GBPJPY", "USDCHF", "EURCNY", "AUDUSD").grid(row=0, column=1)

tk.Label(root, text="Number of Trades:").grid(row=1, column=0)
trades_entry = tk.Entry(root)
trades_entry.grid(row=1, column=1)

tk.Label(root, text="Lot Size:").grid(row=2, column=0)
lot_size_entry = tk.Entry(root)
lot_size_entry.grid(row=2, column=1)

tk.Label(root, text="Pips to Move:").grid(row=3, column=0)
pips_entry = tk.Entry(root)
pips_entry.grid(row=3, column=1)

tk.Label(root, text="Take Profit Pips:").grid(row=4, column=0)
tp_entry = tk.Entry(root)
tp_entry.grid(row=4, column=1)

tk.Label(root, text="Stop Loss Pips:").grid(row=5, column=0)
sl_entry = tk.Entry(root)
sl_entry.grid(row=5, column=1)

tk.Label(root, text="Distance Between Orders (pips):").grid(row=6, column=0)
distance_entry = tk.Entry(root)
distance_entry.grid(row=6, column=1)

sl_var = tk.BooleanVar()
sl_check = tk.Checkbutton(root, text="Activate Stop Loss", variable=sl_var)
sl_check.grid(row=7, column=0, columnspan=2)

tk.Button(root, text="Place Orders", command=lambda: place_orders(
symbol_var.get(), float(lot_size_entry.get()), int(trades_entry.get()),
float(pips_entry.get()), float(tp_entry.get()), float(sl_entry.get()), sl_var.get(), float(distance_entry.get())
)).grid(row=8, column=0, columnspan=2)
tk.Button(root, text="Get Running Trades", command=update_running_trades).grid(row=9, column=0, columnspan=2)
tk.Button(root, text="Close All Trades", command=close_all_trades).grid(row=10, column=0, columnspan=2)
tk.Button(root, text="Close All Pending Orders", command=close_all_pending_orders).grid(row=11, column=0, columnspan=2)

trades_frame = tk.Frame(root)
trades_frame.grid(row=12, column=0, columnspan=2, sticky="ew")

update_running_trades()

root.protocol("WM_DELETE_WINDOW", on_closing)
root.mainloop()

@app.route('/place_orders', methods=['POST'])
def place_orders_route():
data = request.json
symbol = data.get('symbol')
lot = data.get('lot')
trades = data.get('trades')
pips_to_move = data.get('pips_to_move')
tp_pips = data.get('tp_pips')
sl_pips = data.get('sl_pips')
sl_enabled = data.get('sl_enabled')
distance_between_orders = data.get('distance_between_orders')
place_orders(symbol, lot, trades, pips_to_move, tp_pips, sl_pips, sl_enabled, distance_between_orders)
return jsonify({"status": "success"})

@app.route('/get_running_trades', methods=['GET'])
def get_running_trades_route():
trades_info = get_running_trades()
return jsonify(trades_info)

@app.route('/close_all_trades', methods=['POST'])
def close_all_trades_route():
close_all_trades()
return jsonify({"status": "success"})

@app.route('/close_all_pending_orders', methods=['POST'])
def close_all_pending_orders_route():
close_all_pending_orders()
return jsonify({"status": "success"})

def run_flask():
app.run(port=5000)

if __name__ == '__main__':
# Run Flask in a separate thread
flask_thread = threading.Thread(target=run_flask)
flask_thread.start()

# Start the GUI
start_gui()
  • #75,005
  • Feb 11, 2025 3:31am Feb 11, 2025 3:31am
Quoting BestTraderEv
{quote} My version is for current timeframe. The version by @jblanked is for any timeframe. Which one you're going to use depends on what you want to achieve. You need to put this in a for() loop, because what is candle_size(2)? It's the body size of the candle with index 2. So, you are not comparing the correct candle bodies! In for() loop, you need something like: if( candle_size(i) < 3*candle_size(i+1) ) And, you need to do the same for all of your conditions.
Yes that's the problem, i see it now. Thanks for making that clear to me

Otherwise it will be the same value every time
Blindly following others will make you blind!
  • #75,006
  • Feb 11, 2025 4:01am Feb 11, 2025 4:01am
Quoting BestTraderEv
{quote} My version is for current timeframe. The version by @jblanked is for any timeframe. Which one you're going to use depends on what you want to achieve. You need to put this in a for() loop, because what is candle_size(2)? It's the body size of the candle with index 2. So, you are not comparing the correct candle bodies! In for() loop, you need something like: if( candle_size(i) < 3*candle_size(i+1) ) And, you need to do the same for all of your conditions.
So i have changed the code to this below, that should do the trick right?

Result is the same, maybe there something i don't understand about coding

Inserted Code
      for(int i = limit-1; i >=0; i--)
        {
        bool allwed = !usedatarange ?  Time[i] >= start_date && Time[i] <=end_date : true;
         if( allwed )
           {
            all++;
            double open1 = iOpen(Symbol(),tf,i+1);
            double open2 = iOpen(Symbol(),tf,i+2);
            double open3 = iOpen(Symbol(),tf,i+3);
            double high1 = iHigh(Symbol(),tf,i+1);
            double high2 = iHigh(Symbol(),tf,i+2);
            double high3 = iHigh(Symbol(),tf,i+3);
            double low1 = iLow(Symbol(),tf,i+1);
            double low2 = iLow(Symbol(),tf,i+2);
            double low3 = iLow(Symbol(),tf,i+3);
            double close1 = iClose(Symbol(),tf,i+1);
            double close2 = iClose(Symbol(),tf,i+2);
            double close3 = iClose(Symbol(),tf,i+3);
            //if(close2 < open2 && close1 > open1 && (close1-open1) > 2* (open2-close2) && open1<=close2) // Engulfing
            if((close2 < open2 && close1 > open1 && (close1-open1) < 3* (open2-close2) && open1 < low2 && low1 < low2 ) ||
            (close2 < open2 && close1 < open1 && (open1-close1) < 3* (open2-close2) && open1 > low2 && close1 > low2 && low1 < low2)) // Scenario 1 - 2 candle CRT
            
            if((close3 < open3 && close2 > open2 && (candle_size(2) < 3 * candle_size(3)) && open2 > low3 && close2 > low3 && low2 < low3 && close1 > high2 && close1 > high3 && low1 > low2) ||
            (close3 < open3 && close2 < open2 && (candle_size(2) < 3* candle_size(3)) && open2 > low3 && close2 > low3 && low2 < low3 && high1 < high2 && close1 > high2 && close1 > high3 && low1 < low2)) // Scenario 1 - 2 candle CRT
              {
               //Bullish
               countbull++;
               sall++;
               DrawArrow(objpref+TimeToString(iTime(Symbol(),tf,i+1),TIME_DATE|TIME_MINUTES)+"up",iTime(Symbol(),tf,i+1),iLow(Symbol(),tf,i+1),233,upcolor,ANCHOR_TOP);
               DrawText(objpref+" TU "+TimeToString(iTime(Symbol(),tf,i+1),TIME_DATE|TIME_MINUTES),iTime(Symbol(),tf,i+1),iLow(Symbol(),tf,i+1)-(offset*pips),upcolor,(string)countbull,0,ANCHOR_UPPER);
               if(savescreenshot)
                 {
                  ChartNavigate(handle,CHART_END,-1*i); //
                  string sdate = TimeToString(iTime(Symbol(),tf,i+1),TIME_DATE|TIME_MINUTES);
                  int r=0;
                  r +=StringReplace(sdate,".","");
                  r +=StringReplace(sdate," ","");
                  string tname= (foldername!="" ? foldername+"//" : "")+Symbol()+timeframe(tf)+(string)sall+".jpg"; //sdate
                  ChartScreenShot(handle,tname,widt,hight,ALIGN_LEFT);//ChartScreenShot(handle,tname,MathMin(widt,WIDTH),MathMin(hight,HEIGHT),ALIGN_LEFT);
                 }
              }
            //if(close2 > open2 && close1 < open1 && (open1-close1) > 2* (close2-open2) && open1 >=close2) //Engulfing
            if ((close3 > open3 && close2 < open2 && (candle_size(2) < 3 * candle_size(3)) && open2 < high3 && close2 < high3 && high2 > high3 && low1 > low2 && close1 < low3 && close1 < low2 && high1 < high2) ||
            (close3 > open3 && close2 > open2 && (candle_size(2) < 3 * candle_size(3)) && open2 < high3 && close2 < high3 && high2 > high3 && close1 < low3 && close1 < low2 && high1 < high2)) // Scenario 1 - 2 candle CRT
              {
               //Bearish
               countbear++;
               sall++;
               DrawArrow(objpref+TimeToString(iTime(Symbol(),tf,i+1),TIME_DATE|TIME_MINUTES)+"dwn",iTime(Symbol(),tf,i+1),iHigh(Symbol(),tf,i+1),234,dncolor,ANCHOR_BOTTOM);
               DrawText(objpref+" TD "+TimeToString(iTime(Symbol(),tf,i+1),TIME_DATE|TIME_MINUTES),iTime(Symbol(),tf,i+1),iHigh(Symbol(),tf,i+1)+(offset*pips),dncolor,(string)countbear,0,ANCHOR_LOWER);
               if(savescreenshot)
                 {
                  ChartNavigate(handle,CHART_END,-1*i); //
                  string sdate = TimeToString(iTime(Symbol(),tf,i+1),TIME_DATE|TIME_MINUTES);
                  int r=0;
                  r +=StringReplace(sdate,".","");
                  r +=StringReplace(sdate," ","");
                  string tname= (foldername!="" ? foldername+"//" : "")+Symbol()+timeframe(tf)+(string)sall+".jpg";//sdate
                  ChartScreenShot(handle,tname,widt,hight,ALIGN_LEFT);//MathMin(widt,WIDTH),MathMin(hight,HEIGHT
                 }
              }
           } //------
        }
Blindly following others will make you blind!
  • #75,007
  • Feb 11, 2025 5:46am Feb 11, 2025 5:46am
Quoting BestTraderEv
{quote} {file} Do not change the file name!!!
Thank you very much brother @ BestTraderEv....Much appreciated
  • #75,008
  • Edited 6:49am Feb 11, 2025 5:52am | Edited 6:49am
Quoting Georgebaker
{quote} So i have changed the code to this below, that should do the trick right? Result is the same, maybe there something i don't understand about coding for(int i = limit-1; i >=0; i--) { bool allwed = !usedatarange ? Time >= start_date && Time <=end_date : true; if( allwed ) { all++; double open1 = iOpen(Symbol(),tf,i+1); double open2 = iOpen(Symbol(),tf,i+2); double open3 = iOpen(Symbol(),tf,i+3); double high1 = iHigh(Symbol(),tf,i+1); double high2 = iHigh(Symbol(),tf,i+2); double high3 = iHigh(Symbol(),tf,i+3);...
It would be much easier if you attached the mq4 file.
Otherwise, what is this:
Inserted Code
//if(close2 < open2 && close1 > open1 && (close1-open1) > 2* (open2-close2) && open1<=close2) // Engulfing if((close2 < open2 && close1 > open1 && (close1-open1) < 3* (open2-close2) && open1 < low2 && low1 < low2 ) || (close2 < open2 && close1 < open1 && (open1-close1) < 3* (open2-close2) && open1 > low2 && close1 > low2 && low1 < low2)) // Scenario 1 - 2 candle CRT
???
If, in the code it's one line, it's ok.
If, in the code it's like what I see in your post, then it's not right.
That's one reason why the source code is needed, plus the exact explanation of the idea.
Because, otherwise, if the code returns no errors or warnings and is working on the chart, then what do you think anybody can do if they don't know what the idea is?
Also, I don't see you using MathAbs() in what you posted.
Anyways, if we are building a complex if() statement, it's a good idea to initialize bool variables, for example:
Inserted Code
// if ((close3 > open3 && close2 < open2 && (candle_size(2) < 3 * candle_size(3)) && open2 < high3 && close2 < high3 && high2 > high3 && low1 > low2 && close1 < low3 && close1 < low2 && high1 < high2) || (close3 > open3 && close2 > open2 && (candle_size(2) < 3 * candle_size(3)) && open2 < high3 && close2 < high3 && high2 > high3 && close1 < low3 && close1 < low2 && high1 < high2))
bool Cond1_3_is_Bulls = close3 > open3;
bool Cond2_2_is_Bears = close2 < open2;
bool Cond3_3times3_Body_grthn_2Body = candle_size(2) < 3 * candle_size(3);
// and so on...
// then do the if() on the bool vars
Also, you are free to name the variables whatever your personal language tells you is better.
As long as they don't exceed 63 characters.
So, in effect you could formulate an if statement like this:
Inserted Code
if(ThirdIsBullish&&
   SecondIsBearish&&
   3TimesThirdBodyIsGrtthnSecondBody)
 {
 MyDoSomethingFunction();
 }
.ex4/.ex5 files can't be fixed or modified / I'm not a coder!
  • #75,009
  • Feb 11, 2025 5:59am Feb 11, 2025 5:59am
Quoting sln
{quote} i downloaded the magicwaveBTEv but unable to see arrow setup in that.Any suggestions please?TIA
There is no arrow in that indicator.
I didn't have time to add it.
I am using another indicator which does the job well:
Attached File(s)
File Type: ex4 Beast Super Signal.ex4   51 KB | 380 downloads

Attached Image (click to enlarge)
Click to Enlarge Name: 2025-02-11_125933.jpg Size: 79 KB
.ex4/.ex5 files can't be fixed or modified / I'm not a coder!
  • #75,010
  • Feb 11, 2025 8:35am Feb 11, 2025 8:35am
Quoting Tankk
{quote} это "Хорошая система" от sanita22 ==
Dear Tankk!
Greetings )))
Please forgive me if I entered this thread of correspondence incorrectly. I did not understand how to start a new thread here on the forum site. I also did not find how to enter a personal message. And forgive me for this footcloth - I wanted to pack everything in one place - without stretching out the words by letters )))
Thank you very much for your CCI Volume Divergence TT.ex4 divergence indicator
Is this indicator your own development? and it cannot be provided with open source. right?
Then I kindly ask you to change it (add to it) so that:
1. there was an opportunity to choose three divergence options: hidden Hidden (which I really need NOW!!!), classic, and the current configuration: all together.
2. And for example, when choosing only hidden divergence and when a green arrow appears, so that the alert notification is written briefly (!!!) and in Russian: UP the name of the Currency pair. and vice versa.
It is not necessary to write in the alert notification that this is, for example, hidden divergence, it will already be selected by the user in the indicator settings. The time frame is also not necessary - the user himself knows in advance what time frame he is on. (and what we have now - these multi-letter words are very distracting and slow down the process of reading information: "Hidden bullish Divergence on: pair, 1 minute chart";
"Hidden bearish Divergence on: pair, 1 minute chart" and so on.
Thank you for understanding.
3. so that when an alert occurs, the arrow appears on the chart, on the candle when the alert occurs. And the arrow remains if the divergence display disappears here. And with the adjustment of the indent from the candle.
4. build into the indicator functionality a selection of alert notifications by the time interval when the arrow appears: for example, so that in the first 3 seconds of the beginning of the candle's life, if an alert (arrow) appears, only it is notified, everything that follows is ignored.
so far I have tried this time feature and was able to implement it with a third-party indicator, called TIMeR.ex4 by someone.
I insert it into settings:
a. name CCI Volume Divergence TT,
b. buffer numbering,
c. number 1 in Shift (since the arrow appears on the previous candle),
d. and in Time_Signal: 57 (here, if in the first 3 seconds of the candle life there is an alert from "CCI Volume Divergence TT" the arrow and notification will appear. the rest are ignored.)
5. (this item is in the plans, while it is being tested). in the plans there is a desire to make with such a configuration (for semi-automatic trading) - at the first (!!!) automatic entry into a deal, so that it enters from a rollback (if any) (with the removal of the writing of points for a rollback in the settings), the following deals (according to the martingale) go in manual mode in the same direction where the first arrow alert is - until victory! ))) maybe there will be full automation. While this item is being tested.
my observation: working on divergence I noticed that there is nothing better than manual trading on it. although it requires more mental energy, and therefore is tiring. (that's why point 2 from above)
maybe this nerve will pass with time. Any muscle is trained and progresses - with good dynamics))).
PS. does Tankk have a more advanced and better option than this one besides CCI Volume Divergence TT? why, by what characteristics is it better? is it available? or for a fee?
that's all. thank you very much for your answer and assistance.
Attached File(s)
File Type: ex4 CCI Volume Divergence TT.ex4   54 KB | 249 downloads
File Type: ex4 TIMeR.ex4   14 KB | 251 downloads
  • #75,011
  • Feb 11, 2025 10:42am Feb 11, 2025 10:42am
Quoting Flabby
Hello, is there a MT5 Supertrend EA I could get? Thank you.
Yes, it's in MQL5 Market and it's free:
Attached Image (click to enlarge)
Click to Enlarge Name: 2025-02-11_174215.jpg Size: 34 KB

BTW. Google doesn't work in Greece?
Attached Image (click to enlarge)
Click to Enlarge Name: 2025-02-11_175006.jpg Size: 9 KB
.ex4/.ex5 files can't be fixed or modified / I'm not a coder!
  • #75,012
  • Feb 11, 2025 11:03am Feb 11, 2025 11:03am
Quoting BestTraderEv
{quote} Yes, it's in MQL5 Market and it's free: {image} BTW. Google doesn't work in Greece? {image}
Thank you very much
  • #75,013
  • Feb 11, 2025 12:42pm Feb 11, 2025 12:42pm
Quoting Mohattaa
Dear Coders, Appreciate your help to modify attached file on Fibo Expansion (FE) to suit below requirements as per attached picture. Current FE moved once it manually refreshed. Requirements: 1. Line starts from "A" (same as Fibo Retracement), to "B" and "C". Only first Low and first High, wick to wick. 2. Drawn FE will stay there over a time. New FE on reversal side then shall be drawn. 3. Can make a selection on FE color and how many previous FE to display. {image} {file} Thanking you in advance...
https://www.forexfactory.com/thread/...h-objexpansion
.ex4/.ex5 files can't be fixed or modified / I'm not a coder!
  • #75,014
  • Edited 2:20pm Feb 11, 2025 1:54pm | Edited 2:20pm
Quoting BestTraderEv
{quote} It would be much easier if you attached the mq4 file. Otherwise, what is this: //if(close2 < open2 && close1 > open1 && (close1-open1) > 2* (open2-close2) && open1<=close2) // Engulfing if((close2 < open2 && close1 > open1 && (close1-open1) < 3* (open2-close2) && open1 < low2 && low1 < low2 ) || (close2 < open2 && close1 < open1 && (open1-close1) < 3* (open2-close2) && open1 > low2 && close1 > low2 && low1 < low2)) // Scenario 1 - 2 candle CRT ??? If, in the code it's one line, it's ok. If, in the code it's like what I see in your post,...
It's a script that tells u how many times in e.g. 2024 (or whatever year) do you have an engulfing pattern or a CRT (Candle Range Theory) pattern or something else you code it to look for in the logic.

Attached File(s)
File Type: mq4 Engulf_Log_scrp.mq4   12 KB | 362 downloads


Attached Image (click to enlarge)
Click to Enlarge Name: screenshot.png Size: 8 KB


The 2 candle in the red box is what does not seems to calculate correctly.
Blindly following others will make you blind!
  • #75,015
  • Feb 11, 2025 2:21pm Feb 11, 2025 2:21pm
Quoting Georgebaker
{quote} It's a script that tells u how many times in e.g. 2024 (or whatever year) do you have an engulfing pattern or a CRT (Candle Range Theory) pattern or something else you code it to look for in the logic. {file} {image}
So, you can't code this pattern like you are trying to, because it's not a fixed number of bars pattern.
The logic behind this pattern is that you are looking at High and Low prices, and then you scan to the right looking for candles whose Open & Close stay inside those two HL prices, and the first candle which break the High or the Low.
So, there are two loops:
One looking back, the other looking forward.
The first condition is that there is at least 1 "inside HL body", so basically the next candle is enough, and the second condition is that Close[i] > HighPrice or Close[i] < LowPrice.
Where the HighPrice and LowPrice must be already stored.
.ex4/.ex5 files can't be fixed or modified / I'm not a coder!
  • #75,016
  • Feb 11, 2025 2:27pm Feb 11, 2025 2:27pm
Quoting BestTraderEv
{quote} So, you can't code this pattern like you are trying to, because it's not a fixed number of bars pattern. The logic behind this pattern is that you are looking at High and Low prices, and then you scan to the right looking for candles whose Open & Close stay inside those two HL prices, and the first candle which break the High or the Low. So, there are two loops: One looking back, the other looking forward. The first condition is that there is at least 1 "inside HL body", so basically the next candle is enough, and the second condition is...
Its a 2 bar pattern, always

Only look at the picture in the middle, forget about the one to the left and right.

Btw. MathAbs is used at the last line (line 261)
Blindly following others will make you blind!
  • #75,017
  • Edited 4:26pm Feb 11, 2025 3:34pm | Edited 4:26pm
Quoting Georgebaker
{quote} Its a 2 bar pattern, always Only look at the picture in the middle, forget about the one to the left and right. Btw. MathAbs is used at the last line (line 261)
The pattern in the red box is:
Inserted Code
bool BullishFirst = Close[i+1]>Open[i+1] &&  
High[i]>High[i+1] &&
MathMax(Open[i],Close[i])<High[i+1] &&    // This ensures that the body can be green or red
MathMin(Open[i],Close[i])>Low[i+1] &&     // This ensures that the body can be green or red
Low[i]>Open[i+1] &&
MathAbs(Close[i+1]-Open[i+1])>3*MathAbs(Close[i]-Open[i]);  // This makes it universal (no negative value)
.ex4/.ex5 files can't be fixed or modified / I'm not a coder!
  • #75,018
  • Feb 12, 2025 12:44am Feb 12, 2025 12:44am
Hello coders I have attempted to form a bot out of deepseek but its not oppening any trade can you help me. And your expert opinion on this will it at least give 70% win rate, kindly help me.
Attached File(s)
File Type: mq4 Rohit gold.mq4   8 KB | 275 downloads
  • #75,019
  • Feb 12, 2025 12:45am Feb 12, 2025 12:45am
I have this script that, when attached to the graph, closes the operation with the desired pips, but it does not work for BTCUSD. Would you be so kind as to make it work for cryptos?

Thank you for your selfless and hard work.
Attached File(s)
File Type: mq4 0-A SL 0050.mq4   1 KB | 288 downloads
  • #75,020
  • Feb 12, 2025 1:10am Feb 12, 2025 1:10am
Hello everyone! anyone can please help me to edit this indicator to plot the price labels on future bars instead of current bar?


Attached File(s)
File Type: mq5 RoundLevels.mq5   9 KB | 272 downloads
103 traders viewing now, 1 is registered:
malikasiff