I will code your EAs and Indicators for no charge | Page 3543 | Crypto Craft

Options

Go to
Permalinks
Print Thread

Similar Threads

I will code your pivot EAs for no charge 28 replies

I will code your scalping EAs for no charge 163 replies

Oanda MT4 - Indicators and EAs not showing 2 replies

EAs and indicators relating to moutaki... 22 replies

InterbankFX has loaded its MT4 platform with custom EAs, indicators and scripts 1 reply

Attachments: I will code your EAs and Indicators for no charge
Exit Attachments

I will code your EAs and Indicators for no charge

  • #70,841
  • Aug 17, 2024 12:56pm Aug 17, 2024 12:56pm
[quote=mntiwana;14966300]{
hello sir this indicator old version. plz make this 2 indicator new mt4 version

plz help make this new mt4 version
Attached File(s)
File Type: ex4 DE 22.ex4   98 KB | 280 downloads
File Type: ex4 DE 23.ex4   28 KB | 300 downloads
  • #70,842
  • Aug 17, 2024 1:01pm Aug 17, 2024 1:01pm
Quoting naick
{quote} Yes The idea is like this if we take 1hr candle say i bar. we are intereseted only to read exact time occured during its highest & lowest tick of candle. time occured at open & close of candle generally we can we say that: start time at open of i bar is after the closing price of i+1 bar end time at close of i bar is before the opening price of i-1 bar. time at highest tick formed within the i bar is to be determined. time at lowest tick formed within the i bar is to be determined.
This can not be determined with normal MT4 procedures.
We would need to record every tick in a text file, and then read that data from that text (csv) file.
And this file would really grow heavy very quickly.
This can only be determined by M1 (1 minute data) with standard procedures.
.ex4/.ex5 files can't be fixed or modified / I'm not a coder!
  • #70,843
  • Aug 17, 2024 1:12pm Aug 17, 2024 1:12pm
Quoting BestTraderEv
{quote} This can not be determined with normal MT4 procedures. We would need to record every tick in a text file, and then read that data from that text (csv) file. And this file would really grow heavy very quickly. This can only be determined by M1 (1 minute data) with standard procedures.
OK.
we need it in Mql5.
But it must be very precise time as you said exact time at highest tick & lowest tick to be recorded.
Just two pieces of information i.e. exact time at highest tick & lowest tick of a candle occured in the history is very important in analysis of price action.

Hope you can do this please.
Thanks.
KABIR IS ALMIGHTY GOD. RIGHT WAY OF WORSHIP=ROI, WRONG WAY OF WORSHIP=LOI
  • #70,844
  • Aug 17, 2024 1:15pm Aug 17, 2024 1:15pm
Quoting naick
...Open & Close of Price & Time. But for High & Low we can read only Price but not Time...
This depends on 1minute price history being available at that higher tf candle.

OHLC_info_mouse
- will show ohlc prices at the mouse cursor
- optional time
- optional 1minute of high/low
- optional vline
pic
Attached Image (click to enlarge)
Click to Enlarge Name: screenshot.png Size: 10 KB

gif
Attached Image (click to enlarge)
Click to Enlarge Name: misc gif 1.gif Size: 188 KB
Attached File(s)
File Type: ex4 OHLC_info_mouse.ex4   18 KB | 321 downloads
  • #70,845
  • Aug 17, 2024 2:23pm Aug 17, 2024 2:23pm
Hi BestTraderEv,

The very first indicator that you coded for me & one other that another coded are the only two custome indicators that I use in my trading on a daily basis.
Thank you for all your help that you've given me.

Do you know of an Auto Fibo indicator that will update on its own at the end of the day. I have searched & found several, but they will not update without refreshment of the chart. I'm not sure there is such an indicator. If you know of one, I would appreciate if you would let me know where it can be found. Thank you.
  • #70,846
  • Aug 17, 2024 2:46pm Aug 17, 2024 2:46pm
Quoting acetrader
Hi BestTraderEv, The very first indicator that you coded for me & one other that another coded are the only two custome indicators that I use in my trading on a daily basis. Thank you for all your help that you've given me. Do you know of an Auto Fibo indicator that will update on its own at the end of the day. I have searched & found several, but they will not update without refreshment of the chart. I'm not sure there is such an indicator. If you know of one, I would appreciate if you would let me know where it can be found. Thank you.
I don't use Fibo at all, and certainly not any Auto Fibo.
So, I can't help you with which updates itself.
.ex4/.ex5 files can't be fixed or modified / I'm not a coder!
  • #70,847
  • Aug 17, 2024 2:51pm Aug 17, 2024 2:51pm
Quoting BestTraderEv
{quote} I don't use Fibo at all, and certainly not any Auto Fibo. So, I can't help you with which updates itself.

Hi BestTraderEv,

I totally understand & thank you again for everything.
  • #70,848
  • Aug 17, 2024 4:34pm Aug 17, 2024 4:34pm
Hi guys
do you also help with mt5 or is this thread for mt4 only?
thank you
  • #70,849
  • Aug 17, 2024 7:31pm Aug 17, 2024 7:31pm
Quoting jeanlouie
{quote} This depends on 1minute price history being available at that higher tf candle. OHLC_info_mouse - will show ohlc prices at the mouse cursor - optional time - optional 1minute of high/low - optional vline pic {image} gif {image} {file}
Hi can we record time at highest tick and time lowest tick as said in the post
Quote
https://www.forexfactory.com/thread/...0#post14967400
so that we will have exact time of in seconds format also.
The indicator which you did considers only 1min data as least one. so if we take 1min time frame candle then time @ high & low price occured must be in seconds format. So you have to consider tick data as said in the post link mentioned. Thanks for the helping.
Thanks & Regards.
KABIR IS ALMIGHTY GOD. RIGHT WAY OF WORSHIP=ROI, WRONG WAY OF WORSHIP=LOI
  • #70,850
  • Aug 17, 2024 8:04pm Aug 17, 2024 8:04pm
Quoting BestTraderEv
{quote} This can not be determined with normal MT4 procedures. We would need to record every tick in a text file, and then read that data from that text (csv) file. And this file would really grow heavy very quickly. This can only be determined by M1 (1 minute data) with standard procedures.
Quote
And this file would really grow heavy very quickly.
yes you are right. But if we really do this stuff then we will have exact time at based on tick.
accordingly the analysis of price action works fine.
But if we consider only 1min data we can check any candle above 1min and we also encounter a problem +/-60 seconds as least count error.
If we are analysing 1min TF chart we need exact time for analysis of price action.
if we are analysing bigger time frame like 30min or 1hr or daily 1min error can be handled.
But to do scalping analysis we need to monitor exact time at tick levels.
what i understood is file would grow heavy very quickly in text format as you said. But to decrease the load on sysstem can we limit history of tick data in past from current tick? so that we can reduce the load on system there by we can do the scalping anaysis (1min to 5min TF candles).
example: tick by tick data time we store in history for complete one day i.e. history of 86400 seconds only. so this way csv will be updated in history every time new tick arrives.
Yes ofcurse, the above idea is to show the time at highest tick and lowest tick on particular candle ranging from 1min to 5min.
But for 30min, 1hr or higher time frame to show the exact time at highest tick and lowest tick of the candle we need a bigger csv tick data recorded file. But on higher time frame if this is not possible then time format can be limited minuites only.
so in either case we have to code indicator in two ways
one to show time format till seconds for scalping
other to show time format till maxium of minutes for swing trading.
in both the case we are not allowing the csv file to grow heavily.
I do not know the coding and zero knowledge. But can we apply idea presented here please?
KABIR IS ALMIGHTY GOD. RIGHT WAY OF WORSHIP=ROI, WRONG WAY OF WORSHIP=LOI
  • #70,851
  • Aug 17, 2024 8:56pm Aug 17, 2024 8:56pm
Quoting deroty
Hi. I purchased an EA from MQL5. I installed it on 6 Metatraders. However there is a problem. When I startup the computer some Metatraders give error, detaching the EA. When I run the metatraders one after another by clicking on shortcuts no problem. It happens only in the startup - not manually starting. What can I do?
This is a very ridiculous question, I've ever seen
The man behind the gun
  • #70,852
  • Edited Aug 18, 2024 12:11am Aug 17, 2024 11:54pm | Edited Aug 18, 2024 12:11am
[quote=Mglahiru95;14967398]
Quoting mntiwana
{ hello sir this indicator old version. plz make this 2 indicator new mt4 version plz help make this new mt4 version {file} {file}
Please post the indicator with its original name (must be working version) since you posted a non working/displaying version (at least with me)
  • #70,853
  • Aug 18, 2024 12:16am Aug 18, 2024 12:16am
Quoting DON-K
{quote} hi mntiwana is there a way to make the default SMI (Gold colour) correspond with Blau SMI (lime and red colour) have tried playing with the settings but it does not seem to work {image} {file} {file}
Please explain more in details what you want to achieve,where is default SMI indicator
  • #70,854
  • Aug 18, 2024 1:27am Aug 18, 2024 1:27am
Quoting naick
{quote} ...time at highest tick and time lowest tick as said in the post {quote} so that we will have exact time of in seconds...
Seconds wasn't mentioned in the first post and the pic used was above 1min tf, I didn't get the need of seconds.

Tick_HL_timeseconds
- prints the seconds of the tick when highest and lowest price occurred
- running live only
- option to show the minute, only if tf is above 1min
- styling, rotation
pics are from the tester, though btcusd is live to run on
Attached Image (click to enlarge)
Click to Enlarge Name: screenshot.png Size: 10 KB
Attached File(s)
File Type: ex4 Tick_HL_timeseconds.ex4   13 KB | 302 downloads
  • #70,855
  • Aug 18, 2024 1:42am Aug 18, 2024 1:42am
Quoting mntiwana
{quote} Please explain more in details what you want to achieve,where is default SMI indicator
Hi Mntiwana
this is the SMI that is default in the SMTMMS oscillator indicator i posted
Attached Image (click to enlarge)
Click to Enlarge Name: AUDUSDM30.png Size: 25 KB

Attached File(s)
File Type: mq4 smTMMS Oscillator_v7.3.1.mq4   27 KB | 322 downloads

but i want it to have the same setting with this Blau SMI a different indicator i attached to the SMTMMS OSCILLATOR
Attached Image (click to enlarge)
Click to Enlarge Name: AUDUSM30.png Size: 28 KB

I have tried playing with the settings but its not working
Attached File(s)
File Type: ex4 Blau - smi averages(mtf + alerts +fl).ex4   176 KB | 336 downloads
  • #70,856
  • Aug 18, 2024 1:58am Aug 18, 2024 1:58am
Quoting elgaza
Hi guys do you also help with mt5 or is this thread for mt4 only? thank you
sorry not trying to be annoying but really wanted to know if I can get some help here regarding mql5
thanx
  • #70,857
  • Aug 18, 2024 2:56am Aug 18, 2024 2:56am
Quoting DON-K
{quote} Hi Mntiwana this is the SMI that is default in the SMTMMS oscillator indicator i posted {image} {file} but i want it to have the same setting with this Blau SMI a different indicator i attached to the SMTMMS OSCILLATOR{image} I have tried playing with the settings but its not working {file}
Unfortunately your logic is out of my approach,may be swingman can help you
  • #70,858
  • Aug 18, 2024 2:57am Aug 18, 2024 2:57am
[quote=mntiwana;14967580]
Quoting Mglahiru95
{quote} Please post the indicator with its original name (must be working version) since you posted a non working/displaying version (at least with me)
plz update working new mt4 version. this is old version indicator
Attached Image (click to enlarge)
Click to Enlarge Name: photo_2019-04-22_10-54-16.jpg Size: 132 KB
Attached File(s)
File Type: rar RENEGADE TRADING SYSTEM.rar   578 KB | 475 downloads
  • #70,859
  • Aug 18, 2024 3:01am Aug 18, 2024 3:01am
Quoting elgaza
{quote} sorry not trying to be annoying but really wanted to know if I can get some help here regarding mql5 thanx
Generally the thread is not limited to mt4/5,usually peoples post here their inquires/requests,if some one able and interested to do a favor,he do,so you can try posting your request
  • #70,860
  • Aug 18, 2024 3:17am Aug 18, 2024 3:17am
Quoting mntiwana
{quote} Generally the thread is not limited to mt4/5,usually peoples post here their inquires/requests,if some one able and interested to do a favor,he do,so you can try posting your request
After the jam, the strong movement starts. But I don't know the input settings.
https://forex-station.com/adx-dmi-in...ml#p1295350800
Attached Image (click to enlarge)
Click to Enlarge Name: Screenshot_20240817-222433~2.jpg Size: 325 KB
201 traders viewing now, 2 are registered:
JaniceKelly
,
Dave9