I will code your EAs and Indicators for no charge

Quoting Elvxyz20

Disliked

Good day kings kindly add an arlet each time color changes {file} {file}

Ignored

Quoting BestTraderEv

Disliked

{quote} I have already posted such an indicator before: {file} Do not change the file name! Also, you can explore this link: https://www.luxalgo.com/library/

Ignored

Quoting BestTraderEv

Disliked

{quote} If you are using {file} then you can have all the options you want. For the same symbol as the main chart, you just leave the symbol input field blank. And you can also plot the minicharts in the main window. Up to 30 mini charts. You need to study the inputs to figure it out. If you want to use custom indicators on mini chart, then no, you can't.

Ignored

Quoting JohnL33

Disliked

{quote} Its ok...i just want to use custom indi for minichart .i try to search again..thank for reply.

Ignored

void OnTick()
  {
    int minutoX = TimeMinute(TimeCurrent());
    int secX = TimeSeconds(TimeCurrent());

   if(
    ( minutoX == (1) && secX == (30)) || ( minutoX == (3) && secX == (30)) || ( minutoX == (5) && secX == (30)) || ( minutoX == (7) && secX == (30)) || ( minutoX == (9) && secX == (30)) || ( minutoX == (11) && secX == (30)) || ( minutoX == (13) && secX == (30)) || ( minutoX == (15) && secX == (30)) || ( minutoX == (25) && secX == (30)) || ( minutoX == (27) && secX == (30)) || ( minutoX == (29) && secX == (30)) || ( minutoX == (48) && secX == (30))
    )
   double OrderStopLoss = 0 ;
  }

Quoting BestTraderEv

Disliked

{quote} Yes, if your broker allows this, and most likely he does, you can place your order immediatelly with SL and TP. No need to do the OrderModify() step. I have modified the code to place the SL and TP directly with the OrderSend(). {file} You still need to know if your broker uses minimal STOPLEVEL and/or FREEZELEVEL. We can't place SL and TP at less than minimum allowed pts by the broker.

Ignored

Quoting PinoArla

Disliked

Hello guys I really hope someone could put me in the right direction I need to delete the stop loss at a certain time - (at a X minute and 30 seconds) what I've tried so far is this, but it does not work. void OnTick() { int minutoX = TimeMinute(TimeCurrent()); int secX = TimeSeconds(TimeCurrent()); if( ( minutoX == (1) && secX == (30)) || ( minutoX == (3) && secX == (30)) || ( minutoX == (5) && secX == (30)) || ( minutoX == (7) && secX == (30)) || ( minutoX == (9) && secX == (30)) || ( minutoX == (11) && secX == (30)) || ( minutoX == (13) && secX...

Ignored

Quoting CGdcv

Disliked

{quote} honestly speaking here, i dont need a normal ordersend() instruction, i need those modifications which could enable DYNAMIC TRAILING ,no matter sl or tp,as long as it could be adjusted from time to time, especially after a minute of opened order, then it will be completely ok

Ignored

Quoting BestTraderEv

Disliked

{quote} And, of course, the stupidest thing to do is remove your Stop Loss. This means that you can't afford to lose. Which means that you don't know what you're doing. Which means that you shouldn't risk any of your real money. And, you will do whatever you will do, anyways.

Ignored

if( ( minutoX == (2)) || ( minutoX == ( 4 ) ) || ( minutoX == ( 6 )) || ( minutoX == ( 8 )) || ( minutoX == ( 10 )) || ( minutoX == ( 12 )) || ( minutoX == ( 14 )) || ( minutoX == ( 16 )) || ( minutoX == ( 26 )) || ( minutoX == ( 28 )) || ( minutoX == ( 30 )) || ( minutoX == ( 46 ))  ) TrailingStopSet(OP_BUY, (
    iCustom(....)
   if( ( minutoX == (2)) || ( minutoX == ( 4 ) ) || ( minutoX == ( 6 )) || ( minutoX == ( 8 )) || ( minutoX == ( 10 )) || ( minutoX == ( 12 )) || ( minutoX == ( 14 )) || ( minutoX == ( 16 )) || ( minutoX == ( 26 )) || ( minutoX == ( 28 )) || ( minutoX == ( 30 )) || ( minutoX == ( 46 ))  ) TrailingStopSet(OP_SELL, (
    iCustom(...)

Quoting PinoArla

Disliked

Hello {quote} the next instruction that will run after deleting the SL will be setting a new level of Trailing Stop using a Custom indicator. if( ( minutoX == (2)) || ( minutoX == ( 4 ) ) || ( minutoX == ( 6 )) || ( minutoX == ( 8 )) || ( minutoX == ( 10 )) || ( minutoX == ( 12 )) || ( minutoX == ( 14 )) || ( minutoX == ( 16 )) || ( minutoX == ( 26 )) || ( minutoX == ( 28 )) || ( minutoX == ( 30 )) || ( minutoX == ( 46 )) ) TrailingStopSet(OP_BUY, ( iCustom(....) if( ( minutoX == (2)) || ( minutoX == ( 4 ) ) || ( minutoX == ( 6 )) || ( minutoX ==...

Ignored

Quoting BestTraderEv

Disliked

{quote} Why wouldn't a custom indicator work? Are you getting the data by iCustom(), or what exactly are you doing?

Ignored

Quoting BestTraderEv

Disliked

{quote} EA is not indicator, so we don't plot indicators using EA's. In MQL5 it is easier, because there is the ChartIndicatorAdd() function. It is not available in MQL4. We can add indicators to chart by EA using a different solution, but then you need to set the added indicators to the same parameters as in the EA, so it makes little sense. The easiest solution is for you to create a template which would contain the EA and the indicators. However, you will need to to...

Ignored

Quoting PinoArla

Disliked

Hello guys I really hope someone could put me in the right direction I need to delete the stop loss at a certain time - (at a X minute and 30 seconds) what I've tried so far is this, but it does not work. void OnTick() { int minutoX = TimeMinute(TimeCurrent()); int secX = TimeSeconds(TimeCurrent()); if( ( minutoX == (1) && secX == (30)) || ( minutoX == (3) && secX == (30)) || ( minutoX == (5) && secX == (30)) || ( minutoX == (7) && secX == (30)) || ( minutoX == (9) && secX == (30)) || ( minutoX == (11) && secX == (30)) || ( minutoX == (13) && secX...

Ignored

void OnTick()
  {
   MqlDateTime dt;
   TimeToStruct(TimeCurrent(),dt);
   if(dt.sec == 30)
     {
      switch(dt.min)
        {
         case 1:
         case 3:
         case 5:
         case 7:
         case 9:
         case 11:
         case 13:
         case 15:
         case 25:
         case 27:
         case 29:
         case 48:
#ifdef __MQL5__
            for(int i=PositionsTotal()-1; i>=0; i--) //count backwards
              {
               ulong ticket = PositionGetTicket(i);
               if(PositionSelectByTicket(ticket)) // select the order
                 {
                  // set stop loss to 0 using PositionModify or Custom function
                 }
              }
#else
            for(int i=OrdersTotal()-1; i>=0; i--)  //count backwards
              {
               if(OrderSelect(i,SELECT_BY_POS))  // select the order
                 {
                  // set stop loss to 0 using OrderModify or Custom function
                 }
              }
#endif
            break;
        }
     }
  }

Quoting jesters

Disliked

...an indicator that alerts me with an arrow (and whatever custom wav file I choose)...a down bar that closes at the low tick would have a red arrow above the bar (on close)...

Ignored

Quoting FxArt.Trader

Disliked

{quote}...

Ignored

Quoting jeanlouie

Disliked

{quote} Examples of ma crossover in mql4 and mql5, and macd with chart arrows in mql5, note additional and different things that are done with mt5. Use the current event handlers that are given to you when you start a new indicator. Prevcalculated is the number of bars on the previous call of oncalculate, ie on first loading or chart has updated it's history, prevcalculated is 0, on the next tick it will be equal to ratestotal which is the number of bars on the chart. Indicator styling should be set in properties so that every time the indicator...

Ignored

Quoting hoomas

Disliked

{quote} Hi Master. sorry for this request. Could you convert this code for mq4? appreciated. {file}

Ignored

Quoting jblanked

Disliked

{quote} #ifdef __MQL5__ for(int i=PositionsTotal()-1; i>=0; i--) //count backwards

Ignored

      {
                    bool res= OrderModify( i ,OrderOpenPrice(), 0.0,OrderTakeProfit(),0,Blue);
                    if(!res)
                    Print("Error in OrderModify. Error code=",GetLastError());
                    else
                       Print("Order modified successfully.");                                 // set stop loss to 0 using PositionModify or Custom function
         }