I will code your EAs and Indicators for no charge

Quoting jameslee324

Disliked

hi all dear member , can add alert to this indicator ?? {file} {file}

Ignored

Quoting Fiox89

Disliked

Hello. I'm looking for a scaling in EA, maybe it already exists? Briefly, if there is one Buy position for the cross, the EA has to open new buy position every time a candle closes and the closing price is higher than the price of the last open buy position. The opposite for Sell, if there is one Sell position for the cross, the EA must open a new sell position every time the candle closes and the closing price is lower than the price of the last open sell position. (repeat until there are no more open positions for that cross). If possible, with...

Ignored

Quoting killurego

Disliked

First of all - Thanks to all coders helping the community... Wondering, Is there any EA which will read the push notification from the indicator and place accordingly? Example : If push notification from the indicator says "Sell below 2208.2" then EA should place a pending order on that level. SL and TP should be open to customize in Inputs section. Thanks.

Ignored

Quoting lain7123

Disliked

Hello everyone can someone please help me make this margintrader EA work again? I already placed all the files in the original thread where they are supposed to go, still get "zero divide" error {image}{file} Original thread link: https://www.forexfactory.com/thread/...argintrader-ea

Ignored

void OneCancelsTheOther()
{
   //Deletes a pending trade when its partner has filled
   OrderSelect(LongTicketNo, SELECT_BY_TICKET);
   if (OrderType() == OP_BUY) OrderDelete(ShortTicketNo);
   if (OrderType() == OP_SELL) OrderDelete(LongTicketNo);
   OrderSelect(ShortTicketNo, SELECT_BY_TICKET);
   if (OrderType() == OP_BUY) OrderDelete(ShortTicketNo);
   if (OrderType() == OP_SELL) OrderDelete(LongTicketNo);
}//End void OneCancelsTheOther()

void GetAggregatePosition()
{
   //returns the total trades for the pair - open, won, lost, also the ticket nos for open trades
   
   open = 0;
   won = 0;
   lost = 0;
   total = 0;
   LongTicketNo = 0;
   ShortTicketNo = 0;
   
   
   //Open trades
   if (OrdersTotal() > 0)
   {
      for (int cc = OrdersTotal() - 1; cc >= 0; cc--)
      {      
         if (!OrderSelect(cc, SELECT_BY_POS, MODE_TRADES) ) continue;
         if (OrderMagicNumber() == MagicNumber && OrderSymbol() == Symbol() && OrderCloseTime() == 0)       
         {
            open++;
            if (OrderType() == OP_BUY || OrderType() == OP_BUYSTOP) LongTicketNo = OrderTicket();
            if (OrderType() == OP_SELL || OrderType() == OP_SELLSTOP) ShortTicketNo = OrderTicket();
         }//if (OrderMagicNumber() == MagicNumber && OrderSymbol() == Symbol())       
      }//for (int cc = OrdersTotal() - 1; cc >= 0, cc--)  
   }//if (OrdersTotal() > 0)
   
   //History tab
   if (OrdersHistoryTotal() == 0) 
   {
      total = open + lost + won;
      return;
   }//if (OrdersHistoryTotal() == 0) 
   
   for (cc = OrdersHistoryTotal() - 1; cc >= 0; cc--)
   {      
      OrderSelect(cc, SELECT_BY_POS, MODE_HISTORY);
      if (OrderMagicNumber() == MagicNumber && OrderSymbol() == Symbol())       
      {
         if (OrderProfit() < 0) lost++;
         if (OrderProfit() > 0) won++;         
      }//if (OrderMagicNumber() == MagicNumber && OrderSymbol() == Symbol())       
   }//for (int cc = OrdersTotal() - 1; cc >= 0, cc--)  
   
   total = open + lost + won;
      
   
   
}//void GetAggregatePosition()
 
 
void OnTick()
{
//----
   
   update_graphics();
   
   CurrentFloatingProfit = AccountProfit();
   
   if (CurrentFloatingProfit < 0.0 && CurrentFloatingProfit < LowestFloatingProfit) 
      {
      LowestFloatingProfit = CurrentFloatingProfit;
      }
   /*
   This code needs to:
      - detect and inside bar and draw the high/low lines
      - send a pending trades 
      - delete the lines if the trade fills
   */
   //Trading times. Need to run the check first to avoid sending trades outside trading hours
   bool TradeTimeOk = CheckTradingTimes();
   //Find open trades.   
   CountOpenTrades();
   if (OrdersTotal() == 0)
   {
      TicketNo = -1;
      BuyOpen = false;
      SellOpen = false;
   }//if (OrdersTotal() == 0)
   //Remove the bar lines if there is a filled trade. The dotted lines are left behind for the record
   if ((BuyOpen || SellOpen) && (BarHigh > 0 || BarLow > 0) ) DeleteInsideBarLines();
   //Remove the IB lines if there is no trade to justify them being there
   if (OpenTrades == 0 && (ObjectFind(ibhighline) > -1 || ObjectFind(iblowline) > -1) ) DeleteInsideBarLines();
   
   
   //Detect inside bar formation. Send pending trade if necessary.
   if (OldBars != Bars)
   {
      
      if (ObjectFind(ibhighline) == -1 || ObjectFind(iblowline) == -1) LookForInsideBar();
      OldBars = Bars;
   }//if (OldBars != iBars(NULL, PERIOD_H1)
   
   
   //Reread the hi-lo of the ib lines
   BarHigh = 0;
   BarLow = 0;
   if (ObjectFind(ibhighline) > -1) BarHigh = ObjectGetValueByShift(ibhighline, 0);
   if (ObjectFind(iblowline) > -1) BarLow = ObjectGetValueByShift(iblowline, 0);
   
   
   //Send pending trade if there is not one already in place, and the ea has just detected a new IB.
   //TickenNo is set to -1 in CountOpenTrades(), and only has a >-1 value if Dibs detects a trade.
   if (BarHigh > 0 && BarLow > 0 && TicketNo == -1
                   && Bid < BarHigh && Bid > BarLow  && kayBarExtent >= MinIBRng && kayBarExtent <= MaxIBRng)  //added by me
                    
   {
      SendPendingTrade();
     
   }
   
   //from here 
   GetAggregatePosition();
   
   //Called if there are any open trades
   for (int cc = OrdersTotal() - 1; cc >=0; cc--)
   {
      if (!OrderSelect(cc, SELECT_BY_POS) ) continue;
      if (OrderSymbol() == Symbol() )
      {
         TicketNo = OrderTicket();
         
         OrderSelect(TicketNo, SELECT_BY_TICKET);//Should not need re-selecting, but just in case
         
         OneCancelsTheOther();
   
       }
     }
   //to here added by me to try implement OCO
   
   //Manage open trades
   if ((BuyOpen || SellOpen) && OrderProfit() > 0)
   {
      if (OrderProfit() > 0) TradeManagementModule();
      //LookForTradeClosure();
   }//if (OpenTrades > 0)
   
   DisplayUserFeedback();
   
//----
   //return(0);
}

Quoting BestTraderEv

Disliked

{quote} Now, this idea I do like! {image} The EA creates these buttons: {image} The EA does not place any SL or TP orders on the broker's server!!! The Trader defines their Stop Loss and/or Take Profit in Money. If the Stop Loss in cash is > 0, the EA will plot an info line with info label. If the Take Profit in cash is > 0, the EA will plot an info line with info label. {image} We can also define Minimal Points Between Positions to avoid too many trades. We can use the EA to trade only one position by Select EA Logic = Use Single Position TP &...

Ignored

Quoting danjuma

Disliked

Hi all, I made a request in this post some days ago https://www.forexfactory.com/thread/...6#post14787716 about incorporating a OCO (one cancel the other) code in an EA. Did not get much response, so I tried to figure it out myself (I am not well versed in coding mql4, just get by by copying and modifying other snippets of code as best as I can). I thought I had figured it out, but unfortunately it is not working the way I want it. Basically, my EA trades inside bars, and sends a pending buy order (at high of the IB) and pending...

Ignored

Quoting BestTraderEv

Disliked

{quote} https://www.mql5.com/en/code/22009

Ignored

Quoting danjuma

Disliked

{quote} Hello. Thanks for your response. However, not sure how this helps me. I am not looking for an EA for OCO; I can find these easily myself. My request is to why the OCO code in my EA is not working as I want it to, as explained in my original post.

Ignored

Quoting Tidy

Disliked

{quote} ...load two to three ...pivot width...

Ignored

Quoting BestTraderEv

Disliked

{quote} Well, if you attempt to code EA's, you need to understand what you're doing. The EA I linked to is open source code, so you can look at it and figure out for yourself. And, you are right. If you can find an already existing open source code, you can also use it to your advantage.

Ignored

Quoting BestTraderEv

Disliked

{quote} This is what I can do: {image} {image} If this doesn't help, then I will not do anything further, because I do not wish to download all the stuff that is needed for this EA to compile. {file} When we want to divide, we need to make sure that we aren't dividing by 0, because that is an illegal operation.

Ignored

Quoting jeanlouie

Disliked

{quote} v1.1 - multiple loading with different settings - optional sizes for left/right sides of highs/lows, ie fractal/pivot-hl sides {image} {file}

Ignored

Quoting Slingshots1

Disliked

{quote} Hi BESTEV. please I need a Simple Moving Average mt4 set to 5 with alert coded ,for both daily and weekly candles . I want the alert to have the pair name inserted. Example ...Eurusd daily candle or (weekly) candle closes above or below 5sma....I know you can have stuff like that in your arsenal , please kindly help me.Thanks

Ignored

Quoting jeanlouie

Disliked

{quote} RSI_Trendlines - plots trendlines on the rsi that converge, ie upper slopes down, lower slopes up - uses pivot high/low ie fractals for peaks/troughs - draws first breakout on loading, then breakout of the recently completed bar going forward - option to show only breaks when rsi is behind the 50 level for each direction - note that trendlines lag siginificantly - v1.1 - multiple loading with different settings - optional sizes for left/right sides of highs/lows, ie fractal/pivotl sides {image} {file}

Ignored