I will code your EAs and Indicators for no charge | Page 3193 | Crypto Craft

Options

Go to
Permalinks
Print Thread

Similar Threads

I will code your pivot EAs for no charge 28 replies

I will code your scalping EAs for no charge 163 replies

Oanda MT4 - Indicators and EAs not showing 2 replies

EAs and indicators relating to moutaki... 22 replies

InterbankFX has loaded its MT4 platform with custom EAs, indicators and scripts 1 reply

Attachments: I will code your EAs and Indicators for no charge
Exit Attachments

I will code your EAs and Indicators for no charge

  • #63,841
  • Oct 5, 2023 3:45pm Oct 5, 2023 3:45pm
Quoting pips4life
{quote} It looks like you haven't installed that stratman.font file (See stratman.zip file here).
I told him that, look here:
https://www.forexfactory.com/thread/...2#post14605602
.ex4/.ex5 files can't be fixed or modified / I'm not a coder!
  • #63,842
  • Oct 5, 2023 4:02pm Oct 5, 2023 4:02pm
Quoting BestTraderEv
{quote} I told him that, look here: https://www.forexfactory.com/thread/...2#post14605602
I see that now; I had not read every post but he obviously did not read or understand your clear tip about the font file.

Since the original youtube videos with tips on installation are no longer available, then the short answer for how to install the font is:

1. Download the stratman.zip
2. Open the zip file using File Explorer (or anything that reads a zip file contents).
3. Double-click on 'stratman.fon'
4. Where it says 'Install' at the top, click on that. If it happens to ask for Administrator privileges, do whatever it takes to install it.

Attached Image (click to enlarge)
Click to Enlarge Name: screenshot.png Size: 6 KB
  • #63,843
  • Oct 5, 2023 4:07pm Oct 5, 2023 4:07pm
Quoting pips4life
{quote} I see that now; I had not read every post but he obviously did not read or understand your clear tip about the font file. Since the original youtube videos with tips on installation are no longer available, then the short answer for how to install the font is: 1. Download the stratman.zip 2. Open the zip file using File Explorer (or anything that reads a zip file contents). 3. Double-click on 'stratman.fon' 4. Where it says 'Install' at the top, click on that. If it happens to ask for Administrator privileges, do whatever it takes to install...
It's like this:
You help him (I have helped him many times),
You spend time trying to tell him what to do,
You even remember about that font, because it's not the first time people do the same thing,
You post the link to the original thread, where everything is pretty much explained...

They still do the same...

So, no wonder I get frustrated!

It literally says that, there:
Attached Image (click to enlarge)
Click to Enlarge Name: 2023-10-05_231423.jpg Size: 162 KB
.ex4/.ex5 files can't be fixed or modified / I'm not a coder!
  • #63,844
  • Oct 5, 2023 4:13pm Oct 5, 2023 4:13pm
Quoting pips4life
{quote} I see that now; I had not read every post but he obviously did not read or understand your clear tip about the font file. Since the original youtube videos with tips on installation are no longer available, then the short answer for how to install the font is: 1. Download the stratman.zip 2. Open the zip file using File Explorer (or anything that reads a zip file contents). 3. Double-click on 'stratman.fon' 4. Where it says 'Install' at the top, click on that. If it happens to ask for Administrator privileges, do whatever it takes to install...
Thanks a lot for your help, the video did not open in my location, i got the font file but dont know what to do with it, i have installed i will try
  • #63,845
  • Oct 5, 2023 4:15pm Oct 5, 2023 4:15pm
Quoting BestTraderEv
{quote} It's like this: You help him (I have helped him many times), You spend time trying to tell him what to do, You even remember about that font, because it's not the first time people do the same thing, You post the link to the original thread, where everything is pretty much explained... They still do the same... So, no wonder I get frustrated!
Sorry Sir please dont get frustrated we just dont have same understanding, thats why sometimes we make post to create the understanding
  • #63,846
  • Oct 5, 2023 4:23pm Oct 5, 2023 4:23pm
Quoting Samalin
{quote} Thanks a lot for your help, the video did not open in my location, i got the font file but dont know what to do with it, i have installed i will try
Click on the file twice to open it -it should open on it's own.
Then click Install, and that's it.
It's a custom font file which must be added to the default font files on your Windows system.
Don't install it on MT4!
.ex4/.ex5 files can't be fixed or modified / I'm not a coder!
  • #63,847
  • Oct 5, 2023 4:33pm Oct 5, 2023 4:33pm
Quoting BestTraderEv
{quote} Click on the file twice to open it -it should open on it's own. Then click Install, and that's it. It's a custom font file which must be added to the default font files on your Windows system. Don't install it on MT4!
Thank you for your help Sir, please kindly help this last one , am trying to move it to sub-window as attached image, i have applied the blank window, drag the indicator there but its not working, i have changed the number window 1-3 but indicator got missing
Attached Image (click to enlarge)
Click to Enlarge Name: FF.png Size: 16 KB
  • #63,848
  • Oct 5, 2023 4:35pm Oct 5, 2023 4:35pm
Quoting Samalin
{quote} Thank you for your help Sir, please kindly help this last one , am trying to move it to sub-window as attached image, i have applied the blank window, drag the indicator there but its not working {image}
Study the input parameters - it's all there.
You need to understand each of those parameters.
Unfortunately, this indicator can not load a preset file.
You need to figure out everything on your own.

This is my set:
Attached Image (click to enlarge)
Click to Enlarge Name: 2023-10-05_233813.jpg Size: 158 KB
.ex4/.ex5 files can't be fixed or modified / I'm not a coder!
  • #63,849
  • Oct 5, 2023 5:00pm Oct 5, 2023 5:00pm
Quoting newhope
...how to calculate the Arrow Distance above high or below low for Every TF , based on previous bars ?...currently i just use predefined ...value...3 pips etc...but it is not so clear if the candles are very small , the Arrow position is too far from top/bottom of bar, and some times we can not see it...
- fixed distance, as you've noticed a single value would either be too big for small tfs/candles and too close on large tf/candles
- variable based on recent candle sizes, as well as using lower anchor when above and upper anchor when below too
- - use iatr on some recent candles to give you an average candle size, then place the arrow price at some multiple of that from a candle's high/low
  • #63,850
  • Oct 5, 2023 5:04pm Oct 5, 2023 5:04pm
Quoting besttraderev
{quote} study the input parameters - it's all there. You need to understand each of those parameters. Unfortunately, this indicator can not load a preset file. You need to figure out everything on your own. This is my set: {image}
best advise and example, thanks very much, i got it right!!!
  • #63,851
  • Oct 5, 2023 5:04pm Oct 5, 2023 5:04pm
Quoting BestTraderEv
{quote}...I noticed one small thing: The little marker on the current High/Low is not deleted - stays there...
Yes, by design, it's an old indicator but I recall there was something about keeping a track when/where past alerts were. Though still manually deleteable, if I were making it again I may not have it or leave it as an option.
  • #63,852
  • Edited Oct 6, 2023 12:40am Oct 5, 2023 7:23pm | Edited Oct 6, 2023 12:40am
Quoting jeanlouie
{quote} - fixed distance, as you've noticed a single value would either be too big for small tfs/candles and too close on large tf/candles - variable based on recent candle sizes, as well as using lower anchor when above and upper anchor when below too - - use iatr on some recent candles to give you an average candle size, then place the arrow price at some multiple of that from a candle's high/low

Thanks for the idea JL,
how much bars is better we take for calculation here for iATR ?? is it include the last current bar too (bar i=0) ??
let's say we take last 16 bars for iATR, so we calculate : i=0, i=1, ... i=15 for ATR ??
edit: i think the multiply factor must be < 1, it is good enough...
  • #63,853
  • Oct 5, 2023 7:36pm Oct 5, 2023 7:36pm
Quoting newhope
{quote}...how much bars is better we take for calculation here for iATR ?...
Use your own discretion, it's just an easy way to get an average recent candle size. It's not something that is of much importance, a big count or small count, including the live candle or not, just get an average of some bunch of candles of a count you see fit.
  • #63,854
  • Oct 5, 2023 10:43pm Oct 5, 2023 10:43pm
Hi guys,
Would it be possible to add a pop up alert and an arrow to this TDI indicator, on the closed candle when the RED line #3 crosses above/below the 50 line, thanks
Attached File(s)
File Type: ex4 TDI-RT-Clone-PlusMA.ex4   17 KB | 407 downloads
File Type: mq4 TDI-RT-Clone-PlusMA.mq4   5 KB | 466 downloads
  • #63,855
  • Oct 5, 2023 11:37pm Oct 5, 2023 11:37pm
Quoting BestTraderEv
{quote} I can confirm. Everything is working fine on my charts. I noticed one small thing: The little marker on the current High/Low is not deleted - stays there - littler bugger! {image}
i remove the little bugger by turning this option false, that way after alert it will not print
Attached Image (click to enlarge)
Click to Enlarge Name: FF.png Size: 3 KB
  • #63,856
  • Oct 6, 2023 4:44am Oct 6, 2023 4:44am
Quoting devilnight4
{quote} hi sir can you programme indicator that when the candle close above the previous candle draw arrow sell and when it close under the previous candle draw arrow buy
Attached File(s)
File Type: mq4 Simple_Signal_Arrows_Alerts.mq4   7 KB | 651 downloads
.ex4/.ex5 files can't be fixed or modified / I'm not a coder!
  • #63,857
  • Edited 9:10am Oct 6, 2023 5:24am | Edited 9:10am
Hi is anybody willing to ad the pair (at its best with suffix for Indices also) and the timeframe where the alert is made to the alertsetting please? That means in the alert after up should it say m5 and the Pair. I hope it is clear what i try to say :-) sorry for my english
Attachment g


Attached File(s)
File Type: mq4 VOLUME.mq4   5 KB | 502 downloads


thank you in advance :-)
(.)(.) think first ...
  • #63,858
  • Oct 6, 2023 7:15am Oct 6, 2023 7:15am
Quoting BestTraderEv
{quote} MetaTrader 5 has M20 by default. MetaTrader 4 has M20 by custom indicator, or by Period Converter.
thanks so much
  • #63,859
  • Oct 6, 2023 7:30am Oct 6, 2023 7:30am
Quoting BestTraderEv
{quote} First, I can't read anything in this indicator. Whatever language the discriptions were written in, they show like this: {image} And I don't have a single idea what this is about. Same with texts for alerts. So, if you want me to study this indicator, I need something I can work with.
If understand sir why tell you sir
  • #63,860
  • Oct 6, 2023 9:02am Oct 6, 2023 9:02am
Quoting maximumguita
...ad the pair...timeframe where the alert is made...
Source of alert added, symbol and tf minutes.
Attached File(s)
File Type: mq4 VOLUME_mod.mq4   5 KB | 550 downloads
238 traders viewing now, 1 is registered: