I will code your EAs and Indicators for no charge | Page 2843 | Crypto Craft

Options

Go to
Permalinks
Print Thread

Similar Threads

I will code your pivot EAs for no charge 28 replies

I will code your scalping EAs for no charge 163 replies

Oanda MT4 - Indicators and EAs not showing 2 replies

EAs and indicators relating to moutaki... 22 replies

InterbankFX has loaded its MT4 platform with custom EAs, indicators and scripts 1 reply

Attachments: I will code your EAs and Indicators for no charge
Exit Attachments

I will code your EAs and Indicators for no charge

  • #56,841
  • Nov 28, 2022 8:36am Nov 28, 2022 8:36am
Quoting Trishana
{quote} I have tried this indi and found it repaints. It will send you a notification when a pattern is formed, but then price runs and that pattern becomes incorrect, it will clear itself on chart.
The teachings of Japanese Candlestick Patterns tell us that any pattern is valid when the price respects it.
The problem is with coding the "when the price respects it".
The indicator only detects the patterns as they appear, and deletes the signals when the given pattern is rejected.
The indicator can not delete alert messages.
They get deleted only by the MT4 rules.
.ex4/.ex5 files can't be fixed or modified / I'm not a coder!
  • #56,842
  • Nov 28, 2022 8:39am Nov 28, 2022 8:39am
Quoting BestTraderEv
{quote} New input for that. Just that you know, it is not possible to have an alert on Close. It is always when volume on the new Bar is >1. There is no such event as Bar Close or Bar Open. The Close price is the last price receiced from the broker's server - it has nothing to do with time, either. The Open Price is the first price received from the broker's server - it has nothing to do with time, either. The prices come in when they come in. {file}
many thanks for the quick response sir.
if you undo my changes and fix the alerts in your expert way, is it possible to get alerts on the bar close?

i just require alerts when the indicator line (rsioma) crosses levels 80 and 90 from above below and 10 and 20 from below above on gandle close.

the original indicator without any changes is here.....
Attached File(s)
File Type: mq4 rsioma_v3_alerts.mq4   13 KB | 373 downloads

Attached Image (click to enlarge)
Click to Enlarge Name: rsioma request 1.png Size: 5 KB
Attached Image (click to enlarge)
Click to Enlarge Name: rsioma request 2.png Size: 7 KB
thanks again
  • #56,843
  • Nov 28, 2022 8:47am Nov 28, 2022 8:47am
Quoting doerpn
Hello traders, have a big problem...which probably a lot of you have too: on my chart there are several indis and tools. To get a better overview I run charts of all instruments I want to trade at once. Depending on the indis loaded the screen freezes...very frustrating! {image} Now my question: Is there a tool, indicator or something else to measure how many % of the working memory consumes each of the attached indicators ? With this information I am able to eliminate the big one memory overeater and find another...
That's not so simple.
Basically you have the Task Manager in Windows, so theoretically you could load one indicator at a time adn observe what happens. But, the problem is not so simple. First, MT4 is a single thread program, so it realyy won't help how much memory you have or how many cores. Plus, it also depends on the volumes of ticks comming in at the specific time. Generally, the more charts you will have opened with all those indicators, the worst it is going to get.
You can try going to Tools -> Options -> Charts and limiting the Max bars values.
.ex4/.ex5 files can't be fixed or modified / I'm not a coder!
  • #56,844
  • Nov 28, 2022 8:53am Nov 28, 2022 8:53am
Quoting walvekarraje
{quote} many thanks for the quick response sir. if you undo my changes and fix the alerts in your expert way, is it possible to get alerts on the bar close? i just require alerts when the indicator line (rsioma) crosses levels 80 and 90 from above below and 10 and 20 from below above on gandle close. the original indicator without any changes is here.....{file} {image}{image} thanks again
Yeah I was going to comment that as a doctor you wouldn't take out the appendix to fix a toothache ... I hope?
This indicator does not provide this specific alert, but the solution is easy, just change the OBOS levels in the indicator!
If you are interested in the 70/30 scenario, you don't need the 90/10. You could simply change the 90/10 to 73/30 and you will get what you want. Unless your condition is that it must first be at 90/10 and then cross 70/30?
If it's already at 90/10, then what good is the 70/30?
I don't see the logic...
.ex4/.ex5 files can't be fixed or modified / I'm not a coder!
  • #56,845
  • Nov 28, 2022 9:15am Nov 28, 2022 9:15am
Quoting BestTraderEv
{quote} Yeah I was going to comment that as a doctor you wouldn't take out the appendix to fix a toothache ... I hope? This indicator does not provide this specific alert, but the solution is easy, just change the OBOS levels in the indicator! If you are interested in the 70/30 scenario, you don't need the 90/10. You coiuld simply change the 90/10 to 73/30 and you will get what you want.
agreed about the appendix and toothache

i am interested in 90/10 scenerio. unfortunately the indicator does not generate proper alerts. not for 70/30 neither for 90/10

secondly as you correctly said the the code is by Mladen (as i can see from the other rsioma indicators i have) but this version appears to be modified by someone with limited coding skills. his intent was good but probably he was not able to acheive it.( i might be wrong).

thirdly i find this indicator / oscillator the best of all i have used. i am using this without alerts with descently good results. with my daily schedule ( i am a cancer surgeon ) if i can get proper alerts, it will help me for trading as well. trading is my hobby, i am not a compulsive trader.

i will really appreciate any help.

thanks again.
  • #56,846
  • Nov 28, 2022 9:16am Nov 28, 2022 9:16am
Quoting Slingshots1
{quote} Search here try and go back to the page before this it's called Candlesticksignal
Thank you !!!
  • #56,847
  • Nov 28, 2022 9:32am Nov 28, 2022 9:32am
Quoting BestTraderEv
{quote} That's not so simple. Basically you have the Task Manager in Windows, so theoretically you could load one indicator at a time adn observe what happens. But, the problem is not so simple. First, MT4 is a single thread program, so it realyy won't help how much memory you have or how many cores. Plus, it also depends on the volumes of ticks comming in at the specific time. Generally, the more charts you will have opened with all those indicators, the worst it is going to get. You can try going to Tools -> Options -> Charts and...
Ah ok...thanks for the info......good idea...will try....
Have a nice day
  • #56,848
  • Nov 28, 2022 9:44am Nov 28, 2022 9:44am
Hi,
I want such an indicator or script which should show time passed in form of percentage. The indicator should have two inputs for setting Time duration. One input should as Starting Duration from and other one as Ending Duration On.
Examples:
Let's say set this duration
Starting Duration from=7:00
Ending Duration On=24:00

  1. Let’s say time right now is 7:00 so it should display this Time Passed 0 %
  2. If time is 8:00 then it should display this Time Passed 6 % (actual value is 5.88%, but round it off)
  3. Same way if time is 9:19 then it should display this Time Passed 14% (actual value is 13.627% but round it off)

My local time is GMT+5.
I will be very thankful to You

  • #56,849
  • Nov 28, 2022 9:47am Nov 28, 2022 9:47am
Quoting Samalin
Thank you for all your help in this thread, please i need help in advise or reference indicator, ADVICE-- can i realize this idea or am looking for the impossible? i am trying to make all indicators i use to be rigid, if indicator meet criteria i open a trade, so that i will not apply emotions or assumption, this particular indicator i plan to use for Timing is not specific in criteria, the attached image explains the situation, i supposed to buy from 20, if i make it 70/30 then i will be buying a sell market, i have tried every settings but this...
Of course there IS NO IDEAL indicator!
Did you know, that the indications of a specific indicator with the same settings will be different on each broker's quotations? And sometimes they can be very different!
Tell me, what good is any such indicator, if there is no set rules or no one market quotation (chart)?
This is all a big load of BullShit!!!!
.ex4/.ex5 files can't be fixed or modified / I'm not a coder!
  • #56,850
  • Edited 10:22am Nov 28, 2022 10:07am | Edited 10:22am
@BestTraderEv please can you help with a clock or stopwatch indicator?

For example, if the time is 8:00am, and I want the indicator to alert me by 9:00 am and every 15 minutes after

So the indicator will alert me by 9:00 am and then by 9:15, then 9:30, then 9:45 e.t.c

Thanks in advance
  • #56,851
  • Nov 28, 2022 10:24am Nov 28, 2022 10:24am
Quoting aslam239087
{quote} Hi Sir, Please sir please change EPL percentage with respect to Previous balance as I have shown in the attached image. {image}
Attached File(s)
File Type: ex4 AccountBalanceEquityChange.ex4   26 KB | 320 downloads
.ex4/.ex5 files can't be fixed or modified / I'm not a coder!
  • #56,852
  • Nov 28, 2022 10:31am Nov 28, 2022 10:31am
Quoting BestTraderEv
{quote} {file}
Hi Sir Thank you so much. It worked perfectly with no issue. I am very very thankful to you sir.

Sir can you please share with me the MT4 MQ4 file of this please?
  • #56,853
  • Nov 28, 2022 10:31am Nov 28, 2022 10:31am
Quoting VikThor1
Somebody can help me fix these indicators? It's the same indicator, but I'd like to use one of them as a higher timeframe confirmation. So I made a copy and give it higher inputs. When I attach both on the chart one of them don't show me the "HH,HL,LL,LH" signs. Is it possible to fix them? {file} {file}
You will only need one, just change the IndiID for the second instance.
Attached File(s)
File Type: mq4 ZigZag_HH-HL-LH-LL_HTF.mq4   49 KB | 398 downloads
.ex4/.ex5 files can't be fixed or modified / I'm not a coder!
  • #56,854
  • Nov 28, 2022 10:46am Nov 28, 2022 10:46am
Quoting aslam239087
Sir can you please share with me the MT4 MQ4 file of this please?
No.
.ex4/.ex5 files can't be fixed or modified / I'm not a coder!
  • #56,855
  • Nov 28, 2022 10:48am Nov 28, 2022 10:48am
Quoting Aghostinplai
@BestTraderEv please can you help with a clock or stopwatch indicator? For example, if the time is 8:00am, and I want the indicator to alert me by 9:00 am and every 15 minutes after So the indicator will alert me by 9:00 am and then by 9:15, then 9:30, then 9:45 e.t.c Thanks in advance
Why do you need an indicator for this?
Don't you have Alexa, or simply a smartphone, or just your computer will do that!

How about this?
https://www.mql5.com/en/market/produ....google.com%2F
.ex4/.ex5 files can't be fixed or modified / I'm not a coder!
  • #56,856
  • Nov 28, 2022 11:44am Nov 28, 2022 11:44am
Hi,
I want such an indicator which should show Total combined lot size of all the opened orders on chart in MT4.
Please make such an indicator which can do this task. I have zero knowledge about coding. I will be very thankful to you.
  • #56,857
  • Nov 28, 2022 11:46am Nov 28, 2022 11:46am
Quoting BestTraderEv
{quote} Button added! {file}
Thank you very much!!! You are the Best of the Best!!!!!!!!! God bless you!
  • #56,858
  • Nov 28, 2022 12:59pm Nov 28, 2022 12:59pm
Quoting BestTraderEv
{quote} You will only need one, just change the IndiID for the second instance. {file}
Sorry but I don't understand you.
I attached both indi on the chart and I only see signs from one of them.
If I attach the 'normal' on the chart, it shows HH LL etc.
But when I attach the second one, the first indi signs disapper. Only the line stay.
Do you mean I can use them in an EA? So just call the same indi again but with another timeframe?
My idea is to attach both in the EA and one of them has bigger values so it's a htf confirmation. But when I can't see them on the chart I don't know if the EA will read them.
Or when I use this code, just change both "0" to a "PERIOD" ?
Inserted Code
      name1 = "statusLabel"+TimeToString(Time[highindex]);
      if( ObjectFind(0,name1) == 0 && ObjectGetString(0,name1,OBJPROP_TEXT) == "HH" )
         {
          buysignal = true;
         }
Or call indi again and change zeroes to some PERIOD?
  • #56,859
  • Edited 1:49pm Nov 28, 2022 1:15pm | Edited 1:49pm
Quoting VikThor1
{quote} Sorry but I don't understand you. I attached both indi on the chart and I only see signs from one of them. If I attach the 'normal' on the chart, it shows HH LL etc. But when I attach the second one, the first indi signs disapper. Only the line stay. Do you mean I can use them in an EA? So just call the same indi again but with another timeframe? My idea is to attach both in the EA and one of them has bigger values so it's a htf confirmation. But when I can't see them on the chart I don't know if the EA will read them. Or when I use this...
This indicator uses two methods of plotting:
1. The ZZ Lines are buffer lines,
2. The HH, LL, HL, LH labels are drawing objects.

1. The buffer part is not sensitive to any names, so this part will be plotted independantly from 2 instances of the indicator, or any number of it on one chart.
2. The objects are name sensitive, so in order for those to be plotted independantly, they need to have different names in each of the instances of the indicator. That's the role of IndiID, to change their names. If they will have the same names, they will simply overwrite and we will only see one set of those labels.

Look into the code I gave you, you will see what I added.
The HH, LL, HL, LH are not object names, only their texts.
I did IndiID+"statusLabel" - so you need to be consistent in the EA.

It seems like you totally don't understand what you are doing!
It works like this:
You put this indicator on the chart, because you need to find the objects which plot the HH, LL, HL, LH labels.
You find them by their names.
You find them in a loop, so that's why you first define the names of the objects:
name1 = "statusLabel"+TimeToString(Time[highindex]);
If you want to use two instances of this indicator, you need to assign different names for those objects.
It would be a good idea if the InID was a code for the Tf you are using, or period.
So, if you are going to have 2 sets of these labels, you need to search them independantly.

You said that you made a copy of this indicator.
And I am saying that now you don't need a copy, you can use one copy in two instances.
You must give each instance a different IndiID - which mean the objects names will have this ID.
.ex4/.ex5 files can't be fixed or modified / I'm not a coder!
  • #56,860
  • Nov 28, 2022 1:31pm Nov 28, 2022 1:31pm
Quoting BOGAT
Hello, is it possible to make enable push and eMail alerts based on CLOSED CANDLE and colour change. Input triger would be just name of the colour, one for sell and one for buy. Based on BIONICS attached indicator, Results; First scenario - Triger(Blue) for = Msg(Sell), Nameofsecurity(), DateTime() Secon scenario - Triger(Yellow) for = Msg(Buy), Nameofsecurity(), DateTime() i have found just this part of code, maybe it can help you: ... if Open[2]<Close[2] // is 'up' bar, e.g. 'blue' else // is down bar, e.g. 'red' ... if Open[1]<Close[1] // is...


Do you have the mq4 file?
If not, nothing can be done, because this indicator doesn't even output any buffer data.

Sorry I dont˙t have mq4 file, I now that this can be best solution.
Is there any other way to recognize this colours of candelstic?

Franc
80 traders viewing now, 1 is registered:
yako47