I will code your EAs and Indicators for no charge | Page 2256 | Crypto Craft

Options

Go to
Permalinks
Print Thread

Similar Threads

I will code your pivot EAs for no charge 28 replies

I will code your scalping EAs for no charge 163 replies

Oanda MT4 - Indicators and EAs not showing 2 replies

EAs and indicators relating to moutaki... 22 replies

InterbankFX has loaded its MT4 platform with custom EAs, indicators and scripts 1 reply

Attachments: I will code your EAs and Indicators for no charge
Exit Attachments

I will code your EAs and Indicators for no charge

  • #45,101
  • Apr 6, 2021 11:33pm Apr 6, 2021 11:33pm
Quoting Slingshots1
{quote} Hi pls kindly share the indicators and template
here
Attached File(s)
File Type: zip 20210407 - bilal template.zip   653 KB | 1,030 downloads
"Exchange of hands"
  • #45,102
  • Apr 7, 2021 2:28am Apr 7, 2021 2:28am
Could someone add an option to only see the arrows when its crossed the overbought and oversold levels, thank you.
Attached File(s)
File Type: ex4 ZeroLag Stoch arrows alerts zone.ex4   35 KB | 443 downloads
  • #45,103
  • Apr 7, 2021 5:03am Apr 7, 2021 5:03am
Hello, would it be possible to add a few things to this EA as I have tested this manually and had very good results. I'll try my best to explain.

For example if I am in a buy with 1.00 lots then the trade goes against me for 50 pips, it will open a sell at 50 pips with the same lot size as my initial trade being 1.00. Then at -60 pips it adds to the sell side with 1.5x the initial trade, being 1.50. Then at -70 it adds to the sells again with 2x the initial trade being 2.00 lots. Then looking to take me out at any profit I set in the settings, either % of the account or actual amount I enter.

If price goes against me to activate any of the hedge levels, but doesn't go against me enough to get out with profit and then returns to my original entry, it will open a trade adding to the buy side at my initial entry, 10 and 20 pips past my initial entry level.

The hedge level positions go up in 0.5x. So for example if price goes against my buy and hits all 3 hedge levels (1x,1.5x,2x) at -50, -60 and -70 pips. If I it goes back to entry before being able to take me out for profit. The next hedge would be back at my initial entry with 2.5x and then 10 pips above entry with 3x, then 3.5x at 20 pips until the trade gets out with profit or breakeven. And then the same again if it doesn't get to profit and goes back down to my -50 hedge. Enter with 4x the initial trade and 4.5x at -60 and 5x at -70 if it it goes back down without getting me out with small profit from the buy side. Just repeating the cycle until coming out at breakeven or profit.

I hope this makes sense. It is very similar to zone recovery but scales in past the original 50 pips hedge level and the positions go up in 0.5x. If it is confusing I will try and show some pictures from back testing.

If this is possible, the next step would be to add entry criteria, so it is a fully automated EA and doesn't need a manual entry, but still allow me to use the recovery method with manual entries, by using comment '1' in the order if I want to. For automated trading, I would like it be using stochastic 5,3,3 setting on the 5m chart taking buys below 20 level and sells above 80, with the stochastic lines cross in the direction above/below the levels. But only to take trades in the same direction of the 50 EMA being above/below the 200 EMA on the 1HR chart. Hedge being at 50 pips, or if able to change it. Take profit being at 30 pips or being able to change in settings on the initial trade, until hits hedge level then removes TP and gets out all trades with small profit, the recovery take profit can be changed to % of my account or a certain amount.

If it is possible to enable/disable the hedge at entry once price has hit the initial hedge level and reversed without taking profit, but keep everything else the same that would be great. As I would like to use both depending on the situation. Thanks.
Attached File(s)
File Type: mq4 OGT Zone Recovery EA v1.5.mq4   49 KB | 487 downloads
  • #45,104
  • Apr 7, 2021 5:15am Apr 7, 2021 5:15am
Good Day all, please i will need the help and attention of Mntiwana and Jeanlouie

is it possible to make indicator that will alert on chart, any candlestick with Open and close on same price or close to close/open to open same price
any timeframe it happen

Screenshot attached
Attached Image (click to enlarge)
Click to Enlarge Name: JEL.png Size: 48 KB
  • #45,105
  • Edited 8:09am Apr 7, 2021 6:03am | Edited 8:09am
Quoting jeanlouie
{quote} It's a bit much for the time being.

Hi Jeanlouie,

Your Rectangle Ruler is KICK ASS !!!

I'm now understanding the true value of it...THANKS for the ruler.

I know you have a version that works on time, but not quite what I'm after. That one works on dates, so not repeating as a daily template.

Looking for Rectangular Ruler V1.2 to be able to load like the Box from Open indie, with a bit of a twist:
( see attachment for indie in question)

1...Keep the ruler parameters as is.

2...I need a new ruler every hour, ON the start of the new hour, and it must last for 55 minutes, or 55 candles on M1 chart.

3...Need 14 boxes in total, for 14hrs of trading, with the first one starting two hrs before London Open. Or if you want to put a MT4 start time in for Box1, and the rest just falls in after that, also fine.

4...Box need to open on middle, in other words 50 value, or level 5 in your indie.

5...Can be ultra helpful if level 2,5,8 can have line options ( 25, 50, 75). I have others in between, a distinction between these three and the others would be great. For example all others dots, these three solid< with 50 a nr2 solid, something like that would be PERFECT)
This point 5 not the end of the world if not happening.

6...If its easy for you just to make one version, and I must load it many instances myself to generate my template, also cool.
If you feel this might eat CPU / Ram / whatever, and feel its better to put all 14 in one indicator....any which way, I am greatful.

7...This new version I'm asking for here, must not mix with the existing V1.2, both need to operate on the same template.
Reason is at times during the day, PA moves out of the hour box, higher or lower, I need to have the option then to use V1.2 to stack another box where needed, top or bottom.

PLEASE help me on this one, loading each new hour another box, takes too much time for a lazy confused trader just sitting in his chair...bwahahahaha!!!
( sometimes makes me miss an entry, as I play a fast game on M1 charts)

Kind Regards.
Attached File(s)
File Type: ex4 Rectangle_Ruler_bars_durations_pips_ranges_v1.2.ex4   51 KB | 484 downloads
  • #45,106
  • Apr 7, 2021 8:21am Apr 7, 2021 8:21am
Quoting jeanlouie
{quote} Those are made to be draggble, not fixed. This is 1 box per loading, input start and end time {image} {file}
Hi jeanlouie,

Is it possible to collect statistics for a day or less for
1 trending direction
2.reversal direction

based on
TF
Minimum threshold Pip size of closed candle in trending
Maximum threshold Pip size of closed candle for reversal or correction
Practice makes a person perfect
  • #45,107
  • Apr 7, 2021 9:23am Apr 7, 2021 9:23am
Quoting JamesAH
Hello, would it be possible to add a few things to this EA...For example if I am in a buy with 1.00 lots then the trade goes against me for 50 pips, it will open a sell at 50 pips with the same lot size as my initial trade being 1.00. Then at -60 pips it adds to the sell side with 1.5x the initial trade, being 1.50. Then at -70 it adds to the sells again with 2x the initial trade being 2.00 lots. ...If this is possible, the next step would be to add entry criteria, so it is a fully automated EA...
Quote
would it be possible to add a few things to this EA
Yes it's possible. If no one here decides to do that 500+word request, go to the thread you got it from, zone recovery? and ask the author to do all these changes for you for no charge.

Quote
For example if I am in a buy with 1.00 lots then the trade goes against me for 50 pips, it will open a sell at 50 pips with the same lot size as my initial trade being 1.00. Then at -60 pips it adds to the sell side with 1.5x the initial trade, being 1.50. Then at -70 it adds to the sells again with 2x the initial trade being 2.00 lots.
Martingale and/or grid systems are not profitable in the long run, no efficiency is being extracted from the market, adjustments in position sizing only speed up or delay the time to ruin.
  • #45,108
  • Apr 7, 2021 9:51am Apr 7, 2021 9:51am
Can/will some coder add an On/Off button to this indicator ?
Attached File(s)
File Type: mq4 HalfTrend-1.02.mq4   6 KB | 447 downloads
  • #45,109
  • Apr 7, 2021 10:00am Apr 7, 2021 10:00am
Quoting BitcoinBoff
{quote} ...
Quote
.I need a new ruler every hour, ON the start of the new hour, and it must last for 55 minutes, or 55 candles on M1 chart.3...Need 14 boxes in total,
With the panel on, you can make as many as you want, I wont automate this.

Quote
5...Can be ultra helpful if level 2,5,8 can have line options ( 25, 50, 75). I have others in between, a distinction between these three and the others would be great. For example all others dots, these three solid< with 50 a nr2 solid, something like that would be PERFECT)
This point 5 not the end of the world if not happening.
If I did it then it'd have to be for all 10, just just 3, and I'm not going to put 10 individual color-width-style options, and I'm not going to put just 3 either because would take the same time anyway, they're intended to be uniform styling but their levels at any %.

Quote
6...If its easy for you just to make one version, and I must load it many instances myself to generate my template, also cool.
Ruler thing by time will do that https://www.forexfactory.com/thread/...0#post13469820 , but its fixed time

Quote
PLEASE help me on this one, loading each new hour another box, takes too much time
Use the panel and make as many as you want just by clicking
As it is now for what it does, I think it's sufficient, and is already inclusive of functional updates
  • #45,110
  • Apr 7, 2021 10:02am Apr 7, 2021 10:02am
Quoting simnz
{quote} Hi jeanlouie, Is it possible to collect statistics for a day or less for 1 trending direction 2.reversal direction based on TF Minimum threshold Pip size of closed candle in trending Maximum threshold Pip size of closed candle for reversal or correction
Yes but it doesn't sound straight forward to do.
  • #45,111
  • Apr 7, 2021 2:00pm Apr 7, 2021 2:00pm
Quoting jeanlouie
{quote} {quote} With the panel on, you can make as many as you want, I wont automate this. {quote} If I did it then it'd have to be for all 10, just just 3, and I'm not going to put 10 individual color-width-style options, and I'm not going to put just 3 either because would take the same time anyway, they're intended to be uniform styling but their levels at any %. {quote} Ruler thing by time will do that https://www.forexfactory.com/thread/...0#post13469820 , but its fixed time {quote} Use the panel and make as many as you...


Thank you,

Understood all of it.

Just one question :

On the Ruler Box by Time Indicator.
It has a date in its parameters also, so I take it, it will just do its thing for the date specified, and will not repeat the following days ?
Any chance you can remove the date function, just have the start & end time function, will it then repeat daily ?

Hope its possible and an easy task

Kind Regards
  • #45,112
  • Apr 7, 2021 2:06pm Apr 7, 2021 2:06pm
Quoting jeanlouie
{quote} Yes but it doesn't sound straight forward to do.
hi jeanlouie. so what i mean is if the blue and red lines could adjust at the same time and length of the rect end so that they are not visible to the left and right of the rectangle. so they are the same length as the box.

if the take profit, open and stop loss text could be adjustable so that it can be placed in the middle or the right of the box.

and if its possible. a hide/show button so we can make the box and the 3 lines and text invisible when we want....thanks for your help....
Attached Image (click to enlarge)
Click to Enlarge Name: 2021-04-07_200638.jpg Size: 452 KB
If at first you don't succeed, try, try again.
  • #45,113
  • Apr 7, 2021 2:52pm Apr 7, 2021 2:52pm
Quoting vinscal
{quote} Hi Bluerain/Jeanlouie can you please help on this request for an indicator to show open=high condition satisfied symbols from marketwatch once market opens {image}
Hi Jeanlouie

can you please check on this request .. indicator to show open=high list
  • #45,114
  • Apr 7, 2021 5:42pm Apr 7, 2021 5:42pm
Question to the Master Coders:

Is it possible to open & close an indicator subwindow from a On/Off Button on the main chart ?

If yes, which instruction code must be included in the Button ?
  • #45,115
  • Apr 7, 2021 10:13pm Apr 7, 2021 10:13pm
Hello friend.. I have a pine script code.. 3 ema crossover k want convert this strategy into mt4 language. I want test larger data that's reason plz help me out...

//@version=3
strategy("3 MAcross_alert", shorttitle="MAcross_Alert", overlay=true)
EMA_Fast =input(4, minval=1) // To input period for 1st sma, default period set as 10
EMA_Medium =input(9, minval=1)
EMA_Slow =input(18, minval=1)
s1=ema(close,EMA_Fast) // sma values stored in s1 and s2 variables
s2=ema(close,EMA_Medium)
s3=ema(close,EMA_Slow)
plot(s1, color=red,linewidth=2) // Plots the MA
plot(s2, color=yellow,linewidth=2)
plot(s3, color=green,linewidth=2)
long= crossover(s1,s3) and s1 > s2// Define our buy/sell conditions, using pine inbuilt functions.
short= crossunder(s1,s3) and s1 < s2
exitLong = crossunder(s1,s2)
exitShort = crossover(s1,s2)
strategy.entry("long",strategy.long,when=long) // Buys when buy condition met
strategy.close("long",when=exitLong)
strategy.entry("short",strategy.short, when = short ) // Closes position when sell condition met
strategy.close("short",when=exitShort)
  • #45,116
  • Apr 7, 2021 11:02pm Apr 7, 2021 11:02pm
Please can you help me code a simple risk to reward tool, like the one tradingview uses.
Attached Image (click to enlarge)
Click to Enlarge Name: 0ea9acfa5cafdc3d1d7cc31e06351723.png Size: 6 KB
  • #45,117
  • Apr 8, 2021 1:56am Apr 8, 2021 1:56am
Sorry.....there you go
Attached File(s)
File Type: ex4 RiskReward_Ratio_v0_1 (1)_2.ex4   22 KB | 521 downloads
File Type: mq4 RiskReward_Ratio_v0_1 (1)_2.mq4   13 KB | 576 downloads
If at first you don't succeed, try, try again.
  • #45,118
  • Apr 8, 2021 2:00am Apr 8, 2021 2:00am
Quoting rosypips
Please can you help me code a simple risk to reward tool, like the one tradingview uses. {image}
Hi.
I found this, but I don't use it.....
Attached Image (click to enlarge)
Click to Enlarge Name: 2021-04-08_085936.png Size: 19 KB
Attached File(s)
File Type: ex4 RiskReward_Ratio_TradingView_like_v0.1j (1).ex4   25 KB | 480 downloads
File Type: mq4 RiskReward_Ratio_TradingView_like_v0.1j (1).mq4   20 KB | 613 downloads
  • #45,119
  • Apr 8, 2021 4:06am Apr 8, 2021 4:06am
Quoting John4y
Question to the Master Coders: Is it possible to open & close an indicator subwindow from a On/Off Button on the main chart ? If yes, which instruction code must be included in the Button ?
Hi

Try this one here.

Cheers / Mos
Don't limit yourself!!
  • #45,120
  • Apr 8, 2021 6:06am Apr 8, 2021 6:06am
Quoting vinscal
{quote} Hi Jeanlouie can you please check on this request .. indicator to show open=high list
I wont be taking it up, but you may be able to find it or something like it or ask elsewhere too
97 traders viewing now, 2 are registered:
,
Themba312