I will code your EAs and Indicators for no charge | Page 1995 | Crypto Craft

Options

Go to
Permalinks
Print Thread

Similar Threads

I will code your pivot EAs for no charge 28 replies

I will code your scalping EAs for no charge 163 replies

Oanda MT4 - Indicators and EAs not showing 2 replies

EAs and indicators relating to moutaki... 22 replies

InterbankFX has loaded its MT4 platform with custom EAs, indicators and scripts 1 reply

Attachments: I will code your EAs and Indicators for no charge
Exit Attachments

I will code your EAs and Indicators for no charge

  • #39,881
  • Oct 1, 2020 4:36pm Oct 1, 2020 4:36pm
Quoting mntiwana
{quote} "RSI averages + Bollinger bands & lines + alerts + arrows mtf" "Why does this indicator's graph/chart" There can be any reason from many,every code and coder work differently,math calculation different and so on a long list Here is one of Mladen's extremely extended ver of rsi bollinger band or bb rsi - a user can choose any average method for rsi and any for bands - a kind of Unique RSI with BB including it supports universal setting,means once adjusted at any TF,it will be work same equally on any next higher TF,no needs to readjusting,a...
Thanks for the detailed explanation, really appreciate it.
  • #39,882
  • Oct 1, 2020 5:18pm Oct 1, 2020 5:18pm
Quoting lucky1359
{quote} Dear BlueRain, Very nice work. There is a great demand for an indicator as quoted by classy also {image} 1. Options of how many days required 2. open to close color if positive then Green and if negative then red 3. The main and the important part which is required is [ Option of difference of 4 Hour Also ] If we can have the option of different time if would be good but specially 4 hour. I have seen your PIPMOVEDMTF which is excellent and of great help but if you make an indi as requested in the pic it would be great. thanks in advance...
Not sure what is the use but here you have it.
You can select any time frame and any number of bar for this indicator.

Attached Image (click to enlarge)
Click to Enlarge Name: PipMovedHLOC H4.JPG Size: 48 KB
Attached Image (click to enlarge)
Click to Enlarge Name: PipMovedHLOC D.JPG Size: 39 KB
Attached File(s)
File Type: mq4 PipMoved HLOC mtf.mq4   21 KB | 453 downloads
  • #39,883
  • Oct 1, 2020 5:26pm Oct 1, 2020 5:26pm
Quoting rpasupathy
Hi BlueRain Sorry to bother you again .... Just a small request : Dont need the BB Settings in the below condition... BUY : 1. 6EMA>14EMA>28EMA AND CANDLE Should CLOSE ABOVE ALL THESE. vice versa for sell. I have attached the same Indicator which you posted ... Thanks a lot for your valuable time ... Thanks {file}
Removed BB now and added candle close conditons.

bar 1 is below 6 ema and bar 0 is above 6 ema.
Attached File(s)
File Type: mq4 Candle_MA_Crossing_Alert .mq4   12 KB | 453 downloads
  • #39,884
  • Oct 1, 2020 5:27pm Oct 1, 2020 5:27pm
Quoting jeanlouie
{quote} The alert indicator will remain purpose built for alerts only. What's wrong with adding alerts on the fib levels indicator you have? {quote} You know how to sweet talk a hobbyist.
Hi Jeanlouie please i need a little modification for Period_MTF_Direction v lines i use it on daily and weekly, kindly help to add 3horizontal lines to indicate STOP LOSS ENTRY AND TAKE PROFIT
at the beginning of each week just like the one you did on Rsi-Scissors. Stop loss will be at the bottom of the daily candle for the week beginning the vertical line will be blue entry will be at the opening of the second daily candle of the week and take profit will be set just like that of the scissors.
  • #39,885
  • Oct 1, 2020 5:51pm Oct 1, 2020 5:51pm
Sorry the attachment
Attached Image (click to enlarge)
Click to Enlarge Name: RSI SCISSORS.PNG Size: 55 KB
Attached File(s)
File Type: ex4 Period_MTF_Direction_VLines.ex4   23 KB | 581 downloads
File Type: ex4 RSI_Scissor_wAlert+MA_Channel_color.ex4   43 KB | 561 downloads
  • #39,886
  • Oct 1, 2020 5:56pm Oct 1, 2020 5:56pm
Quoting slingshots1
sorry the attachment {image} {file} {file}
Attached Image (click to enlarge)
Click to Enlarge Name: JLOUIE BUY.PNG Size: 64 KB
  • #39,887
  • Oct 1, 2020 6:15pm Oct 1, 2020 6:15pm
To whom it may concern

"
Scope of Work
Combining BRI and TMA Double Band Indicators into one indicator, along with other modifications to alerts and other functionality.
The idea of the indicator
The BRI Indicator was developed to identify Imbalances in the market made by the banks manipulating the market. The TMA Double band identifies areas of overbought and oversold areas including determining the current timeframe trend using the centerline of the indicator. I would like to combine these indicators into one indicator, modify the alerts, clean up the code to prevent high CPU usage, and possibly clean up any duplicate similar inputs in both indicators.
Alert functions
I would like to remove and re-code the alert functions of the indicator once combined. I would like to add the following alert functions if possible.

 

  1. Imbalance Alert- This alerts the trader that an imbalance has formed on the chart.

This alert will have certain requirements to trigger. Below is the requirement for a Buy Alert (Sell alerts will be the opposite):

  1. The candle causing Imbalance Line must close below the TMA Centerline.
  2. The Imbalance Line color must be Blue.
  3. The TMA Centerline must be blue at the candle close

All 3 must be true or the alert is not sent. Below is a pic of when an Imbalance Alert should trigger.
"
--------------------
Simply want to know,if you agree with "centered TMA Bands" (repainter)

Attached Image (click to enlarge)
Click to Enlarge Name: EURUSDH1.png Size: 35 KB
  • #39,888
  • Oct 1, 2020 6:42pm Oct 1, 2020 6:42pm
Quoting jeanlouie
{quote} This should do it; Day, Week, Month Open Lines - for day, week n month - draws a line from the open, option to ray right - optional day start hour - number of periods to look back - color choice for first, and all others - can opt for gradient color to the first color {file} {image}
my humble request all master coder please add option to hours/day/week/month high-low -close -middle horizontal line like open lines along with time frame show on/off options so we can see /check all very very important level together in one indicator without clutter our chart. i hope it will be grate tool for any trader .thanks in advance.
Say something meaningful or Silence!!
  • #39,889
  • Oct 1, 2020 6:46pm Oct 1, 2020 6:46pm
Quoting BlueRain
{quote} Your are welcome.
dainel my friend, you are always so generous and helpful person .May God bless you and your family.
Say something meaningful or Silence!!
  • #39,890
  • Oct 1, 2020 7:37pm Oct 1, 2020 7:37pm
Quoting BlueRain
{quote} Removed BB now and added candle close conditons. bar 1 is below 6 ema and bar 0 is above 6 ema. {file}
Thanks a lot my friend ...

Will check out and let you know ...

Take care
The One Who Makes The Thunder Roar Also Hears A Butterfly Sigh - Ruzbeh
  • #39,891
  • Oct 1, 2020 8:17pm Oct 1, 2020 8:17pm
Quoting SwingMan
{quote} There is a misunderstanding, and one should describe very precisely what it is about, otherwise you lose the time for programming in vain ... I post here what I have imagined, further can you make changes. The problem is that what you call 61.8 is not clear what this is. In the indicator you have the parameter "Periode = 61.8" and this has nothing to do with the distance between the HighLow lines. The parameter is only the period of (rounded down) 61 bars for which one calculates the mean value of HiLo lines. extern double Periode = 61.8;...
is it possible to code/modify to just high low middle as horizontal line with specific candle number so chart will not clutter please
Say something meaningful or Silence!!
  • #39,892
  • Oct 1, 2020 9:18pm Oct 1, 2020 9:18pm
This is probably the simplest EA request ever, I have searched for this but cannot find exactly what I am looking for, if it is out there somewhere my apologies please point me in the right direction. This should be simple enough to be appropriate to post here, if not let me know.

I want the EA to place an order of my choosing, either buy or sell, at the opening of the next candle on the active chart regardless of timeframe. I only want it to place one order, not a new order at every candle in case I forget to turn it off. I could reset or delete and reattach each time I want a new order. I need to be able to specify the lot size and a magic number so this specific trade can be managed with another EA. It would do this once for each chart it was attached to, so for example if I had this attached to EURUSD M5 and USDCHF M5, one trade each would open at the opening of the next bar for a total of 2 trades.

No other conditions are needed to open the order, simply buy or sell if I have it turned on at the open of the next candle, that's it.

Thanks,

JW
  • #39,893
  • Oct 1, 2020 10:37pm Oct 1, 2020 10:37pm
Quoting jwpdad
This is probably the simplest EA request ever, I have searched for this but cannot find exactly what I am looking for, if it is out there somewhere my apologies please point me in the right direction. This should be simple enough to be appropriate to post here, if not let me know. I want the EA to place an order of my choosing, either buy or sell, at the opening of the next candle on the active chart regardless of timeframe. I only want it to place one order, not a new order at every candle in case I forget to turn it off. I could reset or delete...
You asked, and here is "Simple Candle Open EA" -
I removed most of features that typical EA has ..

You select direction and EA will open a trade based on direction when new candle open.
Attached File(s)
File Type: mq4 Simple Candle Open EA.mq4   11 KB | 468 downloads
  • #39,894
  • Oct 1, 2020 10:41pm Oct 1, 2020 10:41pm
Quoting BlueRain
{quote} You asked, and here is "Simple Candle Open EA" - I removed most of features that typical EA has .. You select direction and EA will open a trade based on direction when new candle open. {file}
Thank you so much for the fast reply, I will test this and report back.
  • #39,895
  • Oct 1, 2020 11:36pm Oct 1, 2020 11:36pm
Quoting jwpdad
This is probably the simplest EA request ever, I have searched for this but cannot find exactly what I am looking for, if it is out there somewhere my apologies please point me in the right direction. This should be simple enough to be appropriate to post here, if not let me know. I want the EA to place an order of my choosing, either buy or sell, at the opening of the next candle on the active chart regardless of timeframe. I only want it to place one order, not a new order at every candle in case I forget to turn it off. I could reset or delete...
Hi, perhaps you have looked in the wrong place regarding an EA. You have also not specified on the selection of direction.
It sounds like you need to use a script, well 2 actually. One executing for buys and another for sells that waits until the next bar, places the order and removes itself. No worries to forget leaving it attached as scripts do not remain attached after platform is closed.
That way you get to decide your direction as you write "to place an order of my choosing".
Have a search for buy/ sell scripts with execution delay until next bar. Could help with making sure the input window appears if you find a suitable script so that you can input your required lot size and magic number.

Hope that helps
"Work hard, put in the effort, and follow your dreams..." -Me
  • #39,896
  • Oct 1, 2020 11:43pm Oct 1, 2020 11:43pm
Quoting BlueRain
{quote} Removed BB now and added candle close conditons. bar 1 is below 6 ema and bar 0 is above 6 ema. {file}
Hi BlueRain,

A couple of things are missing in the Indicator ... Maybe I didnt explain it properly.... I have attached a picture to explain it ...

Additions :

1. All EMA's lined up.

2. The candle MUST touch all the three EMA's.

3. The candle MUST close above the EMA's.

Need pop up alert with arrow when the candle closes with all the 3 conditions satisfied.

Note : Sometimes the EMA's can be same. For Instance see the attached pic : 6 EMA was 135.866 , 14 EMA was 135.866 and 28 EMA was 135.874. This can be accepted for SELL. We can use > ( greater than or less than ) or = ( equal ) in the condition.

Thanks a lot for your time ...

Attached File(s)
File Type: mq4 Candle_MA_Crossing_Alert .mq4   12 KB | 645 downloads



Attached Image (click to enlarge)
Click to Enlarge Name: MA.JPG Size: 100 KB


Attached Image
The One Who Makes The Thunder Roar Also Hears A Butterfly Sigh - Ruzbeh
  • #39,897
  • Oct 1, 2020 11:54pm Oct 1, 2020 11:54pm
Quoting jeanlouie
{quote} The alert indicator will remain purpose built for alerts only. What's wrong with adding alerts on the fib levels indicator you have? {quote} You know how to sweet talk a hobbyist.
Hello Dear Jeanlouie,

My Purpose is being solved by the Alert indicator and really it is very good .

And about the Sweet talk i always quoted for you " If we had your Brains we would be in a different world for sure "

But i still insist the hobbyist in you to be the 1st person to make a great fibo

thanks & regards
  • #39,898
  • Edited 12:47am Oct 2, 2020 12:04am | Edited 12:47am
Quoting rpasupathy
{quote} Hi BlueRain, A couple of things are missing in the Indicator ... Maybe I didnt explain it properly.... I have attached a picture to explain it ... Additions : 1. All EMA's lined up. 2. The candle MUST touch all the three EMA's. 3. The candle MUST close above the EMA's. Need pop up alert with arrow when the candle closes with all the 3 conditions satisfied. Note : Sometimes the EMA's can be same. For Instance see the attached pic : 6 EMA was 135.866 , 14 EMA was 135.866 and 28 EMA was 135.874. This can be accepted for SELL. We can use > (...
Let;s make clear the rule this time.

Buy Signal:

(Close[0] > EMA6) && //candle Close is above EMA6
(EMA6 < High[0])&& (EMA14 > Low[0] ) && //emas are in the candle length
( EMA6 >= EMA14 ) && ( EMA14 >= EMA28) //EMA6>= EMA14>= EMA28

Sell signal:

(Close[0] < EMA6) && //candle Close is below EMA6
(EMA6 > Low[0])&& (EMA14 < High[0] ) && //emas are in the candle length
( EMA6 <= EMA14 ) && ( EMA14 <= EMA28) //EMA6<= EMA14 <= EMA28

Right?
Attached File(s)
File Type: mq4 Candle_MA_Crossing_Alert 1.1.mq4   12 KB | 464 downloads
  • #39,899
  • Oct 2, 2020 12:32am Oct 2, 2020 12:32am
Quoting BlueRain
{quote} I made that space as fixed and adjustable as option. Hope this solves problem. {file}
No Mate, you did the opposite what I wanted.
You modified the code of this indicator. I don't want that.
I want modification in FX_SCANNER indicator's time remaining code (its replacement with the code [looks code] you use in candletimeMTF indiator)
  • #39,900
  • Oct 2, 2020 12:42am Oct 2, 2020 12:42am
Quoting BlueRain
{quote} Let;s make clear the rule this time. Buy Signal: (Close[0] > EMA6) && //candle Close is above EMA6 (EMA6 < High[0])&& (EM24 > Low[0] && //emas are in the candle length ( EMA6 >= EMA14 ) && ( EMA14 >= EMA28) //EMA6>= EMA14>= EMA28 Sell signal: (Close[0] < EMA6) && //candle Close is below EMA6 (EMA6 > Low[0])&& (EM24 < High[0] && //emas are in the candle length ( EMA6 <= EMA14 ) && ( EMA14 <= EMA28) //EMA6<= EMA14 <= EMA28 Right? {file}

The conditions look perfect ....

Like to see in the charts where it gives the arrows and alerts ...

I am not able to attach the indicator to the charts .... When I compile it, I get 12 errors...

Thanks a lot
The One Who Makes The Thunder Roar Also Hears A Butterfly Sigh - Ruzbeh
107 traders viewing now, 2 are registered:
,
BestTraderEv