I will code your EAs and Indicators for no charge | Page 1738 | Crypto Craft

Options

Go to
Permalinks
Print Thread

Similar Threads

I will code your pivot EAs for no charge 28 replies

I will code your scalping EAs for no charge 163 replies

Oanda MT4 - Indicators and EAs not showing 2 replies

EAs and indicators relating to moutaki... 22 replies

InterbankFX has loaded its MT4 platform with custom EAs, indicators and scripts 1 reply

Attachments: I will code your EAs and Indicators for no charge
Exit Attachments

I will code your EAs and Indicators for no charge

  • #34,741
  • May 6, 2020 6:05am May 6, 2020 6:05am
Quoting slingshots1
{quote} the actual modification needed br is only alert so that when a trade is in the making the alert should give early entry ,stop and tp... Just as it appears on chart,if an arrow input could be added its okay.so that when the info is displayed on chart a signal arrow with alert should appear on the signal candle however i also searched through my archive and came across the blackdog arrow which should be okay the only further adjustment is the entry point and take profit distance .see the attached screenshot {image}
thanks a lot slingshots1

this .ex4 file stopped working on my system can you plz help
Attached File(s)
File Type: ex4 Greenfire Target(2).ex4   14 KB | 552 downloads
  • #34,742
  • May 6, 2020 6:09am May 6, 2020 6:09am
Quoting slingshots1
{quote} the actual modification needed br is only alert so that when a trade is in the making the alert should give early entry ,stop and tp... Just as it appears on chart,if an arrow input could be added its okay.so that when the info is displayed on chart a signal arrow with alert should appear on the signal candle however i also searched through my archive and came across the blackdog arrow which should be okay the only further adjustment is the entry point and take profit distance .see the attached screenshot {image}
one more request if you can
i have this indicator which not works in all scripts you plz check if possible any modification
because it looks good on chart
Attached Image (click to enlarge)
Click to Enlarge Name: 1.jpg Size: 204 KB
Attached File(s)
File Type: ex4 JUKE.ex4   65 KB | 563 downloads
  • #34,743
  • May 6, 2020 6:26am May 6, 2020 6:26am
Hello fellow traders.

I am looking for a EA that would place a buy stop and a sell stop at the close of specific H1 candles (not every candle, but at specific time of the broker ex.: 09:00; 13:00; 16:00 etc).

  1. *Buy stop higher than the high of the candle and sell stop below the low of the candle by "X" (customizable) pips (ex: 50, 70).

(This one may be a bit tricky because if the previous candle closes at the low or high, the market may not accept the pending order.)

  1. All orders must have a Stop Loss of "Y" (customizable) pips.
  2. Lot size of "Z" (manual entry).
  3. (I wouldn't use a TP since I close my orders manually, but someone may find benefit if there was this option).
  4. It would be nice if was possible to add an "expiration time" for the orders or a funtion to delete previous pending orders before adding new ones (so they wouldn't overlap).



I wasn't able to find such EA and since conding for me is alien I request your help.

I am very grateful in advance.

Hope you all are healthy and safe.

  • #34,744
  • May 6, 2020 6:26am May 6, 2020 6:26am
Quoting francisfree
{quote} thanks a lot slingshots1 this .ex4 file stopped working on my system can you plz help {file}
Cant be done with ex.file .just like BlueRain said and i have no coding experience its gurus like BR that can help out here.
  • #34,745
  • May 6, 2020 6:33am May 6, 2020 6:33am
Quoting Slingshots1
{quote} Cant be done with ex.file .just like BlueRain said and i have no coding experience its gurus like BR that can help out here.
OK THANKS
  • #34,746
  • May 6, 2020 6:39am May 6, 2020 6:39am
Quoting francisfree
{quote} one more request if you can i have this indicator which not works in all scripts you plz check if possible any modification because it looks good on chart {file} {image}

Which time frame works better this indicator ?
  • #34,747
  • May 6, 2020 6:44am May 6, 2020 6:44am
Quoting Luciano26
{quote} Which time frame works better this indicator ?
the person from whom i bought he said, it will work only in banknifty which is indian equity index
so maybe some problem because in others it doesnt work smoothly
  • #34,748
  • May 6, 2020 6:48am May 6, 2020 6:48am
Quoting francisfree
{quote} the person from whom i bought he said, it will work only in banknifty which is indian equity index so maybe some problem because in others it doesnt work smoothly

Alright understood mate, thanks for reply
  • #34,749
  • May 6, 2020 6:56am May 6, 2020 6:56am
Quoting BlueRain
{quote} Added alerts options - including popup, email, push, and sound It seems there is option that enable "no repaint" - you may enable that one for no repaint if that works. if( NoRepaint ) // only draw extreme when it is not going to be repainted (WILL in troduce a lag) draw( lineType, hiExtremeIdx, LINE_VALUE_UP ); if( drawStableLine( lineType, hiExtremeIdx, LINE_VALUE_FLAT ) ) // this spike will not repaint alert( ALERT_STABLE, lineType, hiExtremeIdx ); {file}

Good day BlueRain, was monitoring the changes an it looks good, I have another request, is it possible that the Fakeout noise not to give alerts, and with the Major Detection color reversals, would you be able to to add a buy and sell signal alerts aswel please.

Once again I highly appreciate your work
Attached Image (click to enlarge)
Click to Enlarge Name: IMG_20200506_130531.png Size: 50 KB
  • #34,750
  • May 6, 2020 7:56am May 6, 2020 7:56am
Quoting Quin007
{quote} Good day BlueRain, was monitoring the changes an it looks good, I have another request, is it possible that the Fakeout noise not to give alerts, and with the Major Detection color reversals, would you be able to to add a buy and sell signal alerts aswel please. Once again I highly appreciate your work {image}
Oh I didn't see BlueRain post it seems that him was already working on it, sorry!
I have uploaded a few posts ago a version that reads both buffers (spike and color line) and only then sends the alert/notification
The issue is that when both buffers appear maybe you are 5 or more bars ago, that's why I created a function to specfy the bars lookback limit
Attached File(s)
File Type: mq4 extreme_spike+alerts&notifications.mq4   13 KB | 575 downloads
The only secret to success is never giving up
  • #34,751
  • May 6, 2020 8:40am May 6, 2020 8:40am
Quoting BlueRain
{quote} there was a bug.. please use this latest already fixed. Basically, it should have checked != but it checked > ( greater ). https://www.forexfactory.com/showthr...8#post12919178 Please note that this !24Arrow is just ZigZag and it will repaint with a lot of false alerts.
Hi BlueRain, could you code an EA based on Stoch cross signal? When lines from Stoch cross depending on if the K is above or Below D, with take profit on 50 pips
  • #34,752
  • May 6, 2020 10:59am May 6, 2020 10:59am
Hello there,

It seems that sometimes two buffers are not enough, in some signals (when seem more reliable) another third buffer appears at same time or on the previous candle, so I added another filter called "OnlySecureSignals" (Altought they are not ) to only alert on those cases

take care
Attached File(s)
File Type: mq4 extreme_spike+alerts&notifications v.0.2.mq4   15 KB | 608 downloads
The only secret to success is never giving up
  • #34,753
  • May 6, 2020 11:04am May 6, 2020 11:04am
Quoting redfan
{quote} THIS IND PUT 3 PAIR ON ONE CHART HERE A PICTURE {image} {file}
Thx Redfan, this is a good beginning.
i found SecondChart.mq4 soure code.
hope someone can make indicator,
for timeframe "triple screen trading" concept.
Attached Image (click to enlarge)
Click to Enlarge Name: mini+chart+1-640w.png Size: 41 KB
Attached File(s)
File Type: mq4 SecondChart.mq4   10 KB | 639 downloads
  • #34,754
  • May 6, 2020 11:31am May 6, 2020 11:31am
trying to upload an indicator and when I click on upload from device nothing happens. help please
  • #34,755
  • May 6, 2020 11:33am May 6, 2020 11:33am
Quoting Bazzza
trying to upload an indicator and when I click on upload from device nothing happens. help please

I experienced the same, trying from my laptop but I used my mobile an it worked, try mobile buddy
  • #34,756
  • May 6, 2020 11:53am May 6, 2020 11:53am
Quoting Owuei
{quote} Oh I didn't see BlueRain post it seems that him was already working on it, sorry! I have uploaded a few posts ago a version that reads both buffers (spike and color line) and only then sends the alert/notification The issue is that when both buffers appear maybe you are 5 or more bars ago, that's why I created a function to specfy the bars lookback limit {file}

Thank you very much Owuei. BlueRain mentioned something about a Lag, dont know if that has anything to do with bars being behind. I know nothing of coding. But thanks for the help. Now I don't know who's going to do the last requests I asked lol. But see what you guys can do.

Really, thanks for the great work you guys doing.
  • #34,757
  • May 6, 2020 12:07pm May 6, 2020 12:07pm
Something like this

Attached Image


Quoting oluwagbenga
Hi friends,Please anyone that have this indicator, please share with me, Thanks {image}
Attached File(s)
File Type: ex4 BDMunormv1.01.ex4   60 KB | 463 downloads
  • #34,758
  • May 6, 2020 12:37pm May 6, 2020 12:37pm
Quoting Quin007
{quote} Thank you very much Owuei. BlueRain mentioned something about a Lag, dont know if that has anything to do with bars being behind. I know nothing of coding. But thanks for the help. Now I don't know who's going to do the last requests I asked lol. But see what you guys can do. Really, thanks for the great work you guys doing.
this indicator , is repaint / redraw.
indicator just doing new data calculation and so on.

when Old high CLOSE already identify,
then come New Higher CLOSE.
this how false came, it's like "False Break".
exam the CLOSE ,when indi give signal.
hope this might help
  • #34,759
  • May 6, 2020 12:55pm May 6, 2020 12:55pm
Quoting BlueRain
{quote} Although it is same code, unlike sub_window converting, converting Chart into MTF requires quite a lot of changes as it has to interact with current time frame chart buffer where buffer size is not same. Simple change to different timeframe doesn't work straight out. If I have time, I will check it out and will reply. I need to go over code line by line to understand what it does and has to change code for MTF.
If it can or if it can't, either way much appreciation to you BlueRain
  • #34,760
  • May 6, 2020 1:02pm May 6, 2020 1:02pm
Quoting santoso_am
{quote} this indicator , is repaint / redraw. indicator just doing new data calculation and so on. when Old High already identify, then come New High HH. this how false came, it's "False Break". hope this might help

Hey Santos, thanks for the reply. I understand what you saying yes, but looking at it, assume I made a trade at the old HH an my actual trend started at the new HH, I still wouldn't of made profit, the time and stress of scalping would of been dreadful between those old HH and new HH. But then again I would be loosing out on a few candles waiting for my new HH because of the look back an lag I suppose. But I guess it's safe to say not every trade is 100% and I'm comfortable with this indicator.
Ihope I had my theory lol

#BlueRian
#Owuei
#Santoso
111 traders viewing now, 2 are registered:
Skyrider60
,
saoco111