I will code your EAs and Indicators for no charge | Page 1257 | Crypto Craft

Options

Go to
Permalinks
Print Thread

Similar Threads

I will code your pivot EAs for no charge 28 replies

I will code your scalping EAs for no charge 163 replies

Oanda MT4 - Indicators and EAs not showing 2 replies

EAs and indicators relating to moutaki... 22 replies

InterbankFX has loaded its MT4 platform with custom EAs, indicators and scripts 1 reply

Attachments: I will code your EAs and Indicators for no charge
Exit Attachments

I will code your EAs and Indicators for no charge

  • #25,121
  • Jul 22, 2018 4:53pm Jul 22, 2018 4:53pm
Quoting danjuma
{quote} Hello ffjbentz, thank you for your reply. Unfortunately, the indicator you attached does not meet my needs. It does not list pending orders , it has no input options (like option to chose position on chart, font size, colour etc) whatsoever, and does not have the ability to display just the trades for the chart it is attached to (the indi display trades, which are just open trades, for all pairs)
correction to indi... it kept adding to the string...
Attached File(s)
File Type: mq4 TRADE_SUMMARY_INDI_V2.mq4   4 KB | 534 downloads
  • #25,122
  • Edited 5:12pm Jul 22, 2018 4:55pm | Edited 5:12pm
Quoting T4Trade
{quote}{file}
thanks
  • #25,123
  • Jul 22, 2018 4:56pm Jul 22, 2018 4:56pm
Quoting danjuma
{quote} Hello ffjbentz, thank you for your reply. Unfortunately, the indicator you attached does not meet my needs. It does not list pending orders , it has no input options (like option to chose position on chart, font size, colour etc) whatsoever, and does not have the ability to display just the trades for the chart it is attached to (the indi display trades, which are just open trades, for all pairs)
it should list all orders, including stop and limit orders... but i did not test it for that because i did n ot have any running
i will retest... ...
so ignore the last update, because it was not about that.
  • #25,124
  • Jul 22, 2018 5:01pm Jul 22, 2018 5:01pm
Quoting danjuma
{quote} Hello ffjbentz, thank you for your reply. Unfortunately, the indicator you attached does not meet my needs. It does not list pending orders , it has no input options (like option to chose position on chart, font size, colour etc) whatsoever, and does not have the ability to display just the trades for the chart it is attached to (the indi display trades, which are just open trades, for all pairs)
Yes it works correctly... see screen shot
http://prntscr.com/k9nmhf

here is a jpg
Attached Image (click to enlarge)
Click to Enlarge Name: pending_orders.JPG Size: 100 KB
  • #25,125
  • Edited 11:22pm Jul 22, 2018 6:20pm | Edited 11:22pm
Quoting Intrepidpips
{quote}[/list]Where might it be possible to view ALL 48 different Renko chart types? In my experience when Renko charts display long wicks above the specified Pips range, it is due to i, poorly coded Renko plugin, ii, insufficient computer resources iii, poor data feed. In the case of this screenshot,{image} if the wicks were part of the criteria inputted by the chart user, it might be excusable, if not, then one of those conditions must be affecting it. I'm no coder though so you may have some more insight that I'm not aware of.
The answer is in the referenced phylo post. You can take up 'your experience' with the source. My assessment is - your experience and attentiveness is lacking and further comment would be too far removed from your frame of references.
TSLA: 30-Dec-22 123.18 // 16-Jun-23 260.54 **111.51%**
  • #25,126
  • Edited 9:07pm Jul 22, 2018 8:56pm | Edited 9:07pm
Can anyone ADD an ARROW to this Keltner Channel indicator?

I'd like it to display an arrow on it's own like in this screenshot everytime it crosses and closes outside channel line.

Greatly appreciate if anyone can add this please.
Attached Image (click to enlarge)
Click to Enlarge Name: Screenshot1.png Size: 171 KB
Attached File(s)
File Type: ex4 (K) Keltner Channel.ex4   10 KB | 563 downloads
File Type: mq4 (K) Keltner Channel.mq4   5 KB | 657 downloads
  • #25,127
  • Jul 22, 2018 9:33pm Jul 22, 2018 9:33pm
Indicator or EA is there anyone that is actually working for */jpy only?
  • #25,128
  • Jul 23, 2018 12:26am Jul 23, 2018 12:26am
Quoting mw108
{quote} Here you go. Put "Symbols.mqh" into "MQL4\Include" {file} {file}

Hi mw108,

Sorry to bother you again

Could you please modify this indicator to change a group of pairs needed, like 10 pairs FX and 10 stocks?

Thank you so much again.
  • #25,129
  • Jul 23, 2018 12:38am Jul 23, 2018 12:38am
Hi all,

Can any one help me add a line to pic high/low points in to the RSI indicator like the yellow line in the picture?
Attached Image (click to enlarge)
Click to Enlarge Name: EURUSDH4.png Size: 58 KB



Thank you in advance.

Happy trading.
  • #25,130
  • Jul 23, 2018 1:59am Jul 23, 2018 1:59am
Sorry you missed å letter ore two you say copy tradepanel folder into mql4/files/???? Didnt get the last one...Thank you very much for help...
You win some you loose some do both with peace of mind
  • #25,131
  • Jul 23, 2018 2:25am Jul 23, 2018 2:25am
Quoting magne999
Sorry you missed å letter ore two you say copy tradepanel folder into mql4/files/???? Didnt get the last one...Thank you very much for help...
this is the actual place where you have to put the folder This what the author of the EA wrote to me right after i find the solution
"Hello,

Thank you for your comment on my EA (TradePanel). If you encounter some errors while compiling the code, make sure that you have extracted the provided .zip file in the specified path (\MQL4\Files\).

However, let me attach a complied version.

Kind regards
MhFx7 "

i hope you understood what needs to be done
  • #25,132
  • Jul 23, 2018 2:26am Jul 23, 2018 2:26am
Quoting ffjbentz
{quote} Yes it works correctly... see screen shot http://prntscr.com/k9nmhf here is a jpg {image}
Hello ffjbentz, thank you for your assistance and I much appreciate it. Unfortunately, the indi does not do what I want (meet my requirements).
  • #25,133
  • Jul 23, 2018 2:53am Jul 23, 2018 2:53am
Build My Exit Trade EA

Exit indicator (ATRTrailStop_v3) on 15M
-Partial Close-setting Period to 6, Multiplyer to 1.0. Take the number in the ATR of MT4 from when Research indicator
conditions met and use as Partial Close TP1. ie ATR 15M Period 6 shows value 8.2 then set TP1 to 8 Pips
-Trail the rest of the position using settings:-

-BackPeriod = 150
-ATRPeriod = 10
-Factor = 1.0
-MedianPrice = false
-MedianBase = true
-CloseBase = true
-distance = 0.0

-When the partial close has been hit then an automatic SL level 1pip above my entry and then after
the close of the candle follow ATR Trailing if it is above the SL level however if the ATR trailing
is below the SL level then keep SL level there until ATR Trailing is above SL level.
-Only move the ATR trailing price on the close of the candle

What I require

-A small panel on all open charts to buy/sell quickly. & option to hide/show panel with colour buttons buy=blue sell=red
ie with an arrow to quick hide/show or input to add/remove so no accidental order.
-small Markers on chart to show session ie asian, australian, london, NY (Only of current day)
-The MBFX Timing S indicator to work on multiple timeframes on a single chart for that pair it is put on.
ie chart on 15M candles but MBFX timing S indicator showing from a 1M for example.
-The ATR indicator to work on multiple timeframes on a single chart for that pair ie same as MBFX timing S.
also add the current ATR digits in points(not pips) on far right of indicator also option to remove
-manage all open trades at the same time with same pair (buy & sell orders maybe open at the same time) and other pairs
-hide all exit orders from broker ie TP1 & trailing positions. But allow me to see a little line on chart
where stops were
-Keep MBFX Timing S indicator standalone ie still as an indicator with Default settings.
*Only change is Multi timeframe view explained above
-Keep ATR indicator standalone ie still as an indicator with Default settings.
*Only change is Multi timeframe view explained above.
NB use MT4 ATR indicator from Insert\Indicators\Oscillators\Average True Range
-Allow to work on 5 digit or 6 digit brokers
-The ATRTrailStop_v3 to work on multiple timeframes on a single chart for the chart it's on
ie if ATRTrailStop_v3 is set to 15M timeframe then doesn't change even if chart is showing 5M
NB ATRTrailStop_v3 will be incorporated within the EA but also I am requesting that the indicator has the
additional feature of showing fixed Timeframe on chart as an indicator aswell

Varibles/inputs/options

-Keep all/same ATRTrailStop_v3 options changable
-Add option to Partial close/TP1 based on % or by Lots
-Option to show which sessions to show on chart or none
-Option to manage trailing on all open trades or on current chart or on defined pairs I choose
-Option to add a SL level of whole trade ie no partial close
-Option to open a buy/sell order based on % of balance, % free margin and set lots (lowest 0.01)
-Option to set ATRTrailStop_v3 to other Timeframes without changing the chart timeframe
-Option to add alerts of email or in MT4 when partial close and/or when trailing stop close
eg GBPUSD partial close buy @ 1.32112 +18.05
eg GBPUSD ATRTrail close buy @ 1.32220 +37.54
eg GBPUSD SL close buy @ 1.31500 -92.41
-Option to change sound on alerts or no sound
-Option to add comments or no comments
-Option to add Maximum Spread ie this includes opening and closing partial/trailing
-Option to add Maximum Slippage ie this includes opening and closing partial/trailing
-Option to move buy/sell panel around the chart with default at top left corner

I would like an EA written to close trades only, with a partial close feature and then close the
rest with an ATR Trailing stop after partial close has occurred.

PLEASE IF SOMETHING IS NOT CLEAR PLEASE DO NOT HESITATE TO ASK FOR CLARIFICATION. THANK YOU
Attached File(s)
File Type: mq4 ATR.mq4   4 KB | 500 downloads
File Type: mq4 ATRTrailStop_v3.mq4   5 KB | 511 downloads
File Type: mq4 MBFX Timing S.mq4   8 KB | 614 downloads
  • #25,134
  • Jul 23, 2018 3:29am Jul 23, 2018 3:29am
Guys

Please help me with this indicator. Just to make display BUY and SELL per symbol. I have been asking for help for days now. Just to remove Trades and replace it with BUY and SELL per symbol.

I thank you in advance
Attached Image(s) (click to enlarge)
Click to Enlarge Name: BSINFOR1.png Size: 50 KB
Click to Enlarge Name: BSINFOR2.png Size: 74 KB
Attached File(s)
File Type: mq4 Basket_Stats_ORIGINAL.mq4   16 KB | 653 downloads
  • #25,135
  • Jul 23, 2018 3:59am Jul 23, 2018 3:59am
Any suggestions on how to adjust code to update only at end of bar.

Indicator: Tdi-With Alerts

Currently tdi updates with every tick, i dont know where to insert code. Found several variations.

Code: The easiest way is to use standard OnCalculate(***) function and run the main cycle only if(rates_total>prev_calculated).
Also, in the main cycle try to have for(int shift=limit-1;shift>0;shift--){ (be attentive), and by the way, are you sure that you need shift=limit-1 not just shift=limit?

Or

int start(){
static aCurrentTIME = EMPTY;
if ( aCurrentTIME == Time[0] ) return 0; // .NOP/JIT/RET --^
aCurrentTIME = Time[0]; // .MOV/LOCK
// -------------------------------------------- // .CALC:
int limit = Bars - counted_bars;
...
/* update just the "HOT"-end has just got into OHLCVT[1]-cells */
// -------------------------------------------- // .FIN
}


Or

datetime calculatedBarTime;

void OnCalculate()
{
if ( calculatedBarTime != Time[0] )
{
onBar();
}
}

void onBar()
{
calculatedBarTime = Time[0];
// on bar logic....
}

last one received this comment: You may soon realise, that the New-MQL4 OnCalculate() handler does not work this way, it uses a block-arranged forward-stepping in undefined amount of mini-batches, so this calling onBar() will fail to process each and every Bar, as Custom Indicators obviously have to do. – user3666197 Aug 19 '17 at 6:42

-----

Also there is one minor error when i ran compile. Thats before trying to edit code for updating only at close of bar.
Attached File(s)
File Type: ex4 TDI-With Alerts v3.ex4   38 KB | 626 downloads
File Type: mq4 TDI-With Alerts v3.mq4   48 KB | 684 downloads
Success is never final, and failure never fatal
  • #25,136
  • Jul 23, 2018 4:18am Jul 23, 2018 4:18am
Quoting teodosy87
{quote} this is the actual place where you have to put the folder This what the author of the EA wrote to me right after i find the solution "Hello, Thank you for your comment on my EA (TradePanel). If you encounter some errors while compiling the code, make sure that you have extracted the provided .zip file in the specified path (\MQL4\Files\). However, let me attach a complied version. Kind regards MhFx7 " i hope you understood what needs to be done
I cant get it to work i both copied pasted mq4 folder too files and tradepanel folder too files and experts and and mql4 file too experts...so i dont know i can see the author sendt you a comlied verson can you please post it here
You win some you loose some do both with peace of mind
  • #25,137
  • Jul 23, 2018 4:24am Jul 23, 2018 4:24am
Got it to work thank you very much
You win some you loose some do both with peace of mind
  • #25,138
  • Jul 23, 2018 5:03am Jul 23, 2018 5:03am
Quoting magne999
{quote} I cant get it to work i both copied pasted mq4 folder too files and tradepanel folder too files and experts and and mql4 file too experts...so i dont know i can see the author sendt you a comlied verson can you please post it here
Most probably the issue is this when you unzip the folder tradepanel you have to click it and there is another folder called tradepanel you have to copy the second one otherwise it will not work. Try it and it will work for sure .
  • #25,139
  • Jul 23, 2018 8:31am Jul 23, 2018 8:31am
Quoting Phylo
{quote} The answer is in the referenced phylo post. You can take up 'your experience' with the source. .

Why would you say "...the referenced phylo post.." like Phylo is a third person, is this an additional user name?


I am satisfied with the Ovo range and their Mean Renko gives as good an output as Flex Renko (just think outside the box)
Attached Image (click to enlarge)
Click to Enlarge Name: RM 96.png Size: 75 KB


The attached screenshot was obtained from a free Mean/Median/Better Renko chart generator and please note that they have passed the rookie stage of "False wicks" (you can take that up with your source).

Cross reference it with your own screenshot and tell us which has more clarity

If you have to research further, here is the free EA
Attached File(s)
File Type: ex4 evolution_renko_ea_v1_31.ex4   28 KB | 634 downloads

Attached Image (click to enlarge)
Click to Enlarge Name: RM 97.png Size: 67 KB
Let it turn and find your entry.
  • #25,140
  • Jul 23, 2018 8:35am Jul 23, 2018 8:35am
Quoting Phylo
{quote} My assessment is - your experience and attentiveness is lacking and further comment would be too far removed from your frame of references.
The old saying is true, " If you look a gift horse in the mouth, it will spit in your face"
Let it turn and find your entry.
204 traders viewing now