Menu
Sister Sites

Options

Bookmark Thread

First Page First Unread Last Page Last Post

Print Thread

Similar Threads

I will code your pivot EAs for no charge 24 replies

I will code your scalping EAs for no charge 163 replies

Oanda MT4 - Indicators and EAs not showing 2 replies

EAs and indicators relating to moutaki... 22 replies

InterbankFX has loaded its MT4 platform with custom EAs, indicators and scripts 1 reply

Attachments: I will code your EAs and Indicators for no charge
Exit Attachments

I will code your EAs and Indicators for no charge

Quoting jblanked
{quote} Try this brother int CalculateSymbolLeverage(const string symbol) { int leverage = -1; double margin = 0.0; double lots = 1.0; if(OrderCalcMargin(ORDER_TYPE_BUY, symbol, lots, SymbolInfoDouble(symbol, SYMBOL_ASK), margin) && margin > 0) { double tickValue = SymbolInfoDouble(symbol, SYMBOL_TRADE_TICK_VALUE); double tickSize = SymbolInfoDouble(symbol, SYMBOL_TRADE_TICK_SIZE); double lotValue = tickValue * SymbolInfoDouble(symbol, SYMBOL_ASK) / tickSize; leverage = (int)MathRound(lotValue / margin); } return leverage; }
thank you brother , I'm trying to use it in the comment but I'm getting error:
"'
"'CalculateSymbolLeverage' - wrong parameters count "
at my comment line:
Inserted Code
CommentString+="\n"+"Symbol Leverage :  "+IntegerToString(CalculateSymbolLeverage());
am i doing something wrong?
Quoting Paymanz
{quote} thank you brother , I'm trying to use it in the comment but I'm getting error: "' "'CalculateSymbolLeverage' - wrong parameters count " at my comment line: CommentString+="\n"+"Symbol Leverage : "+IntegerToString(CalculateSymbolLeverage()); am i doing something wrong?
Yessir, you are missing a value for the first parameter, the symbol.
Software Developer and Music Producer
News Fundamentals All Time Return: 1,159.1%
Quoting chipsngravey
Hi guys hope you are all well. I would like to ask if one of you wizards would be able to help me with a request on an old indicator, i use or should i say used to use this one but for some reason it has stopped updating the signals. It has the same problem I've seen here with some others so i don't know if it's possible for someone to fix as i know nothing about coding!, the indicators little info panel is all working live ok but to see the latest signal you have to go up or down one timeframe and back again and then it shows the latest signal....
The indicator which you posted is decompiled, and it's a big mess.
The signals are this indicator:
Attached File(s)
File Type: mq4 SHI_SilverTrendSig.mq4   4 KB | 33 downloads

https://forex-station.com/app.php/attach/file/3334174
Be Right and Sit Tight !
Quoting mrtools
Try now. {file}
i was trying.. but your induk does not work correctly on real charts.

i didn't see critical errors in Ctrl+T tab.. but your induk permanently blinks, expands itself.
sometimes Bands disappear from chart, but Center line remains... or induk disappears from chart altogether

also i made video on D1... it's veeery strange induk

Quoting jblanked
Perfect timing man. Just after I finished creating a different version. Thank you for your help and for replying so quickly.
Quoting BestTraderEv
Thanks to mrtools: {file} {file}
what do you thank mrtools for?
or in your society, crooked-hands coders always thank each other for crooked code??

Quoting Tictak
Вместо того чтобы сорится нагнулибы MetaTrader чтобы сделали нормальную платформу.Или я говорю что в...
ты тоже такой интересный
я так вообще ни разу не программист = у меня гуманитарное образование.. я трейдер-разработчик, трейдер-исследователь.. всёё..
и до 2015 года я даже не знал, что такое МТ4.. я торговал на других платформах.

так кто будет нагибать MetaTrader? Младен с МистерТулсом??
они нормального индюка не могут написать думаешь они смогут создать торговую платформу!?
посмотри на них: они прикинулись дурачками = как-будто то, что они пишут = так и должно быть.. и пипл хавает их дерьмо
Attached Image (click to enlarge)
Click to Enlarge Name: Kijun Sen Keltner bands [mrtools].gif Size: 531 KB
Attached File(s)
File Type: zip Kijun Sen Keltner bands [mrtools], D1.zip   5.0 MB | 21 downloads
study indicator settings and test it well...
Quoting yoko
{quote} Hi coders, Could you please code an indicator of candle range size for mt4/mt5 (from low to high) not just body. I would be very grateful.
https://www.forexfactory.com/thread/...4#post14992734
Be Right and Sit Tight !
Quoting keepitup
I’m having trouble, I place my SL above my entry, the chart keeps hitting my SL then going in my direction. This happens to me constantly
And what does that mean?
Do you expect someone to teach you how not to trade?
For example, do you know what spread is?
Be Right and Sit Tight !
Quoting jblanked
{quote} Yessir, you are missing a value for the first parameter, the symbol.
i see, i corrected it and it compiled with no error:
Inserted Code
CommentString+="\n"+"Symbol Leverage :  "+IntegerToString(CalculateSymbolLeverage(Symbol()));
but the value it returns is "-1"
Quoting Radza
{quote} Hi, could you enlighten me with the synatical modification you have made ? And why the Combo_Countdown check part does not display ? For it is supposed to operate another bar counting process. Thanks
I am sorry, but I don't intend to go through your whole code and all your ideas.
You hve your original, I hope, you have my version, you can compare.
Be Right and Sit Tight !
Quoting Paymanz
hi everyone , how can i calculate the symbol's leverage in mt5? anyone can please help with a loop that returns symbol leverage?
There is no function which returns symbol leverage, only account leverage.
And, there is no reliable method to calculate that, either.
So, it's best to code input SymbolLeverage = 20; (or whatever).
But, you can try what jblanked provided.
No guarantees that it will work for every broker.
Be Right and Sit Tight !
Quoting BestTraderEv
{quote} The indicator which you posted is decompiled, and it's a big mess. The signals are this indicator: {file} https://forex-station.com/app.php/attach/file/3334174
Thank you so much too for the reply BestTraderEV, yes it's a very old dodgy one mate, just thought i'd pop it on the forum to see if i could get any info/help, and you guys have been great, thank you, i'll check out the link you posted.
@BestTradeEv @jblanked

I trust that you are well.

Reference is made to Post #71,472. I began coding the same using MQL5 manual, articles from MQL5 website, and Metaeditor Co-pilot. For reference, I have no coding experience.

I successfully compiled the code, but it is not executing trades. Initially, prior to including the risk and stop loss parameters etc., the code was executing trades as desired.

Can you take a look at the logic and guide me as to where I may be incorrect? I will try to make the changes using the resources above as it can prove to be a learning opportunity.

Thanks in advance for accommodating!

Regards.

NB: The Code attached herein is incomplete, please be forewarned, if using for your own purposes.
Attached File(s)
File Type: mq5 1314.mq5   10 KB | 9 downloads
Twin Island Trader | TheRealMissionMan:-I am, because we are.
The Power of Patterns and Principles Return This Month: 9.6%
Quoting Spawn48
@BestTradeEv @jblanked I trust that you are well. Reference is made to Post #71,472. I began coding the same using MQL5 manual, articles from MQL5 website, and Metaeditor Co-pilot. For reference, I have no coding experience. I successfully compiled the code, but it is not executing trades. Initially, prior to including the risk and stop loss parameters etc., the code was executing trades as desired. Can you take a look at the logic and guide me as to where I may be incorrect?...
Attached Image (click to enlarge)
Click to Enlarge Name: 2024-09-11_175728.jpg Size: 168 KB


The highglighted are not in MQL5 or MQL4.
Please don't post such silly codes, because nobodyy here is going to bother with this.
And, if you expect help, post the whole code in .mq4 file attachement.
Be Right and Sit Tight !
Quoting BestTraderEv
{quote} {image} The highglighted are not in MQL5 or MQL4. Please don't post such silly codes, because nobodyy here is going to bother with this. And, if you expect help, post the whole code in .mq4 file attachement.
Received and acknowledged. Thank you for your response. Please note that the highlighted neither forms part nor can be found in my .mq5 code. This perhaps was added when I had previously toggled with the 'text color' feature herein. Apologies for the inconvenience caused. Kindly see the attached .mq5 file hereunder for reference.
Attached File(s)
File Type: mq5 1314.mq5   10 KB | 11 downloads
Twin Island Trader | TheRealMissionMan:-I am, because we are.
The Power of Patterns and Principles Return This Month: 9.6%
Quoting BestTraderEv
{quote} I am sorry, but I don't intend to go through your whole code and all your ideas. You hve your original, I hope, you have my version, you can compare.
You're right. I did compare. I have a remodified version, but still contains some issues. Would you help me ?
Attached File(s)
File Type: mq4 TD-Combofixed3.mq4   28 KB | 16 downloads
Quoting Spawn48
{quote} Received and acknowledged. Thank you for your response. Please note that the highlighted neither forms part nor can be found in my .mq5 code. This perhaps was added when I had previously toggled with the 'text color' feature herein. Apologies for the inconvenience caused. Kindly see the attached .mq5 file hereunder for reference.{file}
I know where the [color=Black] come from.
You are not supposed to use the color tags in the code section, because those tags are code, too.
So, if you want to be a coder, you need to know such basics.
And, when you posted your new reply, you should check the result, and modify if something looks wrong.
Anyways, it's always best to post your codes in .mq4 files, unless it's just about some small code snippett.
Be Right and Sit Tight !
Quoting BestTraderEv
{quote} I know where the [color=Black] come from. You are not supposed to use the color tags in the code section, because those tags are code, too. So, if you want to be a coder, you need to know such basics. And, when you posted your new reply, you should check the result, and modify if something looks wrong. Anyways, it's always best to post your codes in .mq4 files, unless it's just about some small code snippett.
Received and acknowledged. I understand. Thank you for informing me. I have made the corrections above.

Regards.
Twin Island Trader | TheRealMissionMan:-I am, because we are.
The Power of Patterns and Principles Return This Month: 9.6%
Quoting Spawn48
{quote} Received and acknowledged. Thank you for your response. Please note that the highlighted neither forms part nor can be found in my .mq5 code. This perhaps was added when I had previously toggled with the 'text color' feature herein. Apologies for the inconvenience caused. Kindly see the attached .mq5 file hereunder for reference.{file}
I do it like this:
Attached File(s)
File Type: mq5 1314.mq5   9 KB | 10 downloads


Also, you can't MonitorBreakeven in the OpenPosition function.
And, you can't MonitorBreakeven by ticket.
You need to MonitorBreakeven by MagicNumber, or by _Symbol and MagicNumber.
And, you should do all the monitoring in the begining of OnTick(), before the OpenPosition part.

And, you don't need to monitor slippage, because you predefined your slippage preferences in OnInit().
Be Right and Sit Tight !
Quoting BestTraderEv
{quote} I do it like this: {file} Also, you can't MonitorBreakeven in the OpenPosition function. And, you can't MonitorBreakeven by ticket. You need to MonitorBreakeven by MagicNumber, or by _Symbol and MagicNumber. And, you should do all the monitoring in the begining of OnTick(), before the OpenPosition part.

Received and acknowledged. I will check it and follow through with your advice.

Thank you very much!

Regards.
Twin Island Trader | TheRealMissionMan:-I am, because we are.
The Power of Patterns and Principles Return This Month: 9.6%
Quoting Spawn48
{quote} Received and acknowledged. I will check it and follow through with your advice. Thank you very much! Regards.
Check again, because I made some changes.
Attached File(s)
File Type: mq5 1314.mq5   9 KB | 13 downloads


And, you don't need to monitor slippage, because you predefined your slippage preferences in OnInit().
Also, redownload, because I forgot to check the positions for MagicNumber.
Be Right and Sit Tight !
Quoting Radza
{quote} You're right. I did compare. I have a remodified version, but still contains some issues. Would you help me ?{file}
What are the issues?
Like I said, I don't like to study someone else's idea and try to figure out what their issues are.
And, if by issues you mean those compilation errors, please don't expect me to fix your problems!
You either can code, or you can't.
If you can't, you need to learn.
In order to learn, You must fix your own issues!
Be Right and Sit Tight !
41 traders viewing now, 5 are members:
yoko
,
JamshidA
,
,
TheJurgFX
,
PabloPitty